I am trying to see if it is even possible to have data validation applied to a specified range of cells, but if the value of cell 'B3' is '1' then the data validation will not run on the other cells (H4:G7)
View 2 Replies
I am trying to find something that would allow me to have a spreadsheet clear the contents of a certain cell based on the selection made from a data validation list which resides on the same row. This can best be described with an example.
The user selects anything but " " or "none" from the validation list, which for this example resides in C5, would trigger code to clear the contents, if any, in AA5. If " " or "none" is chosen the value remains.
This capability should be available for each row through 100.
Need VBA macro that will copy & paste (Special > AS VALUES) from one of two (Data A & B) sheets based on the contents of a validation cell ($D$4) in a third (Report) sheet? The destination starting cell would be $F$11. ALSO - I'd like to have the Named Ranges "DataAExtract" & "DataBExtract" used in the code (for the COPY region) so I can see an example of how to reflect my actual named ranges in my working file.
The reason for doing this is that the "c.Characters...." lines in my conditional formatting macros (attached) are not working on cells containing formula output (in my working file the Report page is all populated by VLOOKUP results), but the macros run fine on hard-coded values. In my attached workbook, I'd like to have the "NEW" macro for the copy & paste step fire first in the sequence of macros running after the FORM button-click (control located in cell $D$5 of the Report sheet), whether that's by writing a new macro and calling mine before the new one ends, OR by consolidating all of my macros plus the new one into one smooth progression.
With this low-tech approach I can get updated VALUES into the report area once the user selects a data source and a customer on the report sheet. The COPY ranges in my working spreadsheet will update based on the selections made in the report page. I tried recording a macro and then modifying the recorded code to add the "If > Then" functionality I'm looking for, but I'm pretty green when it comes to VBA code and syntax.
I am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
I'm am trying to set up a household finances dashboard in excel - What i'd like to do is categorise & tag HH expenditure based on part of the description within a bank statement, the desired result being:
account tagging.jpg
My ideal solution would be some kind of lookup with a table containing the keywords & corresponding tags to match part of the description to, as this will allow easy management of the tags, situations where I have multiple keywords for the same tage (supermakets for example), and so forth. Is this possible?
Currently I am using a very large nested forumula which i've cobbled together based on searching for ideas. It works, but managing new tags is difficult, part of the formula i'm using is:
=IF(ISNUMBER(FIND("00111888",'JOBSFPCUR-20140414'!C4)),"Pete transfer",(IF(ISNUMBER(FIND("LAURA",'JOBSFPCUR-20140414'!C4)),"Laura Pocket Money",(IF(ISNUMBER(FIND("TESCO",'JOBSFPCUR-20140414'!C4)),"Supermarket")))))
I am trying to write a macro to do the following: Loop through a range of cells on a worksheet Sheet1 M17:M46 and if there is text in the cell then Copy all the data to the left Of Coumun M in the same row and paste the values to the next open row of a range A17:L46 on another worksheet (sheet2.) Basically the text in column M is an idicator to add the data to an order sheet. If there is no text don't add the data , look in the next row etc.
I'm not sure if this is the way to go
Sub CopyRows()
Worksheets("sheet1").Select
FinalRow = Range("M65536").End(xlUp).Row
' Find the last row of data
' Loop through each row
For x = 2 To FinalRow
' Decide if to copy based on column M
ThisValue = Range("M" & x).Value
' could be any value
If ThisValue = "yes" Then
Worksheets("sheet2").Range("A" & x & ":L" & x).Copy
Worksheets("sheet1").Select
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.PasteSpecial = xlValues
Worksheets("sheet1").Select
End If
Next x
End Sub
I have already set up a data validation, if if you pick a region, you only get that regions items in the next column.
A
B
C
D
E
[Code]...
But what I would like to do is in Column E(for this example) have 3 extra lists for Location in each region. So if I pick S in A, then in E I only want the Southern options.
I have checked out this website, but I cant seem to work out how to add the third dependence [URL]....
I am trying to set the data validation on a cell based on another cell value
So basically if the User enters say CAN in cell A2, cell B2 should use "listCAN" range as the data validation list
and if i enter US in A2, B2 should use "listUS" as the data validation list
I'm trying to have a Data Validation list issue where I want to populate a second list based upon the value of the first list.
In this instance I have a Department in the drop down and Employee Name in the second drop down and I want people to only see Employee names if they're allocated to a particular Department. I've been able to do the list using the INDIRECT function, however that only works when there's only a small sample of both names & depts, however I'm looking at populating this document with around 3000 people and over 250 departments, so I would like to be able to use Column J on the Source Tab to populate the details on the Manager Entry tab.
I have attached a sample spreadsheet if I've not explained very clearly.
TIMESHEET sample.xlsx
I'm working on a few dynamic KPI charts and could use a little help with figuring out data valuation for the End Date value. In the attached workbook I am using data validation to pick a start date from a dynamic list (Dates) in E2:Exxx. Cell B2 has 2/8/2010 picked. I would like to have a drop down in B2 show the listing of all dates in E2:Exxx which occur after 2/8/2010, so the filtered list would be in the range E3:E49.
View 2 Replies View RelatedI have created a template using data validations. I have a drop down in column O, which you can choose from Credit or Charge. In column V, I want:
- If selected Credit in column O, only negative numbers allowed in column V
- If selected Charge in column O, only positive numbers allowed in column V
I want to control what a user enters into a single cell based on others.E.g.
A B
1 20 500
2 50 500
3 75 500
4 100 300
Column A is a thickness and column b is a width what I want to happen if the user enters a thickness in cell D1 and a width in cell D2 I want an error to pop up if for instance the user enters 100 as a thickness to only allow a maximum of 300 in the width. likewise if the user enters a thickness less than 100 in cell D1 to allow him to enter up to 500.
I'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.
View 2 Replies View RelatedI thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies View RelatedI'm trying to add a line of code to filter some data based on a date in the range cell C3.
This is my code;
[Code] ....
It doesn't seem to work.
I want to have a cell that looks at another cell based on a number that is in another cell. So imagine if you will: A1 contains the number 25. A2 contains the formula I can't work out. I want it to look at the row that is the number contained in cell A1, so in this case it would look at row 25.
Now I want to narrow it down further to a cell in that row but this will be a constant so lets say column F. So if A1=25 then A2 would display what ever is in F25. If cell A1 were 16 it would display the contents of F16 etc. The best I got was something like =IF(A1=>1,(F(A1))) but obviously that is wrong as it doesn't work.
I want to add a row underneath a row if the value in the in B cell is not = "". Then i want to write a value in the C cell of the new row.
View 2 Replies View RelatedI have attached a sheet that I am working on. I want cell G1 to be less than or equal to 165. That cell contains a formula. If the formula takes the number to over 165 the validation is allowing it.
View 2 Replies View RelatedI am in the process of reformatting an excel workbook to act as a review tool for different factors in a process. Part of my redesign includes the use of coding that creates different cell colors based upon the cell contents. The new workbooks will be used to handle existing data for this year. I have developed a process macro to open an existing workbook and copy and transfer the original data worksheet into the newly formatted workbook. The data gets transferred to the new worksheet and the resulting workbook is renamed and saved, Heres'' the rub... the newly saved workbook is missing all of the coding for the worksheets... apparently this is a MS bug.
Has anyone figured a workaround for this. One thought I had is to open both( new and old )workbooks and rather than move/copy , i would transfer the data using cell references.
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedI am trying to find some VBA that will allow protected cells to be updated when a user enters or selects data in other cells.
For example:
Cell 'A1' starts out blank.
Cell 'B1' has a drop down to select specific items.
Cell 'C1' is the date of the order and is a locked cell.
Cell 'D1' is the date of completion and is a locked cell.
The worksheet is protected to prevent direct changes to cells C1 and D1.
If a user enters any information in A1, then C1 displays the current date.
If a user selects 'Complete' from the drop-down list in B1, then D1 displays the current date. Both of these actions are independant of one another. This format is the same for every cell in the 4 columns indicated above. I thought I was able to do this in another spreadsheet I created a year or so ago but I have not been able to figure out what I did and I do not have the spreadsheet to look at.
Is it possible to dynamically chance the name of at a worksheet that already exists based on the contents of a cell on another sheet?
I.e. If the name of a sheet is linked to the value of the Cell A1 in the "Data" sheet and I change A1 to read "Group1" it changes the name of the sheet as well?
I am working on a sheet where I want the contents of cells D1:D10 appear if cell A1 has a text in it and the contents of cells D1:D10 disappear if cell A1 is blank. What is the right conditional formatting formula for this.
View 3 Replies View RelatedI wish to be able to lock an entire row after an entry has been made in a certain cell.
e.g. let's say i want to lock row 9 in its' entirety following entry of "Yes" in cell G9. If there is no entry in G9 the the entire row should be still unlocked. Likewise with any row with a corresponding entry in column G.
I have put together a spreadsheet to help with the creation of work orders. I have a summary page that the user can define which category the work order falls under along with this I have a couple of macros set up that will print a specific work order pertaining to the category they selected. I have run in to a few problems (mostly training users) that I would like to eliminate up front.
I am looking for a macro that I can use to look at the contents of a cell (contains a word that corresponds directly to the name of one of the sheets in the work book) and print the worksheet that has the same name as the contents in the referenced cell.
I have thousands of items each with a unique barcode(column A) and each is catorgorized either KEEP or DISCARD (column B). What I want to do is scan the barcode (column A), Vlookup and return KEEP or DISCARD (column B). Now based on what the vlookup returns can I have a sound file play for KEEP and a different one for DISCARD.
View 11 Replies View RelatedHow to Lock/Unlock an Excel Cell Based on the Contents of Another Cell?
View 1 Replies View RelatedI'm trying to set up a dependent cell (B) based on what is in the independent cell (A)
If A is blank, B should be blank
If A has any value other than X, B should display a set string Y
If A contains X, B should contain a drop down list with a range of choices.
I've tried setting it up as a dependent validation cell and I've tried using OFFSET, but the best I can do is to get three different drop down lists to populate cell B. One with only string Y, one with only a blank, and one with the range of choices. The problem is in the first two cases above, I want the cell to fill automatically with either blank or string Y -- I don't want them to just be drop down options, with the cell displaying the last value that was input.
I am creating a macro to automate data analysis for work, but I've become stuck.
I need to find the coordinate of the first cell in a column with word "reserved" or "extended" contained in the cell, and then assign the row number of that coordinate as a variable to use for moving data around. Basically, I want something like VLOOKUP, but instead of returning a value, I want it to return the coordinate.
I am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.
I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..
