Add Two Spreadsheet Rows And Repeat
Jan 5, 2009
I have a spreadsheet that contains traffic count data for a two lane road. The data is by direction, by hour, 24 hours a day, 365 days a year so the data is basically 2X 365 = 730 rows of data.
I need to simply add the two directions together for each hour of each day, basically add two rows together, drop down to the next two rows and add them together, repeat.
I need the result as stand alone data on another spreadsheet so the Data, Subtotals operation provided by Excel won’t work for me but something similar that puts the data on another spreadsheet would work.
I also tried to use a formula in the new spreadsheet that added two cells in two rows on the original spreadsheet together and then repeated that process a few times and then tried to drag the formula down but couldn’t get it to repeat correctly.
View 7 Replies
ADVERTISEMENT
Aug 11, 2009
I have a table which contains a list of branches eg;
01
02
04
06
I then have a spreadsheet which contains a number of columns and rows.
I want to create a new spreadsheet in the first column it will contain the branch from the table above then the rows and columns in the above spreadsheet
The rows and columns would then repeat for each of the other branches in the table. IE if I have 4 branches in my table and 100 rows in my spreadsheet my new spreadsheet would contain 400 rows
View 9 Replies
View Related
Jun 28, 2014
I have raw data stored in one row which I would like to break up into four individual rows.
I cannot get the formula to repeat and I don't want to manually do it.
View 3 Replies
View Related
May 24, 2007
I have 3 columns and 200 rows. The first column is for Name of product. 2nd column for number and 3rd for $value of number of products. Have 200 rows. Have done a sort and checked. 2 sets of rows are for the same product name. I want to know if it is possible to add up values in 2nd and 3rd column, 2 rows at a time , then 4th and 5th column and so forth, by some formula rather than doing it manually?
View 4 Replies
View Related
Aug 18, 2007
Is it possible to repeat rows on top of every page but one? Specifically, I have a seven page spreadsheet and I don't want the rows to repeat on the seventh page.
View 6 Replies
View Related
Jul 6, 2007
This macro is recorded, but I need it to start on row 2 and repeat down to row 3000. What changes do I need to make.
View 13 Replies
View Related
Feb 18, 2013
I have a list of rows with Yes and No check boxes. Columns "T" and "U" contain the output of these checkboxes (i.e. "TRUE" or "FALSE"). At the end I have a button which I'd like to run this code. Essentially, I want to code to go through row by row and do the following:
1. Check to see if both boxes are blank or if both boxes are checked - and if so set the background color to yellow
2. Otherwise set the background color to clear
I have written the following code which accomplishes this task for Row 9. Is there an easy way to repeat this process for rows 10-15 without copying all the text and changing the row numbers?
Then, any way, say "If all the rows (i.e. 9-15) have clear background colors (which would mean that they all 'passed' the test of having exactly one and only one box checked in the row), then run another macro which I have written"?
Rem Check to see if neither box is checked or if both boxes are checked and sets background color to yellow, otherwise sets background color to clear.
If (Range("T9").Text = "") And (Range("U9").Text = "") Or (Range("T9").Text = "TRUE") And (Range("U9").Text = "TRUE") Or
(Range("T9").Text = "FALSE") And (Range("U9").Text = "FALSE") Then
Range("B9", ("G9")).Interior.ColorIndex = 6
Else: Range("B9:G9").Interior.ColorIndex = 0
End If
View 3 Replies
View Related
Jul 10, 2014
I am trying to drag a numerical value down (X4-X10) but I need it to repeat two rows in between and simultaneously keep the numbering in sequence only after the repeats 2 rows in between . So far, I have to manually enter or when I select cell X4 and X5 together ( having a value of 1 and 2 respectively) and drag, the value does not repeat 2 rows in between and does not keep the numbering in sequence after the 2 rows.
At Present:
X4 1
X5 2
X6 3
X7 4
X8 5
X9 6
X10 7
I need to have
X4 1
X5 1
X6 1
X7 2
X8 2
X9 2
X10 3
X11 3
X12 3
and so on
I have a 2000+ rows to manually input and hence it is not practical!.
View 12 Replies
View Related
Jan 30, 2014
I have data in rows like this
A B C
1 x y z
2 x y z
3 x y z
4 x y z
5 x y z
6 x y z
7 x y z
8 x y z
9 x y z
10 x y z
11 x y z
12 x y z
What I am looking for is that I want to repeat the rows after every third row in another column. For eg
A B C D E F G H I
1 x y z x y z x y z
2 x y z x y z x y z
3 x y z x y z x y z
View 1 Replies
View Related
Aug 27, 2013
how to get it to fill down. Basically depending on the contents of column D, a formula (which also needs to fill with the rows) is copied from sheet 2 in to column K.
Code:
Sub Copy()
With Sheets("sheet1")
typ = .Cells(Rows, Count, "D").End(x1Up).Row
[Code]...
That's what I have. I am totally stuck. the formula needs to relate to column G and fill down too. this is the formula
HTML Code:
=IF($G2=2,$G2*90,IF(AND($G2<4,$G2>2),"$270.00",IF($G2>6,360+(($G2-6)*50),IF(AND($G2>=4,$G2
View 2 Replies
View Related
Sep 12, 2009
My F4 key (which I use constantly) works for every "repeat" function except for inserting rows or columns. I can repeat every other option EXCEPT inserting rows/columns. I just had Office 2007 uninstalled and had Office 2003 put back on my PC. My IT group can't figure it out.
View 3 Replies
View Related
Sep 3, 2008
In the excel sheet bellow that I'm attaching you will see what I'm looking for.
View 8 Replies
View Related
Jan 24, 2009
I'm trying to transpose multiple values in Excel, but I'd also like to repeat row values for columns A through E. The attached file "Raw Data" worksheet shows what I start with, and the "End Result" worksheet shows what I'd like the end result to be.
View 3 Replies
View Related
Jul 10, 2014
I am trying to drag a numerical value down (X4-X10) but I need it to repeat two rows in between, simultaneously keep the numbering in sequence only after the repeats 2 rows in between, and perform the previously mentioned 2 tasks any row in a column. So far, I have to manually enter or when I select cell X4 and X5 together ( having a value of 1 and 2 respectively) and drag, the value does not repeat 2 rows in between and does not keep the numbering in sequence after the 2 rows.
At Present:
X4 1
X5 2
X6 3
X7 4
X8 5
X9 6
X10 7
I need to have
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ] 1
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+1 1
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+2 1
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+3 2
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+4 2
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+5 2
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+6 3
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+7 3
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+8 3
and so on...
I have a 2000+ rows to manually input and hence it is not practical!.
View 11 Replies
View Related
Oct 28, 2008
I need to repeat the following rows and formula with column a starting at 9150 and going through 15,000 in 50 point increments. Need formula I can copy and paste easly. see the attached example.
View 4 Replies
View Related
Jul 7, 2009
I have a list of 130 names in column A. I have a number value between 0-10 in column B (next to the name). I need to insert the number of rows defined by the value in column B, below each row that I already have (if the value is 0, then the row needs to be deleted). The inserted rows have to be filled with the name value from the row above.
For example - before macro:
Joe Bloggs 2
Adam Wilson 10
Peter Andrews 0
Claire Burrows 6
After macro:
Joe Bloggs
Joe Bloggs
Adam Wilson
Adam Wilson
Adam Wilson
Adam Wilson....................................
View 6 Replies
View Related
Apr 1, 2009
I'll try to explain this the best I can. What I have here is a time study. Teachers (which are the control numbers) fill out bubble sheets, then I run them through a scanner. After dissecting the data from the scanner and formatting it to my liking i get this below.
Each teacher/staff member fills out three sheets per quarter. Each letter (bubble) counts as a 0:15 min period of time. Only K thru Q counts as billable time, which I've created a formula to count those letters (column 3). But to be countable each control number has to have three cycles 201,202,203.
So I need something that can take each control number that has three cycles and add their # of 0:15 together.
The italic row below only has one cycle for that control number, so that needs to be deleted or ignored.
Ultimately I would like the results on a separate sheet.
This is only a part of the file, there are over 1000 different control numbers.
View 14 Replies
View Related
Jun 11, 2008
I can export inventory data from my Point of Sale system that looks like this:
I need to manipulate it to look like this:
To do so I think I need a macro(?) to:
Copy and insert as many rows as the quantity in Column C. In case of >1 the row is deleted.
This would allow me to print labels for every item in my inventory.
View 3 Replies
View Related
Apr 3, 2014
Code is trying to
1. Where there is data in column B
2. Goto first row of data
2. If column J = "Closed"
3. then select Cells from column B to J in that row and colour these cells in red
4. If column J= "Open"
5. the select Celss from column B to J in that row and colour these cells in grey
4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
===============================================================
Sub Colourclosed()
Sheets("Risks").Select
Dim LastRow As Long
Dim i As Long
LastRow = Range("B" & Rows.Count).End(xlUp).Row
For i = 8 To LastRow
If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select
Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
View 4 Replies
View Related
Mar 7, 2013
I have a list in Excel, and it has the company in one column, and it's information in the next x rows until there is a blank row (4-7 rows). I get that you can copy the rows under the Company, transpose next to the company, and then delete the contents of the cells that you just took the data from, but I have 6200 rows do to this to, for 500+ companies. I tried recording a macro for two entries, and this is what I have (see below), but how do I modify this so that I don't need to type in every single range, and it will do it to the whole column? The data is in column A, I am posting in column B.
Basics for Macro Requirement:
1. Find the blank cell in row A
2. Skip the next cell/row (this is the company)
3. Select all the cells beneath the company cell, until it reaches the blank cell underneath
4. Copy, transpose these cells next to the Company cell (transpose in column B)
5. Delete the contents in row A that were just transposed
6. Find the next cell with data (company)
7. Repeat Steps 2-6
My recorded Macro:
Sub Macro2()
'
' Macro2 Macro
'
' Keyboard Shortcut: Ctrl+q
'
Range("A3:A8").Select
[code]....
View 5 Replies
View Related
Apr 22, 2012
Using excel's text to speech I've put together a basic spreadsheet.
[URL]
Code:
Function talkit(Speech)
Application.Speech.speak (Speech)
talkit = Speech
[Code]....
View 9 Replies
View Related
May 28, 2012
How to highlight rows or data if data repeat in complete row.
View 3 Replies
View Related
Feb 12, 2008
I have got a spreadsheet with many rows of data. One row is product name and the other is date written. Now I want to calculate how long these entries have been on the log. So lets say I have 10 entries called Pension all with different dates and 10 entries called ISA with different dates. So first I need it to look for all the proucts called "Pension" and then to work out how many are 0-3 weeks old and so on. So i want it to look like this but a formula to work it out for me and to update it automatically.
0-3 Weeks 4-6 Weeks 7-9 Weeks 10 Weeks +
Pension 4 3 3 1
ISA 3 4 1 2
(this does not display very well here but I hope you understand what I mean)
I am using Excel 2003 and I dont think it as a WEEKS function so I will do it in days and then devide by 7.
I know that to look for the product i use
=COUNTIF(H:H,"Pension")
The H:H is because the product is on colum H on my spreadsheet
I know to find the date it is
=TODAY()
So to work out something 3 weeks old it would be
=TODAY()-21
View 14 Replies
View Related
Jan 4, 2013
I've got spreadsheet I use to control the inventory of my user equipment; who has it, what is it, where is it, etc.
I'd like to "lock" multiple consecutive cells of each row so that they never seperate. This is because they need to be together. However, periodically, I need to move, sort, or rearrange the sheet.
Is there a way I can "idiot proof" this so that these cells never come unlocked from each other?
There is no vba involved (primarily because I don't know how), and no other scripting either.
View 2 Replies
View Related
Mar 3, 2014
I have approx 150 rows on my spreadsheet, but I am having difficulty viewing the bottom rows. The slider bar on the right hand side actually disappears on the bottom of the page. I am using windows 8. changed the tool bars and that worked, but I want to see the tool bars.
View 2 Replies
View Related
Aug 23, 2012
I have a spreadsheet of 300 rows of data. I need to insert a new row in between each row of data. Example insert a new blank row into rows 1,3,5 ect. Is there a way i can insert multiple rows into every other row without having to do each one separately.
View 1 Replies
View Related
Oct 29, 2013
I have a spreadsheet that has a range of a2 thru j62. I want to scan column B and if it is a 0, I want to hide the row and set the print area to the a2 thru j62 range and print the spreadsheet with the '0' columns hidden
View 2 Replies
View Related
May 24, 2014
I've a few rows that are hidden, and I cannot unhide them using the unhide function. The spreadsheet is not protected. What can I do?
View 5 Replies
View Related
Apr 13, 2009
I have a very large spreadsheet (about 50,000 rows, and to CM of columns) with blocks of data 20 rows high (rows 1-20 are from Building A, rows 21-40 are from Building B, etc). However, not every row in each block of 20 has information in it - some are just placeholders. For example, some blocks may have rows 1-18 filled with data while other blocks may have only 1-6 filled with data. I am interested in programming a macro that would delete the placeholder rows out of the spreadsheet based on a certain criteria. This would probably halve the size of my spreadsheet.
In faux-
For row i
i = 1 to 50,000
If Column B = #NA
Delete row i
Is this something that can be done with a macro, or do I need to go through all of these rows by hand? Obviously, I haven't programmed macros before (I've taken code and run it), but I've programmed in other languages (Java, C#). Could someone point me in the right direction?
View 4 Replies
View Related
Oct 13, 2009
Worksheet (Daily Sales) - daily input, copy to the worksheet (Weekly Sales), Monday through Saturday. The ranges copied are not consecutive. I am using If...then...else.
View 6 Replies
View Related
