The data I am trying to work with has 3 columns:
Date
Hour (1-24)
Value (number measured for the hour)
The DBase only records a time/hour stamp/value when there is a non-zero value. So, when I sort the data, I have hours/days missing.
What I want to do is add rows in Excel such that there is 24 rows per day and 30(or 31) days per month. Most people are trying to DELETE these zero rows, not add them, so I haven't found any help on this.
Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
Table 1
Team 1Team 2Team 3Team 4Team 4Team 5Team 5ABABCity 12531642City 231173705City 367891125City 436251348
Table 2
City 4City 2City 1City 3Team 4BTeam 2Team 5ATeam 4ATeam 1Team 3Team 5B
Table 1
January-12
February-12
March-12
Table 2
Sr. No
Name
Dep
Lates
CL / SL
AL
Lates
CL / SL
AL
Lates
CL / SL
AL
[Code].....
I have an excel file with a table in it. It contains 2051 records (attached). This is just a sample, the original file has around 30,000 rows.
When I start using filters, I run into problems:
Step 1: Filter by Unit, condition (e.g.) Unit_23
Excel shows in the status bar the following message: 437 of 2050 records found.
Step 2: If I scroll to the bottom of the table, the row numbers are colored in blue (normal for a filtered list) however the last row is not colored and it actually should not be shown since its unit is not what I filtered for (its unit is Unit_25)
Step 3: Clear the filter of Unit
Step 4: Sometimes (depending on what I filter for), one or more of the bottom rows are hidden!!!
Attachment 301726
I have a big problem. My table looks like
column A: 1, blank, blank, 2, 3
column B: 3, 3, blank, 5, 1
column C: blank, 3, blank, 5, 1
column D: 3, 3, blank, 5, 1
column E: 3, 3, 2, 5, 1
My problem is how to count rows where columns A,B,C,D are empty, and in column E is a number.
I would like to delete a given row from a table using VBA
If I use the following Code it works
[DeleteTest].Select
Selection.ListObject.ListRows (120).Delete
Is there anyway to run this where the 120 is inserted dynamically. I tried the following but it does not work. Test Delete Row is a named range. It does insert the correct row number, but still does not execute
Dim DelRow As String
DelRow = [TestDeleteRow]
[DeleteTest].Select
Selection.ListObject.ListRows(DelRow).Delete
How to autosort table after a row change.
View 1 Replies View RelatedI think this might be a programming issue (not sure but I hope it can be solved).
I have three sheets, each containing a table. I'd like users to be able toggle or select rows from these tables for inclusion in a fourth table in a new worksheet.
Unfortunately I have zero knowledge of vba and 0.01 knowledge of macros. I'm attaching a sample of what I'm working with.
In the attached, the "price list," "likely to reference," and "optional" worksheets contain the source tables; I've added a column to the right of each called "include" (where I'd like a user to be able to select a desired row).
The "custom" worksheet is where I'd like an assembled worksheet to live.
My table is a much larger version of this:
A B
X1283.786
Y1684.379
Z1719.013
X10745.013
Y10860.668
i want excel to work out the total for x y and z. however i have about 100 different things x y and z could be and its a long list so an automatic way would be great.
I need to run a macro to delete all the rows (except for the first 2) in a table. The table is named "Table1". The problem is the tables size is always different. Is there a way in VBA where I can resize the table to the original size?
View 2 Replies View RelatedIm trying to use VBA to copy old entries from a table on one sheet, to a history table on another sheet once they have been there for two weeks.
That much has been accomplished. However, I would also like the old entries to be removed from the original table.
Each entry is numbered using the following method:
If text is entered into the second column in a row, excel takes the number of the entry before that, adds 1 and places this number in a column outside of the table. The first column of each row then references this number. This way your entry is numbered as soon as you type it in. The reason I referenced outside the table and did not type the formula in the first column directly is because when I did and excel deleted a row through visual basic it messed up the rest of the table. Referencing outside fixes that problem, but there is another.
I have several columns for conditional formatting to the right of my table, full of 1s and 0s. When a row gets deleted in the table, all remaining rows shift up but continue to conditionally format based on the cells they were originally along side of. The problem is, those cells recalculate for the row in the table that is now along side of it.
Is there any way I could make the formulas in those columns evaluate only once and to not re-evaluate once something has moved?
way to insert multiple table rows (not entire rows) at once without having to make a loop? Let's say I want to insert 3 blank rows into my table at row 5. The way to accomplish this with a loop would be:
Code:
For x = 1 To 3
ActiveSheet.ListObjects("Table1").ListRows.Add (5)
Next x
Was wondering if there is a more simple way to do this (maybe even a one liner?)
I can't understand how Delete works when applied to a table.
Here is my table:
Number
Letter
Test
[Code]....
If I use "EntireRow.Delete", I have an error.
If I use "Delete" only, it works for A and B, but for C, it suppresses the Letter column.
By the way, I don't understand why I have to include header (Table1[[#Headers],[#Data],[Letter]]) when I filter to find unique letters at the beginning of the script.
Sub Hidesingles()
For i = 5 To ActiveSheet.UsedRange.Rows.Count
For c = 3 To ActiveSheet.UsedRange.Column.Count
If Cells(i, c) .........
I have 63,893 rows and 3 columns (Parents, Component and Qty) in a table. This would be typical for a Bill of Materials showing the Qty of Components in a Parent. A lot of Components are common to a mumber of Parents.
In total I have 4,259 Parents and 10,904 Components making up this 63,893 rows in my table.
The problem is that neither the Pivot function in Excel nor Access will handle it, least not the way I'm doing it - the bog standard way ! I just get the "Excel cannot complet this task with available resourses......" message.
Anyone any ideas how to get a Pivot or something resembling one so that I end up with the Components as the Row Header and the Parents as Column Headers.
I know I could go in and manipulate the data but I want to be able to create this Pivot like report every month or so without having to reinvent the wheel each time.
i have table in the left side and i want to get the results in the table in the right side skipping blanks row price with taking in consideration blanks are formula contain ""
[IMG][/IMG]
I have a pivot table and i am trying to display the rows in order of relevance. I have a bit of code that will sort the rows into the order I want them which I have included. My problem is that sometimes I will have rows that will not be there, If position 3 doesn't exist I would expect it to display 1,2,4,5 but instead I get an error message.
ActiveSheet.PivotTables("PivotTable11").PivotFields("Baan Order").PivotItems("Nomination") _
.Position = 1
ActiveSheet.PivotTables("PivotTable11").PivotFields("Baan Order").PivotItems("Full") _
.Position = 2
ActiveSheet.PivotTables("PivotTable11").PivotFields("Baan Order").PivotItems("Equal") _
.Position = 3
ActiveSheet.PivotTables("PivotTable11").PivotFields("Baan Order").PivotItems("Target") _
.Position = 4
ActiveSheet.PivotTables("PivotTable11").PivotFields("Baan Order").PivotItems("None") _
.Position = 5
I have two worksehets. The first worksheet contains data on products. The product code is in column A. My second sheet contains a list of product codes in column a. I want to delete all rows in worksheet 1 where the product code doesnt exist in the list in worksheet 2. Can someone provide a outline for a macro to loop over sheet one and look up the value in worksheet 2 and delete the row from worksheet 1?
View 3 Replies View RelatedI wish to create a Pivot Table. It is based on source data with fixed columns (A to W) and dynamic rows. The following is my
Dim WS As Worksheet
Dim DataRange As Range
Set WS = ThisWorkbook.Worksheets("sheet1")
DataRange = Range("A1:W1", Selection.End(xlDown)).Select
ThisWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:=WS.Range(DataRange)).CreatePivotTable _
tabledestination:=Sheets("sheet2").Range("A1"), tablename:="PivotTable1", defaultversion:=xlPivotTableVersion10
Dim PT As PivotTable
Set PT = ThisWorkbook.Worksheets("Sheet1").PivotTables("PivotTable1")
PT.PivotFields("Type of Work").Orientation = xlPageField
PT.PivotFields("Profit Center").Orientation = xlRowField
PT.PivotFields("B/(W) CTD Net Rev").Orientation = xlDataField
Because I'm going to use it in my work, it must be reusable. And every time I use it, the numbers of row are different. Therefore, I made the source data into a dynamic range. The range changes when rows change. However, problem always appears in the following line:....................
I have 3 columns of data "Store", "Week" and "Cust" and use the code below to ensure that it was always 150 consecutive rows long regardless of whether any data is in the row.
This is fine if I just have one week to sort, but I find I now have 52 weeks of data and each week could have a different number of stores. I just need the macro below to run each time a new week starts. I can easily put a space (or something else) at the start of each new week so that a " loop" can check for it.
For i = 1 To 150
If ActiveSheet. Cells(i, 1).Value <> i Then
ActiveSheet.Rows(i).Insert
End If
Next
I would like to achieve is a Yes there are Duplicates & NO there aren't any in Column H. If Column A,B,C,D & E ALL Match & there is another Row that Exactly Matches A,B,C,D & E Then Return a YES or NO in Column H. Though I DO WANT ONE ROW TO STAY as I will Delete the Rest of the DUPLICATES.
View 3 Replies View RelatedPivot tables. I have a dataset from which I make a pivot table. In row labels I have 4 different columns of data below each other.
Level 1
Level 2
Level 3
Level 4
In some cases the data only has three levels, for example:
Earth
Europe
Germany
In other cases it has four levels of data:
Earth
Europe
Germany
Berlin
If I make a pivottable it will give 4 levels for all items. In the first case I mentioned, the data will state:
Earth
Europe
Germany
(blank)
Is it possible to remove the (blank) row as it does not provide any useful information..
I am writing regarding the Pivot table creation with data which contains empty rows.
Recently, I work on a project with a data which contains empty rows. I will attach the file for sample to see what sort of data contains my sheet.
As you can see the data is divided according to some criteria, and it is constantly updated by users. sometimes a new criteria is added at the end of the sheet, that is why I need to create a pivot table, to be able to just changing Source, to update the table and manipulate table in order to get desired results, but I can't remove these empty rows rom the data as far as some unexperienced users have to fill the information and it is more comfortable to have the data separated from each other for them.
However, when creating the Pivot table on this type of data, the pivot table will include the blanks Row Labels there.
In my Pivot table I have 3 fields in the "header - section" of each row
There is also the possibilty in the Page section to choose between subjects (eg physics, chemistry, biology etc) When all rows are displayed there are 68 in total
When I choose Physics there are about 30 customers that have a value in 1 of the rows. Excel shows 30 rows, but I would like all 68 row to be shown, because these are the values that are important to me. I have tried a lot of settings in the pivot table but can't find the correct 1.
What happens a lot is the the rows are "multiplied", meaning that the 1st row header has every combination of the 2nd and 3rd and so one. Which setting is needed to get what I want?
I'm using a vlookup formula, and the thing I'm searching by is a part number. The problem is that in my table array, all the cells for part numbers have that green error flap in every cell, saying "The number in this cell is formatted as text or preceded by an apostrophe."
Some part numbers have letters on the end of them, ie: 12345N. When I go into a particular cell's error drop down menu and choose "Convert to Number," the vlookup will work with this cell. My problem is that the table array is several thousand rows, and I don't know how to fix them all at once.
I need to retrieve information from multiple rows in a table based on certain criteria (date compared to today's date, existence of "no" in a column).
View 6 Replies View RelatedI have attached the data in an excel file here. I'd like to select (or highlight) the rows (based on names) in the table on sheet1 based on the list provided in sheet 2. I've been struggling with using a formula for this one. The list on sheet 2 may be longer than the table on sheet 1(since there are entries on the list which might not be present in the table column 2), and the reverse may also be true. I would like to select "entire rows" of names in the table that are there on the list on sheet 2, not just the names column in the table. See the desired result on sheet 3.
View 9 Replies View RelatedI'm interested in creating a two variable data table with the two variables in the top two rows.
I'm aware that two variable data tables are usually done in an array with variables in the top row and leftmost column. However, as there are multiple outputs to the variations that I want to make it makes sense to have the variations in the two top rows.
I have a pivot table which shows below... I need to set up a conditional format to highlight the row where all fields are "0"
Company
Deals
Opps
Days since Deal
Days since Opp
Days since Meet
Co 1
1
7
80
20
20
Co 2
0
0
0
0
0
Co 3
1
4
30
30
28
Co 4
3
3
30
30
37
I have problems to write a macro to rearrange the table from attachment file sheet1 to sheet2. I have many files that need to transpose rows to columns and with continually years, month, day, and the rest parameters. some to the files many content more then 20 years data.
View 5 Replies View Related