I am trying to track street pavement for a city and as you can imagine, there is a lot of data entry.
At the end of the day, I will need to know the total length of streets with brick, asphalt, and concrete. Column 'D' has the street material (Asphalt, Brick, Concrete) and Column 'E' will have the length. At the bottom of the sheet, under column 'E', I have cells that will show the total length for streets with Asphalt (E61), Brick (E63), and Concrete(E65), so I need a formula to enter in those cells that will look for the specific pavement materials it is totalling
Also, I am tracking streets with/without curb and gutter. If a street doesn't have it, I need to track how much will be needed. Basically, it will be the length (Column E) times 2 (both sides of the street). In column 'G' there will either be 'Yes' or 'No'. If 'Yes', then I don't need a total and the cell containg the amount of curb and gutter need (Column 'J') will be blank. However, if 'No', Column 'J' will have the total amount of curb and gutter needed ('E??' x 2)
Obviously the sheets will be different lengths so the cells will need to be copied and pasted.
The column header row for a string; if the header contains one of two possible strings then copy the entire column. I've tried the following code but it's not working.
Select Case oColHeader Case InStr(oColHeader, "how much", 1) > 0 Selection.EntireColumn.Copy Case InStr(oColHeader, "level of sat", 1) > 0 Selection.EntireColumn.Copy End Select
If I'm using this function to find the specific text "EXPIRED" in the specified cells, how can I add additional cell ranges on the same sheet to this function?
Below is my initial code that can't get past the first line.
if right(cells(2,i),4) = "D_MA" then ..... ?
I'm trying to clear the contents of all data in each column that has the text conaining "D_MA" in that columns row 2. For instance, if cell F2 has 30D_MA, I want the macro to clear all contents in Column "F" -- but to do this for all columns that contain "D_MA" in row 2.
I am trying to split names across columns. The problem is that some names spilt into 3 columns (first, middle, last), and others split across 5 or 6 (extra names, etc.)
Is there a way to specify split, using SPACE as a delimiter, but only split on the first TWO spaces, then leave the rest alone?
I have a variable list. Each column will be 250 digits and numbers of rows will be variable. I want a macro to import a text file from a specific folder into a sheet without split it to columns. So we will work only in column A
Then macro will find B1002 wording in A1. if it is exist, it will copy the next 36 digits after B1002 wording if not then it will search A2 row. The next step will be to search and find another wording "B1001" if it finds it will replace copied 36 digits text. If it can not find B1001 wording it will go to upper row and search B1001 wording here and paste the text. This will go on till row shows #END. This means it reached the end of the list. And then macro will save this file as text file to another folder.
So macro will go to beginning to open other file in the folder and this will go on till last file in the folder.
This is the logic of the macro. Here is the sample of what I want.
I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
Is there a way to make a macro convert '1' to Yes and '0' to No? I have 2 columns (F and G) in a worksheet that contain the value of 1 or 0, but I need to convert them to Yes or No. I have tried some fo the samples but they pop up a msgbox which is not required.
I'm having a 6000+ records, (contacts DB) exported in Excel 2003 format from MS Outlook.
Except the "First" and "LastName", all other contact elements are in the field "Notes" (which is the BZ column according to the exported outlook layout) multiplied by 6469 (records in total)
Now, I want every time to take the part of the text says "TER:something..." (part of which is date, but not every time with the known format dd-mm-yyyy, as you see here is yyy, followed by something else, with parenthesis here and maybe more data) and copy it in a new cell..., e.g:CO Column, same Row...
Above and every field which by the way is formatted as General (and it is text mainly) are made by merging older excel fields where data laid here and there, that's why you see the commas...with the method of a module with the following code:
Function MyMerge(Rng As Range) For Each Cell In Rng Temp = Temp & Cell.Value & ", " Next Cell Temp = Mid(Temp, 1, Len(Temp) - 2) MyMerge = Temp End Function
Note1:Records with the above string (TER:dd-mm-yyy) are 771 from 6469. Note2: As an alternative solution I can see an extraction of the TER:dd-mm-yyy string and the copy in a new place, like the:CO Column, same Row...
I want to create 3 command buttons (active X) on a worksheet to toggle between showing rows which only contain the below text in column L (range L9:L30) and showing all rows containg the options (However, I also have some blank rows in this range and i always want them to remain hidden.)
My text options are:
High ‚ Medium ’†“™ Low ’á
The text arrives in the cells via a VLOOKUP
Is the chinese text a problem? i can't type it into VB.
I've been using the following macro to hide and unhide rows with a command button in the same sheet:
Private Sub CommandButton1_Click() Toggle_Hide_Unhide End Sub
Sub Toggle_Hide_Unhide() Dim rngCell As Range Dim TakeAction As Boolean
If ActiveSheet.CommandButton1.Caption = "Hide" Then TakeAction = True ActiveSheet.CommandButton1.Caption = "UnHide" Else TakeAction = False ActiveSheet.CommandButton1.Caption = "Hide" End If
For Each rngCell In ActiveSheet.Range("I9:I30") With rngCell If .Value = 2 Then .EntireRow.Hidden = TakeAction End With Next rngCell End Sub
I am trying to pull titles out of a text string but its quite difficult because of how the data was originally inputted. I need titles that appear in the following different formats
" title" title/ title"
These titles were not inputted consistently and it could show up in the middle or at the beginning. I have attached a sample of the data that i am working with and a sample formula that i was trying to use to obtain my information. The formula that i have is a nested formula of find and mid formula that searches for the text within " ".
I have a worksheet with several columns. I need a formula to search column D only and each time a specific location is identified to replace that location with alternate text. Example (ORIGNAL TEXT):
Column Dtext to text help.xlsx BIRD FISH DOG BAT BUG
I need to search that listing and each time the word BIRD is mentioned have it replaced with FEATHERS and each time DOG is listed have it replaced with TAILS Final result would look like:
FEATHERS FISH TAILS BAT BUG
All other text should stay the same and replacement text should appear in the cell of the text it is replacing. This is a sheet used by multiple people several times a day and so the Find/Replace option really won't work.
Have working on this for at least 6 months and it just isn't going to happen for me. I thought I could use a Conditional format, but that is producing no results either.
I have a macro which imports data from a mainframe dump text file and performs 'Text to Columns' on the imported data so that formula in the spreadsheet can act on the data. The code works perfectly well when I use it, but if a different user logs on and performs exactly the same mainframe dump and import macro the Text to Columns action splits the raw data in a different way and the result is that the split renders the formulae useless.
I've experimented a little and for some reason it appears that the 'Field Info' parameters which are produced when the Text to Columns function is recorded in a macro differ between users even though the raw data is exactly the same.
So I have a column that will have the same text in all of the cells contained within it except for one cell. Is there a formula that I can use that will automatically find and transpose the text of the one cell that is unique out of the column? I was thinking of an IF function, but the column could be up to 60 cells in length.
I have a report that in column BX has a large string of text (html information). Within this text there is a phrase called "| Hear = Education Website |" The phrase Education Website can be a variety of things though (Up to 9 choices). What is a formula I could use to just pull out the text after "Hear =" but before |""?
How would I pull only a specific word from a text cell? If you see my example, in one column I have various job titles. If A2 contains "Manager", then in B2 return "Manager. If A1 contains "Coordinator", return "Coordinator. Etc.
Take 5 PPE Swabs per Area, Both Shifts. Test various equipment - hands, aprons, sleeves, hats, etc.
What I need is for "Take 5 PPE Swabs per Area, Both Shifts." to be bold and highlighted in gray, but none of the other text. Conditional formatting highlights the entire cell, which won't work.
I had VBA run a third-party program ("HYD") using data listed in my spreadsheet. HYD produces a textfile and I want to extract a number from that log (line 58, columns 6-10 to be exact).
I started with
Open "C:TempHYDLOG.TXT" For Input As #1
but I don't know how to have it skip down to line 58 or which function to use to extract the number I want. I've read through tons of help files and forums but none of them treat anything as simple as scrolling down to specific lines.
The entire subroutine up to that point is as follows: ....
how to set one entire columns text to two different colors based on another columns values. So for example I have column A and B. Column A has two values called Internal and External. Column B is a title table so the entire column is just titles. We'll say it goes for 20 rows if you need a row count. What I am looking to do change the text in Column B to Red for External and Blue for Internal. I tried the conditional formatting and I just can't seem to find the right option.
I have a workbook that has protected cells however need the ability to specify which columns to allow editing and which not to allow. For example all data in column A can be edited however column B can't. Column C & D can and E can't and so forth.
I have built a capacity planner which is broken down in days.
In row 1 i have tagged the column with a week number indicator i.e. 5 columns (=5 days) are tagged "Week 1", next 5 tagged "week 2", etc.
I am trying to create a weekly view of this and need to sum the values of all cells on row 7 for a particular week i.e. I want to sum Cells R7, S7, T7, U7, V7 which represent the 5 working days in "week 1"
I've create an userform with 2 textbox and a command button.
The user is allow to paste an article into textbox1, when they clicked the button, it should be able to find a specific text string in the article, then right after that text I want to insert addition note and a new article with notes will be generated in textbox2.
Currently i stuck on how to insert the note after the specific text string?
I plucked a macro off an old post from here (as I always do), but I'm having trouble tweaking it.
VB: Sub completedtest()
Dim c As Range Dim rngG As Range For Each c In Intersect(ActiveSheet.UsedRange, Columns("i"))
[Code] ....
As it currently stands, the macro selects the entire row of rows containing the letter Y in column I. All I need to change is, I want to simply select columns B through I, rather than the entire row.
I want a checkbox to filter column with specific value and hide others. And also there are two checkbox, one should be automaticly unchecked if we check another checkbox.
I am looking for a way to select specific columns in excel that have specific characteristics in the header titles. For example, I have a very large worksheet with columns that specify the year and month (ie. "1900-8"). The years range from 1900 to 2011 and each year has "-1" to "-12" to represent the months of the year. Specifically, I am wanting to pick out all of the columns ending in "-8" (August).
