Drag Down Numerical Value / Repeat 2 Rows And Perform These 2 Tasks In Any Row
Jul 10, 2014
I am trying to drag a numerical value down (X4-X10) but I need it to repeat two rows in between, simultaneously keep the numbering in sequence only after the repeats 2 rows in between, and perform the previously mentioned 2 tasks any row in a column. So far, I have to manually enter or when I select cell X4 and X5 together ( having a value of 1 and 2 respectively) and drag, the value does not repeat 2 rows in between and does not keep the numbering in sequence after the 2 rows.
At Present:
X4 1
X5 2
X6 3
X7 4
X8 5
X9 6
X10 7
I need to have
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ] 1
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+1 1
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+2 1
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+3 2
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+4 2
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+5 2
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+6 3
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+7 3
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+8 3
and so on...
I have a 2000+ rows to manually input and hence it is not practical!.
View 11 Replies
ADVERTISEMENT
Jul 10, 2014
I am trying to drag a numerical value down (X4-X10) but I need it to repeat two rows in between and simultaneously keep the numbering in sequence only after the repeats 2 rows in between . So far, I have to manually enter or when I select cell X4 and X5 together ( having a value of 1 and 2 respectively) and drag, the value does not repeat 2 rows in between and does not keep the numbering in sequence after the 2 rows.
At Present:
X4 1
X5 2
X6 3
X7 4
X8 5
X9 6
X10 7
I need to have
X4 1
X5 1
X6 1
X7 2
X8 2
X9 2
X10 3
X11 3
X12 3
and so on
I have a 2000+ rows to manually input and hence it is not practical!.
View 12 Replies
View Related
Aug 11, 2009
I have a table which contains a list of branches eg;
01
02
04
06
I then have a spreadsheet which contains a number of columns and rows.
I want to create a new spreadsheet in the first column it will contain the branch from the table above then the rows and columns in the above spreadsheet
The rows and columns would then repeat for each of the other branches in the table. IE if I have 4 branches in my table and 100 rows in my spreadsheet my new spreadsheet would contain 400 rows
View 9 Replies
View Related
Dec 16, 2013
I have sheets with over 40000 rows. I grouped them in 60 and I need the average for every group on the 61st (which is blank). For example, when collapsed I have visible the following blank cells:
A61
A122
A183
A244
and so on.
What I want is to enter a formula in A61 for the average of A1:A60 then drag down and have the correct values in all the rest (average of A62:A121 in A122, etc.).
View 4 Replies
View Related
Jun 28, 2014
I have raw data stored in one row which I would like to break up into four individual rows.
I cannot get the formula to repeat and I don't want to manually do it.
View 3 Replies
View Related
May 24, 2007
I have 3 columns and 200 rows. The first column is for Name of product. 2nd column for number and 3rd for $value of number of products. Have 200 rows. Have done a sort and checked. 2 sets of rows are for the same product name. I want to know if it is possible to add up values in 2nd and 3rd column, 2 rows at a time , then 4th and 5th column and so forth, by some formula rather than doing it manually?
View 4 Replies
View Related
Aug 18, 2007
Is it possible to repeat rows on top of every page but one? Specifically, I have a seven page spreadsheet and I don't want the rows to repeat on the seventh page.
View 6 Replies
View Related
Jan 5, 2009
I have a spreadsheet that contains traffic count data for a two lane road. The data is by direction, by hour, 24 hours a day, 365 days a year so the data is basically 2X 365 = 730 rows of data.
I need to simply add the two directions together for each hour of each day, basically add two rows together, drop down to the next two rows and add them together, repeat.
I need the result as stand alone data on another spreadsheet so the Data, Subtotals operation provided by Excel won’t work for me but something similar that puts the data on another spreadsheet would work.
I also tried to use a formula in the new spreadsheet that added two cells in two rows on the original spreadsheet together and then repeated that process a few times and then tried to drag the formula down but couldn’t get it to repeat correctly.
View 7 Replies
View Related
Jul 6, 2007
This macro is recorded, but I need it to start on row 2 and repeat down to row 3000. What changes do I need to make.
View 13 Replies
View Related
Feb 18, 2013
I have a list of rows with Yes and No check boxes. Columns "T" and "U" contain the output of these checkboxes (i.e. "TRUE" or "FALSE"). At the end I have a button which I'd like to run this code. Essentially, I want to code to go through row by row and do the following:
1. Check to see if both boxes are blank or if both boxes are checked - and if so set the background color to yellow
2. Otherwise set the background color to clear
I have written the following code which accomplishes this task for Row 9. Is there an easy way to repeat this process for rows 10-15 without copying all the text and changing the row numbers?
Then, any way, say "If all the rows (i.e. 9-15) have clear background colors (which would mean that they all 'passed' the test of having exactly one and only one box checked in the row), then run another macro which I have written"?
Rem Check to see if neither box is checked or if both boxes are checked and sets background color to yellow, otherwise sets background color to clear.
If (Range("T9").Text = "") And (Range("U9").Text = "") Or (Range("T9").Text = "TRUE") And (Range("U9").Text = "TRUE") Or
(Range("T9").Text = "FALSE") And (Range("U9").Text = "FALSE") Then
Range("B9", ("G9")).Interior.ColorIndex = 6
Else: Range("B9:G9").Interior.ColorIndex = 0
End If
View 3 Replies
View Related
Jan 30, 2014
I have data in rows like this
A B C
1 x y z
2 x y z
3 x y z
4 x y z
5 x y z
6 x y z
7 x y z
8 x y z
9 x y z
10 x y z
11 x y z
12 x y z
What I am looking for is that I want to repeat the rows after every third row in another column. For eg
A B C D E F G H I
1 x y z x y z x y z
2 x y z x y z x y z
3 x y z x y z x y z
View 1 Replies
View Related
Aug 27, 2013
how to get it to fill down. Basically depending on the contents of column D, a formula (which also needs to fill with the rows) is copied from sheet 2 in to column K.
Code:
Sub Copy()
With Sheets("sheet1")
typ = .Cells(Rows, Count, "D").End(x1Up).Row
[Code]...
That's what I have. I am totally stuck. the formula needs to relate to column G and fill down too. this is the formula
HTML Code:
=IF($G2=2,$G2*90,IF(AND($G2<4,$G2>2),"$270.00",IF($G2>6,360+(($G2-6)*50),IF(AND($G2>=4,$G2
View 2 Replies
View Related
Sep 12, 2009
My F4 key (which I use constantly) works for every "repeat" function except for inserting rows or columns. I can repeat every other option EXCEPT inserting rows/columns. I just had Office 2007 uninstalled and had Office 2003 put back on my PC. My IT group can't figure it out.
View 3 Replies
View Related
Feb 8, 2009
Need to sort my data in column A which contains a long list of numerical data. To do this manually using copy and paste would be easy, but not viable because of the large amount of data.
The attached PDF file illustrates the data. I wish to replace each date of dirth entry in column A (one D.O.B. in each cell / row, expressed as YYYYMMDD) with the client identifier number (format 937XXXX) a couple of cells above. And at the same time delete the row containing the client reference (or its contents). The data in column A should retain the same relationship to the data in the other columns (B,C). it may require a short piece of VBA code.
View 3 Replies
View Related
Sep 3, 2008
In the excel sheet bellow that I'm attaching you will see what I'm looking for.
View 8 Replies
View Related
Jan 24, 2009
I'm trying to transpose multiple values in Excel, but I'd also like to repeat row values for columns A through E. The attached file "Raw Data" worksheet shows what I start with, and the "End Result" worksheet shows what I'd like the end result to be.
View 3 Replies
View Related
May 8, 2008
I would like it to scan an entire column (column E) for rows of data that fall into a range of numbers chosen by the user (like maybe a list box or combo box in sheet 1) for example a number greater than or equal to 8 but less than or equal to 15 and copy all of the rows and columns of data across the entire sheet that fit the range from sheet 1 to sheet 2. I would like to use a separate list or combo box for the min and max values in which to search as seen in the example sheet 1 attached. I have tried the autofilters, custom filters and macro recorder with no success as it seems the filters do not like ranges of numbers.
View 3 Replies
View Related
Oct 28, 2008
I need to repeat the following rows and formula with column a starting at 9150 and going through 15,000 in 50 point increments. Need formula I can copy and paste easly. see the attached example.
View 4 Replies
View Related
Jul 7, 2009
I have a list of 130 names in column A. I have a number value between 0-10 in column B (next to the name). I need to insert the number of rows defined by the value in column B, below each row that I already have (if the value is 0, then the row needs to be deleted). The inserted rows have to be filled with the name value from the row above.
For example - before macro:
Joe Bloggs 2
Adam Wilson 10
Peter Andrews 0
Claire Burrows 6
After macro:
Joe Bloggs
Joe Bloggs
Adam Wilson
Adam Wilson
Adam Wilson
Adam Wilson....................................
View 6 Replies
View Related
Apr 17, 2014
creating a Macro to automatically group rows that has no numerical value, for example:
1. 13.4
2. 0
3. 0
4. 33.3
5. 0
and so on...
So for this exercise I need excel to automatically group row 2, 3 5 with one click, and leave other rows with actual numbers visible on the sheet.
View 2 Replies
View Related
Apr 1, 2009
I'll try to explain this the best I can. What I have here is a time study. Teachers (which are the control numbers) fill out bubble sheets, then I run them through a scanner. After dissecting the data from the scanner and formatting it to my liking i get this below.
Each teacher/staff member fills out three sheets per quarter. Each letter (bubble) counts as a 0:15 min period of time. Only K thru Q counts as billable time, which I've created a formula to count those letters (column 3). But to be countable each control number has to have three cycles 201,202,203.
So I need something that can take each control number that has three cycles and add their # of 0:15 together.
The italic row below only has one cycle for that control number, so that needs to be deleted or ignored.
Ultimately I would like the results on a separate sheet.
This is only a part of the file, there are over 1000 different control numbers.
View 14 Replies
View Related
Jul 6, 2006
loop that can calculate the median of dynamic ranges. I need to run through all columns and for each column find the the ranges (there are more ranges and they are seperated with a blank row) with numerical data and then calculate the median and thereafter continue down to find the next range with numerical data in that row and so on.
View 4 Replies
View Related
Jun 11, 2008
I can export inventory data from my Point of Sale system that looks like this:
I need to manipulate it to look like this:
To do so I think I need a macro(?) to:
Copy and insert as many rows as the quantity in Column C. In case of >1 the row is deleted.
This would allow me to print labels for every item in my inventory.
View 3 Replies
View Related
Apr 3, 2014
Code is trying to
1. Where there is data in column B
2. Goto first row of data
2. If column J = "Closed"
3. then select Cells from column B to J in that row and colour these cells in red
4. If column J= "Open"
5. the select Celss from column B to J in that row and colour these cells in grey
4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
===============================================================
Sub Colourclosed()
Sheets("Risks").Select
Dim LastRow As Long
Dim i As Long
LastRow = Range("B" & Rows.Count).End(xlUp).Row
For i = 8 To LastRow
If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select
Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
View 4 Replies
View Related
Mar 7, 2013
I have a list in Excel, and it has the company in one column, and it's information in the next x rows until there is a blank row (4-7 rows). I get that you can copy the rows under the Company, transpose next to the company, and then delete the contents of the cells that you just took the data from, but I have 6200 rows do to this to, for 500+ companies. I tried recording a macro for two entries, and this is what I have (see below), but how do I modify this so that I don't need to type in every single range, and it will do it to the whole column? The data is in column A, I am posting in column B.
Basics for Macro Requirement:
1. Find the blank cell in row A
2. Skip the next cell/row (this is the company)
3. Select all the cells beneath the company cell, until it reaches the blank cell underneath
4. Copy, transpose these cells next to the Company cell (transpose in column B)
5. Delete the contents in row A that were just transposed
6. Find the next cell with data (company)
7. Repeat Steps 2-6
My recorded Macro:
Sub Macro2()
'
' Macro2 Macro
'
' Keyboard Shortcut: Ctrl+q
'
Range("A3:A8").Select
[code]....
View 5 Replies
View Related
Dec 12, 2009
I'd like to find out the formula where numerical valued between 1-2000 equals True and numerical under 0 equals False. Examples are in the attachment.
View 3 Replies
View Related
Oct 30, 2007
I have searched and think I have found what I need to create Outlook tasks from my Excel spreadsheet. I'm hoping that someone here can help me pull it together into something that will be usable in my project tracking spreadhsheet...
I try to keep track of milestones... these milestones are listed in column B of my spreadsheet and are in rows 10 through about 105
For each of my customers I then keep 4 columns D, E, F, G - H, I, J, K - L,M,N,O - etc. Each group of 4 is a different customer....
The customer's first column (D, H, L, etc.) is a Due date of the Milestone that is found in column B.
The second column is a check box that I use to indicate when the milestone is complete
The 3rd column is the completion date
The last colum is just a filler space that helps to separate each customer.
What I would like to do is insert a button at the bottom of EACH grouping of 4 that when pressed would look at the first column for the customer group and for ANY Milestone that has a DUE date process the stuff in the VB below to create an OUTLOOK task for each item that has a DUE date. (It would be conceivable that as it stepped through each row for a customer group of columns that I could have it create 90+ Tasks in Outlook.
A couple of additional things... in row 110 for the first column of the customer I have a DATE or a blank. So for example in D110 it might be blank or a date like 10/29/2007. If it is blank then when I press the button it would loop through ADD the tasks for each row with a due date. If row 110 has a DATE I would get a popup indicating that the tasks are already in OUTLOOK and that they were added on whatever the date is in row 110... This is kind of the safeguard that I don't get the same group of tasks multiple times by pressing the button by mistake.
View 11 Replies
View Related
Jan 20, 2010
I want to use excel to update the tasks in outlook. All I have is a due date (from A2) and a task (from B2) Here is the code I have got so far
View 2 Replies
View Related
Apr 6, 2009
Im having trouble with getting a macro to run at a specific time and day (Every Thursday at 7PM).
Here's what I have done so far..
1. I added my excel file to the task scheduler
2. created a class module and place the code below into it.
In testing the workbook opened but it asked if i wanted to enable or disable the macros - how do I get around this? And it does seem to kick off the macro (create_all).
Private Sub Workbook_Open()
If Hour(Now) = 1130 And Weekday(Now, vbMonday) < 7 Then
' TheNameOfYourCurrentProcedureHere
create_all
If Workbooks.Count = 1 Then
Me.Save
Application.Quit
Else
Me.Close True 'save the changes and close the workbook
End If
End If
End Sub
View 9 Replies
View Related
Aug 7, 2009
I have a worksheet where I calculate the duration it takes for an operation. the format of the worksheet is as folows:
The worksheet is composed of Start and Finish times in this format: 2009/06/02 5:32:19 , so for example,
- Row1 of the worksheet will have "Start" in column H1 and the start time in column B1
- Row 2 of the worksheet directly below has the "Finish" time, with the Finish time information in column B2
So with the help of excelforums I was able to implement a macro to extract the finish time cell found in row B2 and offset it to C1 and do a simple calculation to get the duration in minutes and display it in column D of the same row as "Start".
View 12 Replies
View Related
