I have a list of 130 names in column A. I have a number value between 0-10 in column B (next to the name). I need to insert the number of rows defined by the value in column B, below each row that I already have (if the value is 0, then the row needs to be deleted). The inserted rows have to be filled with the name value from the row above.
For example - before macro:
Joe Bloggs 2 Adam Wilson 10 Peter Andrews 0 Claire Burrows 6
After macro:
Joe Bloggs Joe Bloggs Adam Wilson Adam Wilson Adam Wilson Adam Wilson....................................
I know how to use data validation to prevent repeat values entered into a column on one worksheet using data validation. I don't understand how to do this across 12 worksheets (months of the year) in a file.
To be more clear: When I enter an ID in a column cell, I want that to be compared to all the other ID's in all the past worksheets and rejected if it has already been entered
All are column D The values entered are identification numbers and have both letters and numbers.
I need to repeat the following rows and formula with column a starting at 9150 and going through 15,000 in 50 point increments. Need formula I can copy and paste easly. see the attached example.
I have a table which contains a list of branches eg;
01 02 04 06
I then have a spreadsheet which contains a number of columns and rows.
I want to create a new spreadsheet in the first column it will contain the branch from the table above then the rows and columns in the above spreadsheet
The rows and columns would then repeat for each of the other branches in the table. IE if I have 4 branches in my table and 100 rows in my spreadsheet my new spreadsheet would contain 400 rows
I have 3 columns and 200 rows. The first column is for Name of product. 2nd column for number and 3rd for $value of number of products. Have 200 rows. Have done a sort and checked. 2 sets of rows are for the same product name. I want to know if it is possible to add up values in 2nd and 3rd column, 2 rows at a time , then 4th and 5th column and so forth, by some formula rather than doing it manually?
Is it possible to repeat rows on top of every page but one? Specifically, I have a seven page spreadsheet and I don't want the rows to repeat on the seventh page.
I have a spreadsheet that contains traffic count data for a two lane road. The data is by direction, by hour, 24 hours a day, 365 days a year so the data is basically 2X 365 = 730 rows of data.
I need to simply add the two directions together for each hour of each day, basically add two rows together, drop down to the next two rows and add them together, repeat.
I need the result as stand alone data on another spreadsheet so the Data, Subtotals operation provided by Excel won’t work for me but something similar that puts the data on another spreadsheet would work.
I also tried to use a formula in the new spreadsheet that added two cells in two rows on the original spreadsheet together and then repeated that process a few times and then tried to drag the formula down but couldn’t get it to repeat correctly.
I have a list of rows with Yes and No check boxes. Columns "T" and "U" contain the output of these checkboxes (i.e. "TRUE" or "FALSE"). At the end I have a button which I'd like to run this code. Essentially, I want to code to go through row by row and do the following:
1. Check to see if both boxes are blank or if both boxes are checked - and if so set the background color to yellow 2. Otherwise set the background color to clear
I have written the following code which accomplishes this task for Row 9. Is there an easy way to repeat this process for rows 10-15 without copying all the text and changing the row numbers?
Then, any way, say "If all the rows (i.e. 9-15) have clear background colors (which would mean that they all 'passed' the test of having exactly one and only one box checked in the row), then run another macro which I have written"?
Rem Check to see if neither box is checked or if both boxes are checked and sets background color to yellow, otherwise sets background color to clear.
If (Range("T9").Text = "") And (Range("U9").Text = "") Or (Range("T9").Text = "TRUE") And (Range("U9").Text = "TRUE") Or (Range("T9").Text = "FALSE") And (Range("U9").Text = "FALSE") Then Range("B9", ("G9")).Interior.ColorIndex = 6 Else: Range("B9:G9").Interior.ColorIndex = 0 End If
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
I'm putting a presentation together for work regarding false alarms and I'd like to count how many alarms have gone off at certain locations and I'm wondering if there is a formula that will accomplish this. I've attached a pic of a spreadsheet containing the data to be used. On the left side, there is a table labeled "Alarms" with columns displaying the dates, street numbers and street names. On the right side of the spreadsheet, there is a table labeled "Activations", which will be used to display the amount of single, double, triple, etc. activations.
For example, using the data, the alarm at "2 Red Oak Row" has gone off 3 times and since there are no other addresses where this has happened, a "1" would be displayed under the box labeled "3" in "Activations". Since the alarm at "4 Winding Way" and the one at "23 Blackberry Lane" have both gone off twice, a "2" would be displayed under the box labeled "2" in "Activations". The same would hold for addresses where the alarm has gone off 3 times, 4 times, 5 times, so on and so forth. In addition, if an alarm has gone off 10 or more times at any residence, the first 10 activations and any subsequent activations would be counted as a "1".
For example, if there is one case where an alarm at a certain residence has gone off 10 times (or more), a "1" would be displayed under box 10. If another residence's alarm also went off 10 times (or more), a "2" would be displayed under box "10".
I am trying to drag a numerical value down (X4-X10) but I need it to repeat two rows in between and simultaneously keep the numbering in sequence only after the repeats 2 rows in between . So far, I have to manually enter or when I select cell X4 and X5 together ( having a value of 1 and 2 respectively) and drag, the value does not repeat 2 rows in between and does not keep the numbering in sequence after the 2 rows.
At Present: X4 1 X5 2 X6 3 X7 4 X8 5 X9 6 X10 7
I need to have
X4 1 X5 1 X6 1 X7 2 X8 2 X9 2 X10 3 X11 3 X12 3
and so on
I have a 2000+ rows to manually input and hence it is not practical!.
how to get it to fill down. Basically depending on the contents of column D, a formula (which also needs to fill with the rows) is copied from sheet 2 in to column K.
Code: Sub Copy() With Sheets("sheet1") typ = .Cells(Rows, Count, "D").End(x1Up).Row
[Code]...
That's what I have. I am totally stuck. the formula needs to relate to column G and fill down too. this is the formula
HTML Code: =IF($G2=2,$G2*90,IF(AND($G2<4,$G2>2),"$270.00",IF($G2>6,360+(($G2-6)*50),IF(AND($G2>=4,$G2
My F4 key (which I use constantly) works for every "repeat" function except for inserting rows or columns. I can repeat every other option EXCEPT inserting rows/columns. I just had Office 2007 uninstalled and had Office 2003 put back on my PC. My IT group can't figure it out.
I'm trying to transpose multiple values in Excel, but I'd also like to repeat row values for columns A through E. The attached file "Raw Data" worksheet shows what I start with, and the "End Result" worksheet shows what I'd like the end result to be.
I want to Autofill a Column C to repeat a set of data in Column A, if Column B contains an integer, as shown below. Being able to Autofill this data allows me to have a dynamic table for use on multiple projects that may have a different amount of rows in Column B.
what I need to do is , while an id value is constant copy 2 adjacent cells to a new location on the same row as the first occourance of the id value, then if the id is the same on the next row repeat the copy and add these 2 values to the cells next to the ones previously copied.
Once the Id value changes then the copy restarts on a new row which is the same as the first occourance as the new id value and repeats the same sequence as described in the first statement.
I have attached a sample spreadsheet showing an example of the source and how I would like it to end up, the colour is only there to seperate the outcome from the source and is not required in the code.
I am trying to drag a numerical value down (X4-X10) but I need it to repeat two rows in between, simultaneously keep the numbering in sequence only after the repeats 2 rows in between, and perform the previously mentioned 2 tasks any row in a column. So far, I have to manually enter or when I select cell X4 and X5 together ( having a value of 1 and 2 respectively) and drag, the value does not repeat 2 rows in between and does not keep the numbering in sequence after the 2 rows.
At Present: X4 1 X5 2 X6 3 X7 4 X8 5 X9 6 X10 7
I need to have
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ] 1 X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+1 1 X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+2 1 X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+3 2 X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+4 2 X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+5 2 X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+6 3 X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+7 3 X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+8 3
and so on...
I have a 2000+ rows to manually input and hence it is not practical!.
I'll try to explain this the best I can. What I have here is a time study. Teachers (which are the control numbers) fill out bubble sheets, then I run them through a scanner. After dissecting the data from the scanner and formatting it to my liking i get this below.
Each teacher/staff member fills out three sheets per quarter. Each letter (bubble) counts as a 0:15 min period of time. Only K thru Q counts as billable time, which I've created a formula to count those letters (column 3). But to be countable each control number has to have three cycles 201,202,203.
So I need something that can take each control number that has three cycles and add their # of 0:15 together.
The italic row below only has one cycle for that control number, so that needs to be deleted or ignored.
Ultimately I would like the results on a separate sheet.
This is only a part of the file, there are over 1000 different control numbers.
I'm trying to create a formula (if possible) that will repeat column headers down a row and repeat every nth time. I have text values in cells E6:AL6 and would like to use a formula that will make it so that E6 will show up B2, F6 will show up in B3, G6 will show up in B4, etc. And then when it gets to B35 (AL6), B36 will then revert back to E6, and the loop will continue - B37 will be F6, B38 will be G6, etc.
My thought is to create an offset/address of some sort that will read as OFFSET(E6,0,x+1) and if x>35, start back at 0. However, I don't think you can create such a formula using an offset?
Sub For_Adam() For x = 1 To Range("G7") Calculate Range("G11").Select Selection.Copy Range("B15").Select ActiveCell.Offset(x, 0).Range("A1").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False
Next x Application.CutCopyMode = False End Sub
Now all I want is for this to be repeated in the next column, so everything is exactly the same but it doesn't start in B15, but starts in C15, then D15 etc.
I have a rather large workbook with a lot of VBA behind it (about 1MB with no data, just formatting and VBA code). It all seems to work perfectly, except one sheet. It is a list of about 35 options with checkboxes beside each option. When the sheet is made visible through VBA code, the user has problems when scrolling the sheet.
It's hard to describe, but it all looks perfect until either the scroll-wheel or the scroll-bar is used to move around the sheet. The display then goes completely screwy. The heading row (which is actually a frozen pane anyway) ends up repeated all down the sheet, as do the column headers (A|B|C|D|E...). If i select another sheet and then back to this one, it's fine, it appears to be only when it is un-hidden through VBA.
I have attached two screenshots as an example... the only thing I have done between the un-scrolled one and the scrolled one is scroll the mouse wheel down and back up once.
