i have a combobox(form control) that has its listfillrange property equal to a range("A1:a10") on sheet1. The combobox allows for user entry and i am trying to create code where it adds the value entered in the combobox to the range("a1:a10) on sheet1 if its not already within the list. Then set the last value used as the listindex of the combobox.
View 2 Replies
how to control the contents of one combobox based on the selection made in another combobox. But, for some reason, ComboBoxTime1 (as shown in the code below) will only display the first item in the Dynamic Named Range when the user clicks on the pull-down arrow. The Named Range is consistent in size (4 cells) for each of the selection options in ComboBoxDay1. why only the first of four options are displayed in the second combobox?
Also, when a selection is made in the first combobox, the second combobox immediately displays the first item in the Dynamic Named Range (the one selection option it allows). I would prefer for it to remain blank until the user has selected an item from the pull-down list.
Private Sub ComboBoxDay1_Change()
Dim strRange As String
If ComboBoxDay1.ListIndex > -1 Then
strRange = ComboBoxDay1
strRange = Replace(strRange, " ", "_")
With ComboBoxTime1
.RowSource = vbNullString
.RowSource = strRange
.ListIndex = 0
End With
Else
LblTime1.Caption = "Time 1:"
End If
End Sub
I am unable to reference the combobox's rowsource to another sheet dynamically
The codes below are initialized when the userform is loaded. Is there anything wrong with it?
Private Sub UserForm_Initialize()
combobox1.RowSource = sheets("testing").Range("L2", Range("L65536").End(xlUp)).Address
End Sub
How can I fill a UserForm ComboBox or ListBox with cells from a dynamic changing range?
View 3 Replies View RelatedI'm trying to add a dynamic named range to a combo box in Userform but getting this error.
Have tried several lines of code this being the last that hasn't worked . . . .
Code:
CustCBx.RowSource = Range("CustList").Value
This is the formula for the named range in sheet
Code:
='Customer Info'!$J$2:INDEX('Customer Info'!$J2:$J200,COUNTA('Customer Info'!$J2:$J200))
My Userform with combobox entries for product checks against the rowsource and if not on the list, is added to the list. the list is a named range in a Table that is used in a data model.
No matter which way I try I am regularly getting a corruption in the table that is home to the named range which is the rowsource... after one or two entries from the userform.
The rowsource is not bound to the worksheet, it is populated at userform_initialize procedure. (There are 4 combobox drawing from same rouwsource hence the loop through to check each)
debug points to the line at which conbobox value is being entered into the rowsource, though not always - it sometimes just crashes the whole file and everything needs restarting, upon which the table is fine and entry is evident.
I have tried resize, addrow to bottom of table variations and all result in the same core problem of a table corruption that crashes the file.
I am working in excel 2003. I have a number of combo boxes, and I would like to get the listindex of a given box. It is easy to get the value of the box number "x"
Controls("Combobox" & x).value
works no problem, however
Controls("combobox" & x).listindex
does not work, and while I can do
Combobox1.listindex
I cannot figure out how to make the 1 a variable.
I've created my menu. It has a new tab, two group, and some controls. My task is to load strings into one of the comboboxes from a list on a sheet. The id of the combobox is cmbo_ReachesCombo. I grabbed some code from Andy Pope's site that changes the text for a editbox. I tried to adapt it to my combobox, but it didn't work.
Public Sub cmbo_ReachesCombo_getText(control As IRibbonControl, ByRef returnedVal)
' Code for getText callback. Ribbon control Reaches Combobox
'
Dim R As Range
Set R = Sheets("Options").Range(Range("ReachPagesHeader").Offset(1, 0), Range("ReachPagesHeader").Offset(20, 0).End(xlUp))
returnedVal = R.text
End Sub
Trying to create a dynamic chart herewith control in combo box.
Chart 2.xlsx
I want to create a cascading combo box from some values that I have, ill explain how I approached it.
Cascading combo box is a combobox which values are obtained depending on the answer of a previous combo box.
So I set up a little table like so:
Categories Car Train Bike
Car Mercades First Honda
Train Ford Western Ducati
Bike Skoda Red Suzuki
and the combo boxes would be set aside from that.I collected the data in Named Ranges (A Range for Categories, A Range for Car, A Range for Train...)
The first data validation box contains = Categories the second data validation box contains =INDIRECT($C$2) (Where C2 was the range of the first validation box)
Once this was working, I decided to change the formula for the named ranges to allow me to add more values.
The formula was: =$F3$F8
I changed it to: =OFFSET($F$3,0,0,COUNTA($F3:$F96),1)
I expected this to work however, it just doesnt.... when clicking on the drop down arrow for the validation box, nothing happens. No box or values or dropdown.
I have created a userform where I have a combo box and an options box. I want the combo box to reference a specific list of values. And if the check box is selected, I want the same combo box to reference a different list of values. This is the present syntax I am using. For some reason, The value of the check box does not alter the list in my macro.
Private Sub Userform_Initialize()
If chkHeader.Value = True Then
cmbSort1.Clear
With cmbSort1
.AddItem Range("A1")
.AddItem Range("B1")
.AddItem Range("C1")
[code].....
I have a golf teetime reservation spreadsheet. For each tee time there can be up to four players names so I use 4 columns. Times are listed in rows every 10 minutes beginning 6am until 5pm for a total of 66 rows per day. I have a member/customer list that I have on a separate sheet that I've named. I am using the ActiveX combo box next to each possible entry (so 4 columns times 66 rows = 264 combo boxes). It's a little slow and takes a long time to open. I like the ActiveX combo box because it allows me to define the box format and display and it allows search/read/write capability. The idea is the customer calls, I ask what time they want and we arrive upon an available time. I ask for a last name, I click the combo box, type the first letter of the first name and then scroll if necessary to the name and click it to add the name to the time/player cell. If no name in my list we simply type it in and I'll capture it next time I refresh my customer list.
way to dynamically define the linkedcell in the properties so that instead of 264 combo boxes, I might have one combo box that I can click on and then direct my selection to the cell I want it to go into.
(Auto)Filter or a listbox somehow functioning like it?
Hi Excel guru's, i've got the following question:
Can I fine-tune the AutoFilter function so it filters more flexible? ....
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
Excel 2007 and very new to VBA...
I have a userform (named "QAReviewForm") with a combobox (named "cboSupName"). I want it to populate with my named range "SupList".
FYI, the SupList is found on sheet 2, "Administrative Menu" in column E. E1 contains the heading "Supervisors", and my named range formula is
Formula:
[Code ] .....
When it runs, my form opens and the combobox is there, but nothing appears as options for me to select (yes, I have some values in column E).
I have two questions.
1). I have dates listed in excel (01/01/2006 to 12/31/2006) say from range B12:B376.
How do I get these values to a ComboBox.
2). If the above is possible and if I select a value in ComboBox say 08/07/2006, it should get updated in a particular cell say A1
So selection of 08/07/2006 in ComboBox, should reflect 08/07/2006 in cell A1.
Note: This ComboBox is on the UserForm and not on the Excel Sheet.
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View RelatedI am trying to get to grips with the dynamic ranges for pivot tables. I have named a range data and in the refers to section put:
=OFFSET(Sheet2!A1,0,0,COUNTA(Sheet2!A:A),COUNTA(Sheet2!1:1))
I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
I have a range of data that will grow as the days of the month pass but I need to run calculations on this range. The data is 13 columns wide but the number of rows will increase daily. I remember using a formula in the Define Range that would automatically take into account new additions using the OFFSET function but cannot for the life of me think how exactly to do it.
View 4 Replies View RelatedLine of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
I have been working on part of the code for my spreadsheet and it works fine in the spreadsheet “Databaseform” however when I copied the code to my master spreadsheet “Paul_PartLocDBCombo” it does not work, I get the error:
Method ‘ range’ of object ‘_worksheet’ failed
The code is then highlighted in yellow, the code is:
Set rng = wksPartsData.Range("a1", Range("a65536").End(xlUp))
Meaning this part is incorrect but I don’t know why? To work it: go to Databaseform and press start. Enter 7mm in the product field and press find all. It will then return all the matching results in the userform. Its this I want to try and achieve on the other spreadsheet when the button find label is pressed.
I need to go to named cells in a workbook based on a selection in a combobox - I just can't seem to work out the coding -
View 4 Replies View Related'i use a combobox in a userform to show data from a hidden sheet its name is sheet5(sheet1).
'i defined the Range as ExpCat and put ==OFFSET(Sheet1!$M$3,0,0, COUNTA(Sheet1!$M3:$M9),1)
'and use this code to view the data, but the code shows the data of the activesheet.
Private Sub ComboBox1_Click()
Me.ComboBox1 = ThisWorkbook.Worksheets(5).Range("ExpCat").Value
'Me.ComboBox1 = ThisWorkbook.Sheet5.Range("ExpCat").Value
End Sub
I have a userform (uf_PaxInput) with a Combobox (cmb_flight_dest) which I am trying to populate from a worksheet range ("Dest") using the following code:
VB:
Sub LoadForm()
With uf_PaxInput.cmb_flight_dest
For Each Item In Range("Dest")
.AddItem
Next Item
End With
uf_PaxInput.Show
End Sub
The code seems to run okay however whent the form loads the combobox drops down to show only blank items to select. These blank items number them same number of items that are in my named range ("Dest").
I want to make simple Combobox with two dropdown lists throwing me back cells values, but I never made that so I've got a little difficulties.
The sample combobox should look like this:
Clipboard01.png
For the left Dropdown list there's defined name of the range "ITEM1", and for the second - range named "ITEM2".
After user will choose something I want to have numbers of the items selected from the lists in cells "A1" and "A2", and run a macro after clicking OK. How can I do this?
All I want to do is
put a combo box on a spreadsheet,
have it populated, and sorted - ideally, alphabetically with range names already created.
And
I'd like to be able to click on the Range Name and GoTo the location.
I have an workbook with two worksheets: sheet1 and sheet2. In first sheet I have an combobox (with data from sheet2, range A2:end xldown). In second sheet I have:
column A: item
column B: item with range
column C: range
I need to select one item from combobox (for example 3) and after that to select a cell (for example D3).
In sheet2, column A, I need item 3 to be deleted.
In sheet2, column B, I need item 3 to be added.
In sheet2, column C, I need the selected cell (D3) to be added and so on for all the items!
First I will explain what this workbook does.
In worksheet "sheet1" I use "change sheet" button to change the backgroud by selecting some pictures, in range S14 I have one number from the name of the background picture (using substiture function).
By selecting one cell (with blue text) + one value from the combobox, in worksheet "sheet2" : -the selected value in column A will be deleted
- the selected value in column B will be added
- in column C I will see the adress of the active cell (cell with blue text)
- in column D I will see the blue text from the active cell
I need in column E to copy the range S14 from "sheet1" when I select a value in the combobox !
The range S14 will have different values!
I had tried this code (in module1 "Sub test") but it's not working how I need it to work:
