code to do the following:
If any cell in range T75:KH1000 is selected whose value is "Exit", call the macro named View6.
(There are about 40 non-contiguous cells in this range whose value is "Exit".)
I have the following code pasted into the worksheet module which used to work fine but no longer does. I didn't touch the code, it just stopped working.
Private Sub WorkSheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$A$16"
Select Case Target
Case "Custom Color 1": Call CustomColorInput1
Case "Custom Color 2": Call CustomColorInput1
Case "Custom Color 3": Call CustomColorInput1
Case "Custom Color 4": Call CustomColorInput1
Case Else:
End Select
Case "$A$17"
Select Case Target
Case "Custom Color 1": Call CustomColorInput2
Case "Custom Color 2": Call CustomColorInput2
Case "Custom Color 3": Call CustomColorInput2
Case "Custom Color 4": Call CustomColorInput2
Case Else:
End Select
Case "$A$18"
CustomColorInput 1-6 are the same except they input data into different cells F16-F21.
When I attach any of the CustomColorInput macros to a button it works fine. When I try to call it from the worksheet module, the data input box pops up but the data doesn't get entered into the cell. When I try to step through the CustomColorInput macros using F8, the input box pops up, I enter data and press ok. Then I continue with F8 and the debugger jumps to a custom function that I entered (below), which is not called for and is in no way related to the code.
Function PullAfterLast(rCell As Range, strLast As String)
PullAfterLast = Mid(rCell, InStrRev(rCell, strLast) + 1, 256)
End Function
When I close VBA, the data that I typed into the data input box is in the correct cell.
So basically, I'm getting three different responses from the offending code depending on how I call it up. Can anyone tell me what's going on?
More generally, in this and previous occasions, I've had problems with macros that cease to work for no reason that is apparent to me. What are some things that would cause a macro to stop working, without actually changing the code (other than the obvious, like referring to names or worksheets etc. that don't exist anymore)?
I have some Worksheet_SelectionChange code that automatically calls a Userform when a cell is selected.
What I want to do is retrieve the data from the cell where the Userform is called from and enter it into a textbox on the Userform.
There are 3 other columns to the right of the cell that is selected.
If there is data populated there, I want this to be copied to the appropriate textboxes on the Userform too.
I am trying to create a macro that runs only if the user has selected a cell in column "D". I want it to fill in the background color of the selected cell and then make the value of column "M", row "whatever row the selection is on" = 1.
How to change the background color, but am unsure how to accomplish the other two tasks.
Code:
Sub Macro1()
With Selection.Interior
.ThemeColor = xlThemeColorAccent3
End WithEnd Sub
I have a macro to sort a very large list of materials by a variety of conditions.
The macro runs automatically when a cell on the master list spread sheet is selected and using If/ElseIf it sorts based on what cell they have selected.
Example
If ActiveCell = "ALUMINIZED" Then
ActiveSheet.Range("$A$14:$K$1945").AutoFilter Field:=2
ActiveSheet.Range("$A$14:$K$1945").AutoFilter Field:=4
ActiveSheet.Range("$A$14:$K$1945").AutoFilter Field:=1, Criteria1:= _"Aluminized"
Which is working perfectly. The problem I am having is that some of the cells are two lines so it looks like this:
BE
BEARINGS
I don't know how to get it to launch based on that cell content because of the line break in there. Can I make it launch based on the first two characters only?
I have a checkbox and a command button on my sheet. I want that, depending if the checkbox is marked or not, I can call two different macros. I don't know if this is possible at all or maybe can be done easier otheriwise, but this would more or less be my idea of what should happen:
Private Sub CommandButton1_Click ()
' If CheckBox1 = marked
Call MacroA
'Else (CheckBox1 = unmarked)
Call MacroB
' End If
End Sub
create a macro that will insert a certain number of blank rows to my spread sheet. The number of rows is determined by the #of tasks calculated for that day and is in column B. For example if in column A the date is 01-07-14 and in column B it has 7, I would like 7 rows inserted with the date in column A to remain the same in all 7 rows. Ideally I would like to use this macro for every row, so if the next row down has 02-07-14 and 6, I would like it to add 6 new rows with the same date.
I have attached a copy of the spread sheet for reference.
I have two combo boxes that both contain 7-12 separate search criteria for the user to choose from. The other includes months and the other value ranges in text form. Based on the selections, e.g. "August" from other and "increased by more than 5 %" from other, I'd like to have a command button to execute the appropriate macro. I've already compiled the macros for each occasion but I just can't figure out how to get the button to execute them. Can I use the Select Case statements? If so, how?
Oh, and whether it's relevant or not, the boxes and the button are from the control toolbar.
This is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I also tried this code.
[Code] .....
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
I have a macro that is woking that is activated either via Ctrl-p or by an icon in my quick links.
I would like to call the macro when I enter text in the input cell C7.
At the moment I enter text in C7 and then call the macro to perform a series of tasks.
I would like to make the macro and tasks perform when I enter the text in C7 and hit return or enter key.
Is this possible??????
I'm trying to create a macro that will check that an Swedish corporate identification number (CIN) is correct. Swedish CIN conist of 10 numbers and are always written 123456-7890. The last number is a control digit to see if the CIN is correct. I've managed to get the macro working but I am not able to get it to work automatically. that is I want the macro to start running immediately after you have entered a companys CIN. In my template you are supposed to enter the CIN in cell A1, and I want the macro to check that immedately when you have pressed "enter". I can not get it to work. the macro works when I do it manually, that is Tools>Macro>Macro..>Run. I've read all about it here but I guess I just don't get it
View 5 Replies View RelatedI am trying to add a macro to the ACCT DATA sheet, which calls one of two subs (AddCarriertoChecklist() - or - ClrPolChList() located in seperate modules). The macro should call them depending on whether "X" is entered in a cell in column "E". The issue lies in that I have macros doing a few things to this sheet already, and I am unable to tie this one in.
I have the two subs (AddCarriertoChecklist() - or - ClrPolChList()) working. I just can't seem to get them called. This small bit is how I was attempting to call them.
[Code] ......
Below is how I currently have it tied in with the rest of the code for this sheet:
[Code] .....
What is it that I am missing?
I am about to write a small macro to do a iteration calculation. I would like though for the user to select me a cell so that the macro uses the value in that cell to start calculations. Now, what I think would be the problem is how do I code a "time" or notice an action such as clicking in a cell to continue with the macro.
Would it be by inserting a pause in the code of a certain time so that gives the user time to click and wait for the code to start? If so, how would much time is enough? Is there another thing that could restart the code such as "noticing a click in a cell" command in VBA?
My question: Is it possible to write a code that calls the macro with the name specified in a particular cell? Right now I have some AutoFilter going on making a list that has numbers 1, 2, 3... I also have alot of macros named Search1, Search2, Search3... So I can make a cell, say A28, that combines "Search" with whatever number is in Column C, row 29:
View 2 Replies View RelatedI am trying to accomplish is to display a dropdown or combobox with a list of choices. I want the backcolor to be shaded light green to match instructional text that appears in the cell above. That I have working with the selections appearing. Once a choice is made I want a separate procedure to run that will somehow know which choice was made.
I can't put the code within the module for this particular sheet as it is dynamically recreated each time the data is refreshed and the code will disappear. This may seem to be an odd practice but this is how 25+ workbooks are coded within this system for my employer's customer and it is a required practice.
Is it possible to select a cell on any given row and the value of a cell on that row for example C5 & C6 are shown in cells A1 and B1 respectively? So if the user moved down the sheet selecting different rows the data would change?
View 4 Replies View RelatedMacros question - The user enters a word, e.g. Malaysia in a particular cell (always the same location) and I want the macro to be able to find the next cell with that word in it, but it appears that when using macros you can't paste anything into the find function, so was just wondering what to do!
View 1 Replies View RelatedI have attached a sample file.
There are two sheets Stock and BrancnID The stock sheet has a very huge date ( approx 30000 ). The Stock Id of all the records are unique. Every day I get the Stock ID numbers only in excel format from different branches. Every day I have to match the ID numbers received and delete its data in the Stock sheet ( to get an idea I have shown this in sheet3 ).
Is there is any code where I copy paste the ID numbers from the varoius excel sheets into my excel file in the BranchID sheet and the data gets deleted. i.e as I paste the data the record gets deleted but not the Stock ID number. Also the next day when I get new ID numbers and I delete the old ID numbers from the BranchID sheet the data should not re-appear in the Stock sheet.
I just want to run a macro when a certain cell is selected.
upon investigation, i have found that I can right click on the sheet tab and
view the code. I can then add the following
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Address = "$a$1" Then
run(macro1)
end if
End Sub
I've seen plenty of code for running a macro when various events occur, but how do I run a macro when a cell is simply selected? I have a calendar Macro, and there are two cells that need date input. I want the user to select the cell, and the calendar to pop up. Macro for the calendar works correctly, just need the code for the activation upon cell selection.
View 9 Replies View Relatedi am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies View RelatedI am trying to create a button that when clicked it will add a character to the existing cell. Eg if cell had LDs and I click button I like it show LDs₂
The ₂ is character code 2082.
Currently working on a project for university and still learning how to use macro.
Got a problem which im sure is an easy solution for all you experts out there. As shown in the picture; http://img300.imageshack.us/img300/1205/macrohelp.jpg. When the Sap number is entered (from A19 and onwards), it copies the value to cell B10. The general code is used below.
have two worksheets, "Entry form" and "Database" in my workbook. I am trying to put together a macro button to find the cell value D5(Entry form) in the column A:A (database), if found, copy selected cells (B5:D5,B7,B9) from entry form and paste in the adjacent cells of the row with the value in the database sheet.
VB:
'Match value D3 and replace data
Dim sht As Worksheet, outsht As Worksheet, r As Long
Dim rfoundCell As Range
[Code].....
I have a workbook that has three worksheets. The ASU Database sheet contains part numbers and descriptions including specific details that are selected from pull down data validation lists that are named on the third worksheet. I want to have a front end on the first worksheet that has similar data validation lists for the user to select from to create a search criteria that will create a worksheet with only the rows that meet this criteria. I am not sure what method to use to accomplish this.
View 2 Replies View RelatedI use few cells with formula and I would need when I click on the cell to run a macro that would copy the selected cell and do a paste value.
View 2 Replies View RelatedI created a very simple macro, which actually works.
There is a button on my spreadsheet, so the user can launch the macro using this button.
[ Code] .......
At the moment the user clicks on the button, the part of the macro which is hiding the rows will not take place if the cell activated at the moment of launching the macro is in the range below :
The table on my Excel sheet covers range A5:E49
If the active cell is anywhere in A6:49 or C5:D24 or C25, the hiding part of the macro will not work. Launched from any other cells on the spreadsheet it works fine.
The rest works fine and I am not getting an error.
To solve this I just need to add the line Range("G9").Select and it will work.
But I would like to understand why it does not work from the cells given above. My sheet is not protected and I unlocked the cells just ion case.
I have a macro that will go through a set of numbers and check them against a condition. if the cell complies with the condition i want to copy the entire row to a new sheet. sofar I have tried the following to select the current row but to no avail.
View 4 Replies View RelatedI'm using a CALL Macro to split up a HUGE macro into different pieces:
Code:
Sub RSLDASHBOARDV2()
'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D.
'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D.
'Do Not Modify Code Unless Given Proper Privileges to do so.
Dim APPSPD As Worksheet
With Application
.ScreenUpdating = False
.Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code:
objField2.PivotItems( _
"TRC").Position = 1
objField.PivotItems( _
"MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code:
Sub STATSPIVOT()
'STATS PAGE BASED ON STATS DATA TAB
Sheets("STATS DATA").Select
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("STATS DATA").Select
Range("A1").Select
[code]...