If the user enters a numeric value in Range ("B" & Rows.Count).End(xlUp).Offset(1), I need the code to copy the formulas in Range ("A12,C12:V12") to Offset row If there is no user entry in Range ("B" & Rows.Count).End(xlUp).Offset(1) then nothing should happen.
This should be monitored in sheet at all times.
I`ve done som research and think the code must be entered as a Private Sub Worksheet_SelectionChange(ByVal Target As Range) sub?
I wish to monitor a change in a certain columns at some worksheets. I have - after having consulted John Walkenbach' fantastic book Excel 2007 Power programming with VBA - understood how I do to monitor a change in specific worksheet, by using the Intersect-function in the change-event on that particular worksheet. That works fine.
My situation is that I have an application that I start out with a certain number of workheets in a workbook, and in the course of the work that the application does, it now and then adds worksheets, and these worksheets I would like to monitor for change in a special column. I know, by looking at the names of the worksheets which ones of those in the collection that I want to check.
I therefore used, not the Worksheet_Change event but the Workbook_SheetChange. It doesn't work quite well. I guess my question for now would be:
The call to this event looks like this:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
1) How - in what way - should I use the first argument, the "Sh as Object"? Can I/Should I give it a name?
The error message I get when I use an instruction like this:
If Not Intersect(Target, Range(M:M)) Is Nothing Then
'Do Stuff
end if
The method 'Intersect' in the object '_Global' failed
(M is the column that I want to check)
Is it possible to use the Worksheet_Change command to monitor 2 different cells in the same worksheet and call a different procedure depending on which cell is changed. i.e. if cell A1 is changed do this, if cell a2 is changed do that
View 9 Replies View RelatedIm trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
I have no experience with macros at all but i need to create a macro for work that will keep the original data entered but work out the difference between new data collected each day ...
View 10 Replies View RelatedI have a requirements to do a simple monitoring data entry. Composed of 1 admin and 10 users. These 10 users are assign to a different lines basically every lines have assigned user.
These 10 user will do a data entry. once they are done on the data entry the Admin will update those entered by the users based on ticket number and the users can browse those updated records.
Every users per line have assign ticketnumber that start in "L1"&YY&MM "-"001" this compsed of lines + year+month and numbers.
For the users side. Right now i have already created a workbook with userform to perform data entry by user (samplefor line1 and line2 user).
It has also a viewing form to view by the users if its already updated by the admin. i put also an events if the admin work book is open by other user they cannot access the workbook.
For admin side. I created also a userform for updating the records entered by the users to update records admin will enter ticket number to textbox.
This is the reference to find and search those records that belong to a particular ticket number and lines which will be updated by the admin.
Right now, I am doing records consolidation for both user and admin records. I have a button for both admin and userlines to perform consolidation. Once the user entered the records admin will capture those records and copy to the workbook used by admin to perform update. Then once the admin perform update the user will capture those updated by admin and copy to the workbook under the user.
Basically they have separate workbook for their entry and database.
Right now I encounter some issues which I think this will affect the integrity if records. Sample like once i perform consolidation it create duplicates records.
I have an input box that takes in a file name. Obviously, sometimes people put in illegal characters which can't be used in a file name and I need to deal with this. I can check the variable once they have pressed enter but is there a way to check it as they type it in?
It would be very nice to either have nothing happen if they type in a slash or for a msgbox to pop up, as it does in Windows,
I have data in a worksheet coming from an external device that is updated via DDE. The values in the cell change every few seconds. I would like to record the highest and lowest values that these cells contain.
I want the peak values to be stored in other cells.
Automatically Change Sheet Tab Name With Cell is listed below for convenience
$A$2 contains a formula...the code doesnt work on a formula. if i overwrite the formula, THEN the code works and the sheet tab is named to whatever i type in the cell
but how do i make it work with a formula? ...
We have a few residential care homes across UK. I have a workbook where I store all our residents fees which I update daily. There are 2 worksheets on one I store list of residents on the other one I have a daily breakdown.
What I'd like to do is to use worksheet "daily" to sum fees from "all residents" with criteria like:
- carehome ("daily" row 2),
- fee ("daily" F:K,N:S,V:AA etc)
- date ("daily" C7:C1073).
While fees are on worksheet "all residents" where:
- column A has carehome name on it
- column M to AG has fees on it
- row M3:AG3 has dates on it
For example id like to count in cell F7 how many residents in Branch Court "Bc" were in residency on 12 March 2012 with £520 fee looking on worksheet "all residents" with criteria fee, carehome,date)
Each time one of the council backdates fees or changes a resident to lets say a private one I have to manually change all the numbers which takes time.
res.xlsx
I need to set a cell colour by the value of a cell in another sheet so i can't use conditional format. Is there a formula that allows the user to set a cell style, colour, font etc.
View 9 Replies View RelatedI am working on a Workbook for my wife to use at school. It's basically a grade-book that automatically fills out the report card for each kid. In column A I have a list of each student's name. I also have those hyper-linked to each sheet for easy access.
I would like to be able to change the names in column A on Sheet 1 and it also change the names on the corresponding sheet it is hyper-linked to. I have seem some similar post but I can't seem to get any of those formulas to work. I get an invalid sheet name error. Maybe I'm not inserting the code properly or it has something to do with my hyperlinks. This is driving me crazy not being able to figure this out. I just want to make it as simple and easy for her to use year to year.
When I select a specific sheet I would like cell A1 to be selected using VBA.
View 2 Replies View RelatedI have workbook with two sheets "Path A" and "Path B". Whenever I activate worksheet "Path B", I want to activate the cell in "Path B " which was the active cell in sheet "path A". For example, if cell R1 was active in path A when Path B was activated, R1 should be made the activecell of Path B. Tried the follwing code... not working.
Private Sub Worksheet_Activate()
Dim r As Integer, c As Integer
r = Worksheets("Path A").ActiveCell.Row
c = Worksheets("Path A").ActiveCell.Column
Worksheets("PathB").Cells(r, c).Activate
End Sub
I would like to create a macro that will automatically change the name of the sheet any time a value is entered into cell a1. For example, in cell A1 of sheet1 I would input "Hello", and then the tab for sheet1 would be automatically renamed to "Hello".
Here's the twist - the workbook will have multiple sheets, and I want all tabs to reflect the value of a specific cell (a1) in each sheet.
For example:
value in sheet1, cell a1 = "Yes" - corresponding tab name would change to "Yes"
value in sheet2, cell a1 = "No" - corresponding tab name would change to "No"
value in sheet3, cell a1 = "Maybe" - corresponding tab name would change to "Maybe"
etc...
The "tab change" cell would always be cell a1 in each sheet.
I can't use code for this problem as I need to give this to someone who doesn't know VBA. They will need to use it in several different reports, so I can't produce something in VBA very easily. I have three worksheets, Summary, Year1 and Year2.
I want to display either Year1 or Year2 data in the Summary sheet depending on what the user enters in a cell in the Summary sheet. For example, if the user enters "Year1" in cell E2 then I want to point to a cell in the Year1 spreadsheet.
I tried using formula: =E2 & "!B3" but this doesn't work. Is there another solution? I have attached an example.
I am using an event macro to trigger a set of calculations. In the spreadsheet, users have a choice of 3 input cells to work out an answer; these 3 cells work out the same cost from different angles depending on the variables available to the user.
Users only ever need to fill in one of the three cells to work out the answer as the event macro I designed, should (upon input by the user), work out the remaining two input cells using logical arguments.
The macro and calculation work fine, except in the event of users amending a value in an input cell previously updated; in other words, if all 3 cells contain a value and 1 of them is being changed by a user.
The issue: I need the event macro to recognise the location of the last change made by the user in order to determine which 2 of the 3 cells need to recalculate. However, users will invariably press enter or tab etc... upon making changes and this has caused me issues so far.
What I have tried already:
1) running another event macro "on selection change" to record elsewhere in the model all cell selections as and when the user interacts with the model
EFFECT: it made the "on change" event macro very slow and clunky; so I need to avoid
2) declaring a range as set r = activecell.address
EFFECT: this did not work as the active cell's address would in fact be the address on the last cell; e.g. the one selected further to pressing enter (often the one directly below the cell recently changed)
A solution to add to the existing "on change" event macro that identifies the last edited cell
I want to change the fill color of all cells on my sheet, based on the value of one specific cell. In my sheet, I am using cell F1 as the trigger for the change. If the word Blue is in the cell, I want the background color of all cells to be Blue. Likewise for Red and Yellow as well. I don't believe conditional formatting can get this done, as all but the one cell (for this) will be empty.
View 2 Replies View RelatedI have a master workbook that is referencing data from several other workbooks whose file names are based on the years data was taken. In the master work book on any given sheet, I would like to be able change the data being used in the formula calculations by simply changing the year value in a single cell. By changing the date value, the formulas are directed from one data workbook to another.
e.g. in the master workbook in Sheet1, if you enter 2008 into cell A1, all of the formulas in Sheet1 now pull values from 2008.xls; if 2008 was replaced with 2009 in cell A1 on Sheet1 of the master workbook, then all of the formulas on Sheet1 would now pull values from 2009.xls.As I am completely new to VBA (bought my first book last night), I am looking for any help that is out there. I am not entirely new to programming (used C++ to write numerical simulations) but I have zero experience writing macros and the like.
I am trying to copy an entire row to another tab based on when a cell changes. The column where the change will come from in colum N. I am using this code based on what I have read on this board, but cannot seem to get it to work correctly.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim LC As Integer, iCol As Integer, Found As Range
iCol = 14 'column containing K
LC = Cells.Find(what:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByColumns).Column
If Target.Column = iCol Then
Select Case Target.Value
[code]....
In the end what I would like to do is everytime there is a change in column N, the macro copies the information from that row into the other tab. I would like the information to overwrite anything that is alraedy in that tab as well. So if someone accidentally putc in a C instead of a K, it will not keep that information in the wrong tab.
I have this code on my sheet1:
VB:
Private Sub Worksheet_change(ByVal Target As Range) Dim KeyCells As Range
Set KeyCells = Range("K:K")
If Not Application.Intersect(KeyCells, Range(Target.Address)) Is Nothing Then
If ActiveCell.Value = ActiveCell.Offset(0, -6).Value Then
ActiveCell.Offset(0, 1).Value = ((ActiveCell.Offset(0, -4).Value) * (ActiveCell.Offset(0, -5).Value)
End If
End Sub
Now I would like to add another code: When I will change value in actual cell (sheet1) then copy value from cell A1 (sheet1) to the first free cell in column A (sheet2). I still have problem with error that I am out of range if I tried to copy it to sheet2.
I have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
I have an excel workbook that has many spreadsheets (each one sheet has a client name)I have another excel workbook that has these client names on one sheet (on a list) and next to every name I have a number (i.e total turnover of the year).
In the first workbook (where every client has his sheet (tab named after the client) I want to have a cell that equals to the sum of some cells on the other workbook, that refer to the specific client
(it looks like this ='[comissions NF 10-14.xls]comissions 14(auto)'!$J$81+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$197+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$313+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$429)
I want this sum to be added to every sheet of this workbook. each sheet refers to a client, so $J$81, $J$197 etc must be changed for the correct cell that refers to the name of the client. The tab names are alphabetical and so s the list.
Is there any way to do it, without re-entering the formula to each one?
I am trying to create a formula that will change the cell color in a range of cells in the row. I want the color to change based on the information in a particular cell appearing on a different sheet. What sheet the information is on determines the color the cells change to.
Example: I have 4 sheets I am working with. We will call them A; B; C; and D. I would like the color of cells A5-I5 on sheet D to change to red when the information in cell A5 from Sheet D shows up in any cell in column A on sheet A. If the information from cell A5 sheet D appears in any cell in column A from Sheet B then the color will be yellow, etc.
need to do to the below code so that when i drag the formula down it changes the sheet number....sheet1, sheet2, sheet3 and so on but keeps the cell reference the same?
View 4 Replies View RelatedI have a macro code for conditional formatting. The first 2 lines of the macro are
Private Sub Worksheet_Change(ByVal Target As Range) ....
First off I have an excel sheet that I have split into two windows. excel sheet.jpg
I am looking for a formula that will change the bottom sheet number a color if it exists on the top sheet.
I have a bit of code in sheet two of my document that requires user input to produce output. However I have the document set up in a vway that requires the actual input to be placed in a vell in sheet one, and the cell in sheet two is just "=cell in sheet one". This causes the input cell in sheet two to change but the output cell does not produce the new answer.
View 4 Replies View RelatedSub OptionButton222_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = False
.Shapes("Notch 2").Visible = False
End With
End Sub
Sub OptionButton223_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = False
.Shapes("Notch 2").Visible = True
End With
End Sub
Sub OptionButton224_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = True
.Shapes("Notch 2").Visible = False
End With
End Sub
i need to modify it so that a selection on the beam input page causes the images to change on the beam output page. Currently this code is in the module section of VBA.
How do i change the below code to not reference a named sheet but the active sheet.
In case you need it i'm trying to sort columns A:CQ on row 2 smallest to largest from left to right.
Code:
Sub Sort_Left_Right()
' Sort_Left_Right Macro
Columns("A:CQ").Select
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Add Key:=Range("A2:CQ2") _
, SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
[Code ..........