I have a worksheet with frozen panes (Row and Column). I have hyperlinks that jump to the this worksheet. Is there anyway to have the window position itself so the active cell is in the upper left corner of my frozen panes?
View 9 Replies
I'm trying find a way in VBA to make a particular cell the top left one in the active window.
View 9 Replies View RelatedI was just wondering if its possible to create a Hyperlink to open a location with the link ref in another cell?
For example, If I created a shape (Insert > Shape) then assigned a hyperlink to lets say Sheet 2 cell A1 & in that cell the link to open My Documents?
Sheet 1: Shape (as a button)
Sheet 2: Cell A1 - C:UsersUSERNAMEDocuments
Then when I click the 'button' it doesn't go to Sheet 2 cell A1 it actually opens the documents?
I'm having trouble identifing a way to return a location for the position of the active cell. I've searched Excel help with "Position, location, return, activecell, etc." and I can't seem to figure this out. I know that it's possible, so that's why I'm on here!
...
Ok, say the active cell is currently "F1", and I need the location "F1" to identify the ROW to be used in a formula later, how would I go about that?
The current contents of cell "F1"' will be "REPLACE", but I need to change the words "REPLACE" in "F1" and other cells labeled "REPLACE" in column F to the following formula (where the "1" in "A1" is is the current row):
I'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result.
For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z).
The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
I am trying to use an active cell (i.e. "Sheet2!E7") which always changes, to create a hyperlink on a different sheet to that particular cell. What is happening is I have a master list of current open POs. On a separate sheet I have the PO listed in greater detail. I want the PO number on my master list to have a hyperlink that brings you to my detailed PO on another sheet. Simply, I need a way to turn my active cell into text (not the contents, but the cell itself).
View 2 Replies View RelatedI'm running Excel 2003 and I'm looking for assistance with programmatically creating hyperlinks. I have to update a Shared Workbook on a weekly basis. The cells in column D contain a catalog id and I need to create a hyperlink that includes this id in the url.
What I want to do is insert a new row, enter the catalog id and then create a hyperlink that contains the id. Additionally, the text to display has to be the 8 digit id. Here is an example of the hyperlink.
I am working on macro, I want to have a formula in Sheet2 which pulls hyperlink from an active cell.
to select & and copy I use - Range("J" & ActiveCell.Row).Copy
Its a dynamic selection of cell. Any excel formula or VBA code to pull hyperlink from active cell and paste it to sheet2.
I have a column with entrys of 2 kinds. Some being Hyperlinks and others with normal type data. All cells are locked with password except for cells that will possibly have entrys made in them.
Is there a way to move the active cell to R1C1 after any hyperlink clicked? R1C1 is unlocked.
I've built a macro to run a loop that opens excel files, prints certain sheets and closes them. I have the macro working - to some degree. here is my code (this is excel):
Sub RMPProducer()
OldPath = "S:RMBS_Performance_Analytics Analysis1 Staging Folder For Monthly Model Templates2007200704VVDeals"
Dim t As Workbook
Dim s As String
Dim a As Window
With Application.FileSearch
.NewSearch
.LookIn = OldPath
.SearchSubFolders = False
.Filename = "*.xls"
.MatchTextExactly = True
If .Execute() > 0 Then
For i = 1 To .FoundFiles.Count
s = .FoundFiles(i)
I have 2 problems. First problem is that I am trying to add a function to make the window close once its finished printing. This actually works - but it limits my loop iterations from i = 1 to 2 (so it only runs 2 times and I'm not exactly sure why). If I don't include the statement - this can run for up to 7 - 8 times (these are very large files) then excel runs out of memory. Unfortunately, i can't set the loop to run from i = anything other than one.
So What I would prefer is to be able to make the "ActiveWindow.close" command work - because this way I can run the entire loop. But I'm not sure how to. I tried window referencing, I tried adding a new active Window so when the file opens, its opening in the active window already, but nothing works.
Preferably, I need to be able to reference both windows, as my next macro will involve referencing 2 windows (one static - always open) and the other the loop above.
I'm trying to enter this very simple macro that is supposed to switch from one active window to another. However, I'm getting an error, which I can't quite figure out. Here is the
View 2 Replies View RelatedDim iStartBook As Long, iNewBook As Long
iStartBook = ActiveWindow.Index
ActiveWindow.NewWindow
iNewBook = ActiveWindow.Index
I'm trying to grab the "2" that .NewWindow generates. The above gives 1 both times, despite the obvious 2 in the caption after you run it. So what property works? What does .Index mean here?
I have multiple excel workbooks open at the same time. I need to run a macro on one of them every 15 min but I need to return to the active window when the macro is done. How do I read what window is active then return to it when the macro is done?
Sub AutoSave()
dTime = Now + TimeValue("00:15:00")
Application .OnTime dTime, "AutoSave"
Windows("data.xlsm").Activate
Sheets("Data").Copy
Application.DisplayAlerts = False
ActiveWorkbook. SaveAs Filename:="c:excel" & Format(Time, "hhmmss"), FileFormat:=xlCSV
ActiveWorkbook.Close
Application.DisplayAlerts = True
Windows(1).ActivatePrevious
End Sub
In an open excel file, in the top left-hand corner, the file name is always "Microsoft Excel - Your File Name".
does anyone know how to have the top-left hand corner show "Your File Name" only?
I compared data between excel worksheets all the time, well recently my computer was upgraded from Windows XP to Windows 7 and since then I have not been able to figure out how to have an Excel file to open in the Excel window selected(or last active window) when I have more than one workbook open. Is there a way to do this?
View 5 Replies View RelatedI was just wondering if it possible to create a macro that permanently increases the height of a workbook by a set increment
I have several workbooks that i have the code below assigned to
[Code] ......
So when they open they resize to that set size and position. and what ive been doing if i need to resize (which is often) is just adjust the values in the above code.
Not that the way ive been doing it is difficult but i was thinking how great it would be if i could have a macro i could run that permanently adds 9 to the .Height and subtracts 9 from the .Top
I have a workbook that links to other workbooks, in short people add data in the "other" workbook and the new workbook, we'll call "over see" automatically updates to show this data as it is add. The problem I have at the moment is there are hyperlinks in column H in the "other" workbooks that I need to also automatically transfer/update into the "over see" workbook. When I copy pasted or linked the workbook by having each cell equal the corresponding cell in the "other" workbook(s), the hyperlink lost the first half of its code. When I tried to creat a macro to fix this, code below, it only works for the first hyperlink, all links are different, but with my current macro, they all become the same.
Macro attempt 1: [Code] ....
I have an Excel file to distribute to users. This file must contain Hyperlinks to a Word file which i will enbed in a sheet of the Excel file itself. My question is this: Is it possible to produce Hyperlinks that go to the specific part of the Word document? So far, i am only able to Hyperlink to the first page of the Word doc, by doing a macro.
View 2 Replies View RelatedI have been trying to create a macro in excel to chart a selection of data and to output the chart on the active sheet where the data was taken (as opposed to a named sheet). So basically, I have about 300 worksheets with data, and I would like to have a button on each page that automatically charts that data when clicked, and outputs the chart to the page where the macro was clicked. However, I have not been able to figure out a relative reference that will allow me to make the LocationasObject reference simply the ActiveSheet as opposed to a specifically named sheet. See my code below, which references an output to a worksheet called "Charts". Right now, all of my charts are outputting to the sheet called "Charts", as opposed to the active sheet.
Sub ConsDiscChart()
ActiveCell.Offset(29, 11).Range("A1").Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlDown).Select
ActiveCell.Offset(0, 1).Range("A1:B1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Offset(0, -1).Range("A1:C24").Select
Charts.Add
ActiveChart.ChartType = xlLineMarkers
ActiveChart.Location Where:=xlLocationAsObject, Name:="Charts"
With ActiveChart
.HasTitle = False
.Axes(xlCategory, xlPrimary).HasTitle = False
.Axes(xlValue, xlPrimary).HasTitle = False
End With
End Sub
What is the code to activate a hyperlink in an active IE window, new tab (IE7), as opposed to a new window, which is the result of:
Private Sub CommandButton14_CLICK()
Dim strClick1 As String
Dim strClick1default As String
Set WEBPAGE = CreateObject("InternetExplorer.Application")
strClick1default = Range("c51").Value
strClick1 = InputBox("Paste the weblink for the trace, or accept the default, and press OK to initiate the trace.", "ClickTrace", strClick1default)
Range("c51").Value = strClick1
If vbOK Then
With WEBPAGE
.Visible = True
.navigate strClick1
End With
End If
This code runs the hyperlink activation fine, but opens a new instance of IE, whereas I want it to use the already open and active instance, but using a new tab.
How do you make an active-cells value / text a hyperlink?
View 1 Replies View RelatedI have a Excel database and a userform to look-up reocrds. I want to be able to connect a Data Sheet which is a PDF file to every product in the daatbase.
I have created an additional column and created hypelinks in front of each product. these hyperlinks are connected to the datasheet of that product which is saved on the drive.
I have created a field on the userform to display the respective hyperlink when a record is searched by user.
My problem is that the user form displays the hyperlink name, but its dead.
I want users to be able to click on the hyperlink to view the attached Datasheet. I have tried using Textbox and labels to display this hyperlink,
I have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but it’s not clickable in the email.
Here is the code.
I am outlook 07 and vista 07.
Option Explicit
Const Startingrow = 11 'Data starts on row ##
Const AlarmDelay = 183 'send warning
Sub CheckTimeLeftFac()
'References needed :
'Microsoft Outlook Object Library
Dim i As Long
Dim j As Long
Dim msg As Long
Dim Lastrow As Long
Dim WhoTo As String
Dim SubjectLine As String
Dim MessageBody As String
Dim olMail As Outlook.MailItem
Dim olApp As Outlook.Application
Dim strLink As String
whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
It's for Excel 2003.
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
[Code] .....
Attached File : Copy of Testexample.xlsm‎
I am trying to develop a spreadsheet that will calculate a cost based on a matrix. I am attaching a sample of the calculation created so far. The end result is in cell M13 and is highlighted in yellow. I kind of layed the formula out in a few different cells, so hopefully it would be easy to follow.
simplify this process with maybe another formula that I might not be aware of, or maybe show me how to get this done in VB code. I think VB code would be the correct way to go just not sure.
I am trying to activate a window and the name of the window to be in a cell. lets say: Windows(file2.xls).Active
I want something like this: The name of the file is in B2 cell in tab Sheet1 in file file1.xls so the line will be like:
Windows(.............).Active
i do not know what function to use.
I'm basically creating a file where a userform comes up when you open the workbook, blocks the access to the actual workspace so that no manual entry can be done. What the userform allows you to do is add a new entry to the database (the userform has some text boxes where we type in stuff like location and name or age) after having found the next empty row in the enormous database (3.000 lines)
After having clicked the OK button in the userform and added the data to the database, I would like the userform to have a pop-up message box with specified text like:
"The number assigned to this entry is:" and then I would like to add a variable with excel using the cell in column D of the same row of the new entry. So the end result would be :
The number assigned to this entry is: 01
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
I have a worksheet size roughly 100 * 400 cell. there is roughly 100 cells filled with RED color and with different value.
When i used FIND ALL format - RED, I can locate the cell location and the cell value. And I wish to copy these 2 info onto a new sheet so that on the new sheet, I can create a hyperlink and easily access to the location of the RED cell.
However, in FIND and REPLACE, i have a list of results on what I want. But i cannot copied the information out. So is there anyway to copy it out or to achieve what i want?
For eg.
RED value
cell
50
A3
87
D71
251
AQ5
and so on.
