Cell Shading Macro Depending On Text

May 30, 2008

I will have a spreadsheet similar to the image provided. Basically, I need the macro to go row by row down column I. If the cell in column I contains the word "Tech" I need the cells from column B to P to be shaded color1; if it contains "Update," color 2; if the cell is blank; leave the cell as is. Once the macro has done this, it will continue to the next row and to the same check.

The number of rows in the spreadsheet will change on a day-to-day basis depending on the data that's pulled, but the columns should remain the same.

So I think I have the shading part. This is what I have so far. I'm not sure if this is the most efficient way of coding it, but it kinda works. I guess another problem would be if in the future the column with this info (column I) changes and shifts.

View 10 Replies


ADVERTISEMENT

Return Text Depending On Another Cell

Jan 8, 2007

I have a very long excel sheet. What I want to do is, depending on the input in one column (text), return a another text in another column, for the whole sheet.

I tried to with Select Case Statement and if-then, but couldn't figure it out since I don't have much VBA experience.

View 6 Replies View Related

Enter Text Depending On Another Cell

Apr 8, 2007

I have a spreadsheet which is attached. I want text to be entered into column A only if there is text in column B. The text to be entered is taken from a cell in another workbook. I have removed the lin to up it to this fourm.

View 5 Replies View Related

Return Value Depending On Text In Cell

Mar 1, 2008

I have a cell A5 in a worksheet that can be either E or W. I am looking for a formula in Cell A10 in the same worksheet to return numeric values of either +1 if cell A5 is W or -1 if cell A5 is E

View 3 Replies View Related

Highlighting Cell Color Depending On Text

Sep 15, 2014

See attached work book, it is an mot booking system that is all working fine except for one thing that I don't know how to change.

At the moment if you double click a cell in the test type column it enters the required data and turns the cell green highlighting the length of time and values this is all good but I am wanting the ones that start with n-side to turn yellow just so that we can see our own internal tests easily. It is control in the coding not formatting . Is there a way this can be done?

View 2 Replies View Related

Use Same VBA Macro Depending On Cell Name

Jan 30, 2014

[Code] .....

But what I want to do now is to strikethrough to eliminate unwanted data when a particular option is selected from the drop down list. In this case ( If User choose "Mens" for Gender, and NOT "Pants", Then Strike though the Result "NIKE". This works for the template in column E only using this code.

[Code] ...............

I tried to modify this like

[Code] ...............

So that every time x changes, the condition changes, but it seems like I cant do, Range("NIKE_" & x).

Attached File : Test1-2ed.xlsm

View 2 Replies View Related

Conditional Formatting - Highlight Color Of Text In Particular Cell Depending On Value

Dec 22, 2013

I would like to know the formula to highlight the color of text in particular cell if the value of the particular cell ( value is text ) is so and so.

For Ex: If the J6 is "Vacation" then the J1 text should be in red color.

View 5 Replies View Related

Remove Certain Text From Cell Depending On Another Cell?

Nov 28, 2012

I have a cell in a column A1 where is written: "XYZ 492" and in another Column is written "492".

Now I want to remove the "492" out of the first cell with a furmular.

View 4 Replies View Related

Loop: Macro To Go Through The Table And Preform An Operation In The Corresponding Cell In Column B Depending On The Value In Cell A

Mar 27, 2007

I have 2 columns and 10 rows (A1:B10). In column A are certain text values. How do I write a macro to go through the table and preform an operation in the corresponding cell in column B depending on the value in cell A? for example, if A3 = "Complete", overwrite the formula in B3 with the value (paste value)?

View 2 Replies View Related

Macro - Selecting Row Depending On Cell Value

Mar 8, 2013

The purpose of the excel sheet is hour administration. In the first page you fill in which group it is about, what week it is about and the amount of hours to change.

There are several other sheets named after the group that are filled with some kind of agenda.

An example: I want to make a change to the amount of hours group X will be there in week 3. I fill out the 3 columns (Group, Week, Hours) and hit a button. It should now check those 3 columns for data and modify the hours for the correct group. It is not done yet but I'm running into a problem already, the function I use to find the row with the correct weeknumber in the Group sheet returns wrong numbers and I don't know why.

VB:
Private Sub CommandButton2_Click()

Dim Week As Integer
Dim WeekRow As Long
Dim Groep As String
Dim Uur As Integer

[Code] ....

What I am expecting to happen is this: It checks A1, B1 and C1, selects the correct sheet, executes the function FindRowByValue (the week number is in column B) and fills Week Row with the result, then returns to the original sheet, gives a debug message and repeats this 5 times.

The debug message shows that the Week Row is not returning the row with the week number I filled in but instead returns either the week number itself (so if I wanted to find week 5 it returns a 5, while week 5 is in row 28), or a different number that is incorrect.

View 1 Replies View Related

Macro Disabled Depending On Cell Value

Sep 24, 2009

I was wondering if it is possible to prevent a macro from running depending on what value is in a specified cell.

I have a huge excel sheet and a commandbutton that runs a bunch of macros in order to generate a report.

I want to force the user to select a specific project before all the macros are run. Just making the report for a specific project only takes a few seconds but if no project is selected then it runs throught the whole database and it takes forever.

I have set up a cell that changes value depending on wether a project is selected or not. I have placed the cell in the -ForMacros- sheet. Now is it possible to write some code into the commandbutton that halts the report generation + displays a warning box telling the user to select a project first?

What values used to determine wether the macro runs or not doesnt matter to me. Whatever is easier for you

I have attached a sample workbook for you to work on.

View 6 Replies View Related

Cell Shading By Day

Jan 2, 2007

I have two columns. Date and Day

E.g.
Date Jan 1, 2007 and it falls on on a Monday in the Day column.
Date Apr 6, 2007 and it falls on on a Friday.
Date Dec 25, 2007 and it falls on on a Tuesday.

What I want is to Colour Code the DAY column in case it is a holiday falling on a Monday or a Friday.

View 9 Replies View Related

Shading One Cell On Value Of Another

Nov 7, 2007

I wish to fill cells with black colour for service days staff are not selectable.
The column Entitlement is a formula working on the year start date compares to to the employee start date to work out the days entitled.
What vba or formula(unlikely) do I need to achieve this?
******** ******************** ************************************************************************>Microsoft Excel - Holiday Allowances 2007.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutH5H6H7H8H9H10=
ABCDEFGHIJKLMN1*Year*Start01/04/2007**********2OfficeNameNo.Start
DateWorking*Week*Entitlement12345*3****DaysHours********4**************56000Coley*B.27429-Dec-0117*2******66000Cox*D.A.2324-Jul-73537.5*5******76000Elsom*Lucy23304-Aug-0300*1******86000Graham*A.3919-Feb-65537.5*5******96000Graham*G.W.4001-Jan-8217*5******106000Hallam*K.A.15502-Dec-85649*5******Sheet2*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

View 9 Replies View Related

Add Macro To Call Subs Depending On Cell Value

May 16, 2014

I am trying to add a macro to the ACCT DATA sheet, which calls one of two subs (AddCarriertoChecklist() - or - ClrPolChList() located in seperate modules). The macro should call them depending on whether "X" is entered in a cell in column "E". The issue lies in that I have macros doing a few things to this sheet already, and I am unable to tie this one in.

I have the two subs (AddCarriertoChecklist() - or - ClrPolChList()) working. I just can't seem to get them called. This small bit is how I was attempting to call them.

[Code] ......

Below is how I currently have it tied in with the rest of the code for this sheet:

[Code] .....

What is it that I am missing?

View 2 Replies View Related

Cell Shading And Watermark

Jun 21, 2009

At the moment i have print black and white so the cell shading does not print.

I also want to print a watermark but by having print black and white on the watermark is coming out white so you cant see it.

Is this possible so i can have cell shading on, but not print the cell shading and have a watermark that does print.

The watermark needs to be text not an image.

View 7 Replies View Related

Cell Shading Code

Jan 17, 2008

It's been about a year since i've used VBA and i need a quick piece of code that will Fill/Shade any cell in my worksheet Red (#FF0000) only IF the date is equal to Today or less...(I need to highlight expired cells)...

Im in Australia, and i know there's an issue between the Aus v US date in Excel...i believe there's a piece of code that can rectify this...

View 14 Replies View Related

Macro To Copy To Specific Sheet Depending On Cell Value

Jul 28, 2006

This is the code I have:

Sub Auto_Open()
Sheets("Data").Select
Range("A2:E32").Select
Selection.Copy
Sheets("May").Select
ActiveWindow.SmallScroll Down:=-9
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Sheets("Data").Select
Range("A1").Select
ActiveSheet.Paste
Range("A1").Select
Sheets("Sheet1").Select
Range("A2:E32").Select
Selection.ClearContents
Range("A1").Select
End Sub

1) How do I set this up so that if the cell Z1 reads 1, it will paste the data to the "January" Sheet, if Z1 reads 2, it will paste to "February" Sheet, if Z1 is 3 it will paste to "March"......

View 9 Replies View Related

Cell Shading With Incrementing Values

Jul 13, 2009

can i make a cell dark green if it is value 1 and very light green if its 10 and all varying shades of green in a linear fashion in between?

View 9 Replies View Related

Changing Font Color With Cell Shading Vba

Jun 14, 2007

"I want to make a spread sheet where the "shading" changes based on the text entered into the cell. ie I want to be able to enter yellow into a cell and have the cell shading change to yellow."

THis was accomplished with the following ....

View 6 Replies View Related

Shading Cell Based On Ranges Of Numeric Data

Jul 10, 2014

How do you shade a cell based on multiple ranges of data? e.g. A value of...

1 shades red
2-3 shades orange
4-5 shades yellow
6 shades green

View 4 Replies View Related

Shading And Locking Multiple Cells From Input Based On Value In Separate Single Cell

Sep 23, 2013

Now the problem, Each client has a sheet in a workbook. In each sheet, I input the number of days of service available to that particular client in a single cell. We'll say cell [G8] is the cell used for this input in all sheets. If the client has 30 days of service available then we type [30] in cell [G8]. Each sheet is a 100 day template. I want to shade in dark grey and lock from input the days NOT available to the client based on the days of service input in cell [G8]. If 30 days of service are available in cell [G8] then the remaining 70 days on the 100 day template would be shaded dark grey and locked from input. That is, day 31 through day 100 of the template would be locked and shaded. Each individual day has multiple cells in a column. I want to lock and shade each column of cells in each day not available.

View 5 Replies View Related

Display R, A Or G Depending On Text In 2 Other Cells

Apr 15, 2009

I am trying to nest a formula with IF & AND to work out a RAG status. I have 2 questions per row (in Columns I:J) which will be answered either Yes or No. For each combination I need to give a RAG status in Column K e.g. two Yes replies give Green, 2 No replies give no and one No out of 2 will give Amber

Below is hoped for response in Column K:

ColI---Col--- JCol K
Q1----Q2----RAG
Yes---Yes---G
Yes---No----A
No----Yes---A
No----No----R

View 3 Replies View Related

Add Or Subtract Depending On Text Value In Another Column

May 3, 2007

I have a workbook to record the attendance of students. Sheet attendance9 for September's attendance. Enter 1 for present, 0 for absent, L for late, E for early leave and blank cell for no schoolday. Sheet "remark9" is used to record detail of attendance for September. In sheet "attendance9", I want to display in cell AT2 the number of times a student absent for 7 or 14 consecutive days. How to count from E2:AH2?

View 6 Replies View Related

Set Font Size Depending On Length Of Text

Sep 3, 2007

When a number is entered in cell S3, it triggers formulas throughout the worksheet to populate the it with information from another sheet. If the length of the text in B6 is greater than 80, the font size for B6 only should be 8; if the length of the text in B6 is less than or equal to 80, the font size for B6 should be 10. Regardless of the length of the text in B6, the font size for the rest of the sheet should not be changed.

I tried the following
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address "$B$6" And Target.Count > 1 Then Exit Sub
Dim cnt As Long
cnt = Len(Cells(6, 2).Value)
If cnt > 80 Then Cells(6, 2).Font.Size = 8
ElseIf cnt < 80 Then
Cells(6, 2).Font.Size = 10
End If
End Sub

View 9 Replies View Related

Macro To Automatically Convert PrtScr Image Based Text To Real Text In Cell

Mar 22, 2014

Programming Excel VBA Macro to do OCR (text recognition) from a prt scr screen capture image and input the text into cells. Currently my Excel file has a push-button, and upon clicking on it the macro pastes into Excel the current clipboard image I have created by pressing prt scr while in another program. The macro then crops the image to the region with the applicable text. I have to then manually type the text I see in image format into the appropriate cells.

the VBA coding to automate this? I'd like it to use the clipboard image and run it through OneNote OCR, after which the applicable text values are automatically entered into the cells. Ideally the code will first crop to the region with the desired text before it does OCR. If this is not feasible, it will need to incorporate a method (keyword search?) to hone in on the desired text after the entire prt scr image has been OCRed.

View 8 Replies View Related

Text Colour Change Depending On Outcome Of Formula

Jul 6, 2009

i am looking for a formula, if i put it as plainly as i can then i hope someone can work it out for me!

if ad4 is greater or less than 30 then ad4 text is red, if ad4 is equal too 30 then text is green

View 14 Replies View Related

Macro To Read Just The Text In A Cell Containing Text And Numbers

Apr 10, 2014

I need to get a code that will just read the text in a cell that contains text and numbers example abc123 I want it to only read the abc as the numbers can change and cant write them all into my macro all the time.

View 9 Replies View Related

Displaying Some Cells Data Depending On Selected Text From Other Sheet

Dec 31, 2013

I have an excel sheet which looks similar to below and with some more columns.

HTML Code: 

AreaBranchEmpolyeesProductsShelfs
Area1Area1 Branch110Product 110
Area1Area1 Branch25Product 16
Area1Area1 Branch38Product 28

[Code] ......

I want to have data in other sheet With respect to Product details. Where It gives me the count of Product 1 and so on.

I am able to get the count using countif function and it displays like below.

HTML Code: 

Product Count
Product 16
Product 28
Product 34
Product 49
Product 510
Product 68
Product 78
Product 89
Product 97
Product 108

What I want is when I select "Product 1" It should display some selected columns data from sheet where complete data is available.

HTML Code: 

Branch Empolyees Other
Area1 Branch1 10 abc
Area1 Branch2 5 xyz
Area1 Branch5 7 pqr
Area2 Branch5 5 wxy

Which function we can use. I tried Vlookup but was not successfull.

View 14 Replies View Related

VBA To Change Background Colour In Free Form Depending On Text In Cells?

Apr 3, 2014

I have a spreadsheet with several freeforms. I would like them to change backgroundcolour, if the content in a cell is equal to another cell.

Basically I would like my shape "Freeform1" to change backgroundcolour to RGB (0, 180, 0) if Sheet1.Range ("A1") = Sheet2.Range("D3").

If it's not the same content in both cells, I would like the freeform to remain unchanged, that's RGB (79, 129, 189).

This should happend automaticly, so I don't have to click the shape to make it happen.

View 5 Replies View Related

Insert Formula Depending On Cells Depending Of Variables?

Jan 27, 2014

In a macro I want to automatically insert a formula in several cells. The formula depends on other cells, and I want to be able to manipulate these cells with variables. Here is my code:

[Code] .....

All my variables are declared:

Sheets("DATOS YTD 2014").Cells(I, Semana + 1) is the cell I want to be able to chose due to the variables
Sheets("DATOS YTD 2014").Cells(I, 3) is the reference cell for the VLOOKUP formula, that will vary with I
SheetMonth.Range("B3:W172") is a range in the sheet SheetMonth which is fixed

The error message I receive is the following: "Run-time error 13, Type mismatch"

I precise that the next step is to make the ",6," part in the vlookup formula also variable... but I guess once my current issue is solved this one will be a piece of cake.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved