I need to repeat the following rows and formula with column a starting at 9150 and going through 15,000 in 50 point increments. Need formula I can copy and paste easly. see the attached example.
View 4 RepliesI want formula which can automatically populate the amount based on the number of months starting from the date vehicle is received. For Eg.
Nissan patrol Rent is AED 5800/- per month & we deliver it on month Sept 2011 for 24 months then i want excel to automatically populate AED 5800/- for next 24 months starting from Sept 2011.
I have data in rows like this
A B C
1 x y z
2 x y z
3 x y z
4 x y z
5 x y z
6 x y z
7 x y z
8 x y z
9 x y z
10 x y z
11 x y z
12 x y z
What I am looking for is that I want to repeat the rows after every third row in another column. For eg
A B C D E F G H I
1 x y z x y z x y z
2 x y z x y z x y z
3 x y z x y z x y z
how to get it to fill down. Basically depending on the contents of column D, a formula (which also needs to fill with the rows) is copied from sheet 2 in to column K.
Code:
Sub Copy()
With Sheets("sheet1")
typ = .Cells(Rows, Count, "D").End(x1Up).Row
[Code]...
That's what I have. I am totally stuck. the formula needs to relate to column G and fill down too. this is the formula
HTML Code:
=IF($G2=2,$G2*90,IF(AND($G2<4,$G2>2),"$270.00",IF($G2>6,360+(($G2-6)*50),IF(AND($G2>=4,$G2
I'm trying to create a formula (if possible) that will repeat column headers down a row and repeat every nth time. I have text values in cells E6:AL6 and would like to use a formula that will make it so that E6 will show up B2, F6 will show up in B3, G6 will show up in B4, etc. And then when it gets to B35 (AL6), B36 will then revert back to E6, and the loop will continue - B37 will be F6, B38 will be G6, etc.
My thought is to create an offset/address of some sort that will read as OFFSET(E6,0,x+1) and if x>35, start back at 0. However, I don't think you can create such a formula using an offset?
I'll try to explain this the best I can. What I have here is a time study. Teachers (which are the control numbers) fill out bubble sheets, then I run them through a scanner. After dissecting the data from the scanner and formatting it to my liking i get this below.
Each teacher/staff member fills out three sheets per quarter. Each letter (bubble) counts as a 0:15 min period of time. Only K thru Q counts as billable time, which I've created a formula to count those letters (column 3). But to be countable each control number has to have three cycles 201,202,203.
So I need something that can take each control number that has three cycles and add their # of 0:15 together.
The italic row below only has one cycle for that control number, so that needs to be deleted or ignored.
Ultimately I would like the results on a separate sheet.
This is only a part of the file, there are over 1000 different control numbers.
I would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.
View 7 Replies View RelatedI need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I have a table which contains a list of branches eg;
01
02
04
06
I then have a spreadsheet which contains a number of columns and rows.
I want to create a new spreadsheet in the first column it will contain the branch from the table above then the rows and columns in the above spreadsheet
The rows and columns would then repeat for each of the other branches in the table. IE if I have 4 branches in my table and 100 rows in my spreadsheet my new spreadsheet would contain 400 rows
I need to unhide 2 rows at a time starting with rows 28 and 29 IF cell N28:O28 > 0. I need this to be for rows 30 and 31 IF cell N30:O30 > 0, rows 32 and 33 IF cell N32:O32 > 0, rows 34 and 35 IF cell N34:O34 > 0, rows 36 and 37 IF cell N36:O36 > 0, rows 38 and 39 IF cell N38:O38 > 0, rows 40 and 41 IF cell N40:O40 > 0.
There is currently a formula in each of the selected cells that is why I was going for greater than zero.
I'm trying to create an excel worksheet as follows:
Column1 Column2 Column3 Column4 Column5
Date Time In Time Out Hours Worked Pay
01/03/2000
01/04/2000
01/05/2000
.
.
11/11/2008
I want to insert in the first column (Column1) dates starting from 01/01/2000 all the way up to today, 11/11/2008. So I would end up with a unique date on each row.
To accomplish this manually would be a daunting task. I'm a newbie to excel and don't know how to use any in-built functions.
I have raw data stored in one row which I would like to break up into four individual rows.
I cannot get the formula to repeat and I don't want to manually do it.
I have 3 columns and 200 rows. The first column is for Name of product. 2nd column for number and 3rd for $value of number of products. Have 200 rows. Have done a sort and checked. 2 sets of rows are for the same product name. I want to know if it is possible to add up values in 2nd and 3rd column, 2 rows at a time , then 4th and 5th column and so forth, by some formula rather than doing it manually?
View 4 Replies View RelatedUsing an external UNIX program that quieries a database, I export all the data found based on my query and export the report as a text file. THe text file can be up to 1 MB of raw text.
Selecting all text and pasting the data into collum 1 using PASTE SPECIAL -->(TEXT)
All Data is in Collum A
Each record returned has between 40-50 values each on a seperate row, only 10 of which I need.
I am looking for a way to find the rows that begin with the unwanted field, and then delete the entire row.
Otherwise ignore the row.
IE:
AUDFI : (data path loc here)
BILLNUM : 060606
CUTNUM : (0000)
SD : 120012
ED : 121259
CC : 123456789 MATERIAL LISTS AND ITEMS
COMMENT : Multiple lines of text here
with continuing free form data, numbers, operators,
then the next data file would repeat:
ADUFI : (data path loc here)
...
...
...
etc.,
In the above example, I want to delete the rows AUDFI, & CUTNUM and move the below items up to take the empty rows place. The BILL NUM, SD,ED, and COMMENT are filed that are always kept (as well as others). Each record has roughly the same data, each tailored to an event or object.
The number of rows of data dumped into excel can easily exceed 50000, about 200 - 1500 records in the report.
After wards, the data is dumped to a text file for easier analysis.
In BASIC my line might look like
5 START
10 if A:$="AUDFI :" then delete row, move below contents up.
20 if A:$="CUTNUM :" then delete row, move below contents up.
30 END
(I think there needs to be a loop since the vaules AUDFI and CUTNUM (as well as other unwanted fields can occurr 200 - 1500 times each.)
Is it possible to repeat rows on top of every page but one? Specifically, I have a seven page spreadsheet and I don't want the rows to repeat on the seventh page.
View 6 Replies View RelatedI use the following code to copy entire rows from one sheet to another and this is pretty standard.
VB : rng.EntireRow.Copy Sheets("Sheet2").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Assuming that Sheet2 is blank, this of course copies the rows to Sheet2 starting at Cell A2 and down column A. I would like to modify the code so that I can specify at which row the copy should start. For example, I might want to start the copy at A1 instead of A2, or at A10 instead of A2.
I saw this macro posted by Fengore back in 2006, and it works beautifully. Now my question: Is there a way to continue using that string but have it start from a certain row? Columns(1).SpecialCells(xlCellTypeBlanks).EntireRow.Delete
View 2 Replies View RelatedHow would I write something that finds the first populated column in a row, starting at column C and moving to the right?
View 9 Replies View RelatedI have a spreadsheet that contains traffic count data for a two lane road. The data is by direction, by hour, 24 hours a day, 365 days a year so the data is basically 2X 365 = 730 rows of data.
I need to simply add the two directions together for each hour of each day, basically add two rows together, drop down to the next two rows and add them together, repeat.
I need the result as stand alone data on another spreadsheet so the Data, Subtotals operation provided by Excel won’t work for me but something similar that puts the data on another spreadsheet would work.
I also tried to use a formula in the new spreadsheet that added two cells in two rows on the original spreadsheet together and then repeated that process a few times and then tried to drag the formula down but couldn’t get it to repeat correctly.
This macro is recorded, but I need it to start on row 2 and repeat down to row 3000. What changes do I need to make.
I have a list of rows with Yes and No check boxes. Columns "T" and "U" contain the output of these checkboxes (i.e. "TRUE" or "FALSE"). At the end I have a button which I'd like to run this code. Essentially, I want to code to go through row by row and do the following:
1. Check to see if both boxes are blank or if both boxes are checked - and if so set the background color to yellow
2. Otherwise set the background color to clear
I have written the following code which accomplishes this task for Row 9. Is there an easy way to repeat this process for rows 10-15 without copying all the text and changing the row numbers?
Then, any way, say "If all the rows (i.e. 9-15) have clear background colors (which would mean that they all 'passed' the test of having exactly one and only one box checked in the row), then run another macro which I have written"?
Rem Check to see if neither box is checked or if both boxes are checked and sets background color to yellow, otherwise sets background color to clear.
If (Range("T9").Text = "") And (Range("U9").Text = "") Or (Range("T9").Text = "TRUE") And (Range("U9").Text = "TRUE") Or
(Range("T9").Text = "FALSE") And (Range("U9").Text = "FALSE") Then
Range("B9", ("G9")).Interior.ColorIndex = 6
Else: Range("B9:G9").Interior.ColorIndex = 0
End If
I have a spreadsheet where I track resources needed on a project. Each resource that is selected in the resource column has a corresponding % avg and an average number of months where the resource is used. % Avg and # of Months are found in a different worksheet.
What I am looking to do is, for example: if resource A will be on the project starting in May 2015 and assigned at 30% for 7 months, I want to populate 30% starting in the colunm labeled May 2015 and copy the 30% so that a total of 7 months are populated. Also, if any of the values change (i.e: the Resource Name or the Start Month) I want to erase all the percentages that were entered in the row. How can I achieve that with a VBA code? I have formulas that retrieve the # of Months and the % Avg already.
These are the columns that I have in my spreadsheet:
Resource NameStart MonthJan-15Feb-15Mar-15Apr-15May-15Jun-15Jul-15Aug-15Sep-15
I am trying to drag a numerical value down (X4-X10) but I need it to repeat two rows in between and simultaneously keep the numbering in sequence only after the repeats 2 rows in between . So far, I have to manually enter or when I select cell X4 and X5 together ( having a value of 1 and 2 respectively) and drag, the value does not repeat 2 rows in between and does not keep the numbering in sequence after the 2 rows.
At Present:
X4 1
X5 2
X6 3
X7 4
X8 5
X9 6
X10 7
I need to have
X4 1
X5 1
X6 1
X7 2
X8 2
X9 2
X10 3
X11 3
X12 3
and so on
I have a 2000+ rows to manually input and hence it is not practical!.
My F4 key (which I use constantly) works for every "repeat" function except for inserting rows or columns. I can repeat every other option EXCEPT inserting rows/columns. I just had Office 2007 uninstalled and had Office 2003 put back on my PC. My IT group can't figure it out.
View 3 Replies View RelatedI need to accomplish selecting a range using variables for the starting cell and ending cell rows and columns.
Pseudo code (how I'd like the syntax to be, but isn't):
Worksheets(mysheet).range(startCellRow, startCellCol : endCellRow,endCellCol).Select
With Selection
...
End With
I have a form pop up when user runs a macro and it populates the form beginning with ActiveCell. How do I always populate the form beginning from column A (row based on ActiveCell)? It would be really helpful if I could just set cl to take the ActiveCell and back it up to column A.
View 7 Replies View RelatedIn the excel sheet bellow that I'm attaching you will see what I'm looking for.
View 8 Replies View RelatedI'm trying to transpose multiple values in Excel, but I'd also like to repeat row values for columns A through E. The attached file "Raw Data" worksheet shows what I start with, and the "End Result" worksheet shows what I'd like the end result to be.
View 3 Replies View RelatedI want to Autofill a Column C to repeat a set of data in Column A, if Column B contains an integer, as shown below. Being able to Autofill this data allows me to have a dynamic table for use on multiple projects that may have a different amount of rows in Column B.
Outflow % Table
25
50
[Code]......
How can I create a sequence with a formula starting in A1 that will give 1,1,2,2,3,3 and so on horizontally?
View 3 Replies View Related