Add Macro To Call Subs Depending On Cell Value
May 16, 2014
I am trying to add a macro to the ACCT DATA sheet, which calls one of two subs (AddCarriertoChecklist() - or - ClrPolChList() located in seperate modules). The macro should call them depending on whether "X" is entered in a cell in column "E". The issue lies in that I have macros doing a few things to this sheet already, and I am unable to tie this one in.
I have the two subs (AddCarriertoChecklist() - or - ClrPolChList()) working. I just can't seem to get them called. This small bit is how I was attempting to call them.
[Code] ......
Below is how I currently have it tied in with the rest of the code for this sheet:
[Code] .....
What is it that I am missing?
View 2 Replies
ADVERTISEMENT
Jul 28, 2007
Calling a Sub from another Sub is quite common, how about a Sub that does nothing else but call all the subs to execute the entire job?
Will the subs run sequentially after one completes, or will there be the likley hood they will bump into each other causing all sorts of chaos.
View 9 Replies
View Related
Feb 13, 2013
I have several blocks of data that I have defined under several names to make data processing much easier when writting formulas. They problem that I have right now is that depending on the value of one cell, I need to call up a given defined name block of data to be used on the calculations. These blocks are labeled as DATA400, DATA500, ... user will input information that will allow me to determined what block needs to be used, user will input data like 400, 500, ..., but to be able to call a block of data I need to reference the complete label DATA400. I have tried to concatenate "DATA" to whatever value is input by the user and use the concatenated value to call the specific blocks of information but it doesnt work.
View 8 Replies
View Related
Aug 13, 2014
This is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I also tried this code.
[Code] .....
View 2 Replies
View Related
Jan 7, 2009
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
View 9 Replies
View Related
Feb 9, 2013
I have a macro that is woking that is activated either via Ctrl-p or by an icon in my quick links.
I would like to call the macro when I enter text in the input cell C7.
At the moment I enter text in C7 and then call the macro to perform a series of tasks.
I would like to make the macro and tasks perform when I enter the text in C7 and hit return or enter key.
Is this possible??????
View 3 Replies
View Related
Oct 23, 2007
I'm trying to create a macro that will check that an Swedish corporate identification number (CIN) is correct. Swedish CIN conist of 10 numbers and are always written 123456-7890. The last number is a control digit to see if the CIN is correct. I've managed to get the macro working but I am not able to get it to work automatically. that is I want the macro to start running immediately after you have entered a companys CIN. In my template you are supposed to enter the CIN in cell A1, and I want the macro to check that immedately when you have pressed "enter". I can not get it to work. the macro works when I do it manually, that is Tools>Macro>Macro..>Run. I've read all about it here but I guess I just don't get it
View 5 Replies
View Related
Dec 27, 2012
code to do the following:
If any cell in range T75:KH1000 is selected whose value is "Exit", call the macro named View6.
(There are about 40 non-contiguous cells in this range whose value is "Exit".)
View 2 Replies
View Related
Jul 13, 2009
I have a Sub that calls 8 other subs, can I hide the 8 subs on a users macro list?
I tried making the 8 subs "private subs", and it did hide them, but then my call sub macro didn't work.
Any thoughts?
View 9 Replies
View Related
Aug 6, 2008
I have an add-in that I'm passing around to my users, and though it has 8 or 9 subs, it only has 2 that they need to see. However, I'd rather not relegate all of the code to a single module, as there is quite a bit of it. I'm aware that I could change all the subs to functions, but they would still appear in the UDF list, and this would also be confusing to the individual responsible for the upkeep of these macros (and I'd have to rework the code a little bit).
I'm just asking if there is any direct way to do this, before I go to the trouble of making a lesser workaround. Google seems to think no, but "don't show macros in list" isn't a very solid search.
View 9 Replies
View Related
Sep 27, 2012
I am about to write a small macro to do a iteration calculation. I would like though for the user to select me a cell so that the macro uses the value in that cell to start calculations. Now, what I think would be the problem is how do I code a "time" or notice an action such as clicking in a cell to continue with the macro.
Would it be by inserting a pause in the code of a certain time so that gives the user time to click and wait for the code to start? If so, how would much time is enough? Is there another thing that could restart the code such as "noticing a click in a cell" command in VBA?
View 1 Replies
View Related
Apr 13, 2009
I have the following code pasted into the worksheet module which used to work fine but no longer does. I didn't touch the code, it just stopped working.
Private Sub WorkSheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$A$16"
Select Case Target
Case "Custom Color 1": Call CustomColorInput1
Case "Custom Color 2": Call CustomColorInput1
Case "Custom Color 3": Call CustomColorInput1
Case "Custom Color 4": Call CustomColorInput1
Case Else:
End Select
Case "$A$17"
Select Case Target
Case "Custom Color 1": Call CustomColorInput2
Case "Custom Color 2": Call CustomColorInput2
Case "Custom Color 3": Call CustomColorInput2
Case "Custom Color 4": Call CustomColorInput2
Case Else:
End Select
Case "$A$18"
CustomColorInput 1-6 are the same except they input data into different cells F16-F21.
When I attach any of the CustomColorInput macros to a button it works fine. When I try to call it from the worksheet module, the data input box pops up but the data doesn't get entered into the cell. When I try to step through the CustomColorInput macros using F8, the input box pops up, I enter data and press ok. Then I continue with F8 and the debugger jumps to a custom function that I entered (below), which is not called for and is in no way related to the code.
Function PullAfterLast(rCell As Range, strLast As String)
PullAfterLast = Mid(rCell, InStrRev(rCell, strLast) + 1, 256)
End Function
When I close VBA, the data that I typed into the data input box is in the correct cell.
So basically, I'm getting three different responses from the offending code depending on how I call it up. Can anyone tell me what's going on?
More generally, in this and previous occasions, I've had problems with macros that cease to work for no reason that is apparent to me. What are some things that would cause a macro to stop working, without actually changing the code (other than the obvious, like referring to names or worksheets etc. that don't exist anymore)?
View 9 Replies
View Related
Sep 30, 2009
My question: Is it possible to write a code that calls the macro with the name specified in a particular cell? Right now I have some AutoFilter going on making a list that has numbers 1, 2, 3... I also have alot of macros named Search1, Search2, Search3... So I can make a cell, say A28, that combines "Search" with whatever number is in Column C, row 29:
View 2 Replies
View Related
Jan 30, 2014
[Code] .....
But what I want to do now is to strikethrough to eliminate unwanted data when a particular option is selected from the drop down list. In this case ( If User choose "Mens" for Gender, and NOT "Pants", Then Strike though the Result "NIKE". This works for the template in column E only using this code.
[Code] ...............
I tried to modify this like
[Code] ...............
So that every time x changes, the condition changes, but it seems like I cant do, Range("NIKE_" & x).
Attached File : Test1-2ed.xlsm
View 2 Replies
View Related
Mar 27, 2007
I have 2 columns and 10 rows (A1:B10). In column A are certain text values. How do I write a macro to go through the table and preform an operation in the corresponding cell in column B depending on the value in cell A? for example, if A3 = "Complete", overwrite the formula in B3 with the value (paste value)?
View 2 Replies
View Related
Mar 8, 2013
The purpose of the excel sheet is hour administration. In the first page you fill in which group it is about, what week it is about and the amount of hours to change.
There are several other sheets named after the group that are filled with some kind of agenda.
An example: I want to make a change to the amount of hours group X will be there in week 3. I fill out the 3 columns (Group, Week, Hours) and hit a button. It should now check those 3 columns for data and modify the hours for the correct group. It is not done yet but I'm running into a problem already, the function I use to find the row with the correct weeknumber in the Group sheet returns wrong numbers and I don't know why.
VB:
Private Sub CommandButton2_Click()
Dim Week As Integer
Dim WeekRow As Long
Dim Groep As String
Dim Uur As Integer
[Code] ....
What I am expecting to happen is this: It checks A1, B1 and C1, selects the correct sheet, executes the function FindRowByValue (the week number is in column B) and fills Week Row with the result, then returns to the original sheet, gives a debug message and repeats this 5 times.
The debug message shows that the Week Row is not returning the row with the week number I filled in but instead returns either the week number itself (so if I wanted to find week 5 it returns a 5, while week 5 is in row 28), or a different number that is incorrect.
View 1 Replies
View Related
Sep 24, 2009
I was wondering if it is possible to prevent a macro from running depending on what value is in a specified cell.
I have a huge excel sheet and a commandbutton that runs a bunch of macros in order to generate a report.
I want to force the user to select a specific project before all the macros are run. Just making the report for a specific project only takes a few seconds but if no project is selected then it runs throught the whole database and it takes forever.
I have set up a cell that changes value depending on wether a project is selected or not. I have placed the cell in the -ForMacros- sheet. Now is it possible to write some code into the commandbutton that halts the report generation + displays a warning box telling the user to select a project first?
What values used to determine wether the macro runs or not doesnt matter to me. Whatever is easier for you
I have attached a sample workbook for you to work on.
View 6 Replies
View Related
May 30, 2008
I will have a spreadsheet similar to the image provided. Basically, I need the macro to go row by row down column I. If the cell in column I contains the word "Tech" I need the cells from column B to P to be shaded color1; if it contains "Update," color 2; if the cell is blank; leave the cell as is. Once the macro has done this, it will continue to the next row and to the same check.
The number of rows in the spreadsheet will change on a day-to-day basis depending on the data that's pulled, but the columns should remain the same.
So I think I have the shading part. This is what I have so far. I'm not sure if this is the most efficient way of coding it, but it kinda works. I guess another problem would be if in the future the column with this info (column I) changes and shifts.
View 10 Replies
View Related
Jul 28, 2006
This is the code I have:
Sub Auto_Open()
Sheets("Data").Select
Range("A2:E32").Select
Selection.Copy
Sheets("May").Select
ActiveWindow.SmallScroll Down:=-9
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Sheets("Data").Select
Range("A1").Select
ActiveSheet.Paste
Range("A1").Select
Sheets("Sheet1").Select
Range("A2:E32").Select
Selection.ClearContents
Range("A1").Select
End Sub
1) How do I set this up so that if the cell Z1 reads 1, it will paste the data to the "January" Sheet, if Z1 reads 2, it will paste to "February" Sheet, if Z1 is 3 it will paste to "March"......
View 9 Replies
View Related
Jul 10, 2012
I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code:
Sub RSLDASHBOARDV2()
'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D.
'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D.
'Do Not Modify Code Unless Given Proper Privileges to do so.
Dim APPSPD As Worksheet
With Application
.ScreenUpdating = False
.Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code:
objField2.PivotItems( _
"TRC").Position = 1
objField.PivotItems( _
"MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code:
Sub STATSPIVOT()
'STATS PAGE BASED ON STATS DATA TAB
Sheets("STATS DATA").Select
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("STATS DATA").Select
Range("A1").Select
[code]...
View 4 Replies
View Related
May 21, 2006
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
View 4 Replies
View Related
Apr 29, 2014
I have UDF and would like to use a Macro Button to have it run whenever I need to. Now I have to disable macros with notification in trust center and after entering data, enable content. I have my UDF in a module, is it possible to have another module with a macro so I can run this UDF whenever I need to?
[Code] .....
View 7 Replies
View Related
Feb 7, 2014
I am trying to run different macros by clicking various different buttons on the sheet, I then want different data to load into the user form depending which button was pressed. So I have buttons named "SV_1" and another named "SV_2". when either button is pressed then it runs a common macro that gets the name of the calling item. then I want to add "Macro" to the beginning of the calling item name and then call that macro. here is the code that I am working with, when using a watch i can see the value of the variable is "MacroSV_1" when button 1 is pressed but I cannot get it to run the Sub.
VB:
Public ClkBtn As String
Public CallMacro As String
Sub ItemCall()
[Code] ......
View 5 Replies
View Related
Jun 25, 2014
I am trying to write a sub that executes a sub in an xla add-in. How can that be done in general?
More specifically I am wondering whether it can be done with the limited info that I have about the add-in and the to be executed macro within the add-in.
assume the name of the xla add-in is test.xla. The add-in is locked. I therefore do not know the name of the sub to be executed nor do I know the "on action" name of the sub in the ribbon. All I have is the Ribbon button label. Assume the ribbon button label is "ButtonLabel".
Is it possible to call the macro just by knowing the ribbon button label? If yes, how does the script look like assuming the above xla and button name?
View 5 Replies
View Related
Nov 14, 2008
I've created a simple UserForm, and with some great help from royUK. I've managed to get it working to suite my needs. The next thing I need to do is call it when the user runs the macro.
How do I call the UserForm from within the macro that I created?
Once the user gives the input, how do I take the values and pass them to the loop in the macro?
View 11 Replies
View Related
Sep 11, 2009
I have a macro call psc in one module
in a different module I would like to "call psc"
however, this does not work
View 9 Replies
View Related
Oct 8, 2009
I have created a custom menu and saved it as an .xla, one of the functions on the menu is to open up a workbook from a file path. The second option on the menu is to run a macro from the custom menu that is saved in this opened workbook.
Is it possible to write a code that will go off and find this macro from this open workbook?
The reason I wanted to do this is so the user has two options to enter data from however I didn't want to copy the macro over from the original workbook as in time the workbook will be updated
View 10 Replies
View Related
Mar 13, 2012
I have a named range, which pulls a text value from a vlookup. This text is the name of a vba sub I have written. What I would like to do, is call the macro based on this value. This is what I have so far but I can't get it to run.
Code:
Sub ControlSheets()
ActiveSheet.Calculate
Hideallsheets
Dim MacroSub As String
MacroSub = sheets("Control").Range("SheetMacro").Value
Call MacroSub 'this is the name taken above that i want to call
End Sub
View 2 Replies
View Related
Jul 6, 2009
Any way to actually execute a macro stored as a text file?
Without being long winded - I want to create different macro and physically save them as text files. Once saved - I could call them from a list.
View 9 Replies
View Related
Jun 20, 2006
can i use a hyperlink to call/invoke a macro...?
View 5 Replies
View Related
