I have two columns C & D. In col C (C10) a time is entered (either 13.45 or 0:33.22 format). If column D (D10) is blank then the time in Col C stays the same (13.45 or 0:33.22). However if Col D has a M in the cell (D10) I want to add 0.24 to the time in Col C (C10) eg 13.69 or 0:33.46. I have tried various formula combinations but keep getting circular reference errors.
View 6 RepliesI'm a structural design engineer and I want to develop my own spreadsheet to calculate required area (mm^2) of reinforcement bars in concrete to avoid concrete cracking due to temperature rise in summer. Available input are min area of reinfor (cell A3), crack width limit (A1) and calculated crack with (A2). For example.....
A1= Crack width limit 0.2mm. A2= Calculated crack 0.28mm (which is higher than the limit 0.2mm; therefore min area of reinfor A3= 1450mm^2 is insufficient to stop concrete from cracking). Now......to stop cracking, I want cell B1 to take 1450 from A3 and keep increasing it until the condiotn A1>=A2 is met and I want cell B1 to display that increament( lets say 1780mm^2). I hope you do get what exaclty I want to do in excel
I don't have much experience in Excel so I don't know anything about Macro/VBA coding etc. Can we do a simple thing like this B1=IF(A1>=A2,A3,somthing here to keep adding a value to A3??) OR do we have to give pragamming code???
If it has to be Macro/VBA, complete coding with an instruction where to write it.
NB: There are several calculations done with manual inputs within the sheet to derive the A2 (0.28mm) value
I have a few (eg file1, file2, file3, file4, file5) files in a directory and i want to open them as individual excel file and I need to do a check on all the opened files first. If Cells(11, 4) = "important", then Count will start from 0 and workbook will be saved as wb_0 , wb_1 and so on. Else the workbook will be discarded and close. So if file2 and file4 are the only 2 files that satisfy the condition, then they will be saved as wb_0.xls and wb_1.xls.?
ChDir "C:Documents and SettingsDesktop"
For x = 1 To 5
Workbooks.OpenText Filename:= _
MyArray(x) _
, Origin:=xlWindows, StartRow:=1, DataType:=xlDelimited, TextQualifier _
:=xlDoubleQuote, ConsecutiveDelimiter:=True, Tab:=False, Semicolon:= _
False, Comma:=False, Space:=True, Other:=False, FieldInfo:=Array(Array( _
1, 1), Array(2, 1), Array(3, 1), Array(4, 1), Array(5, 1), Array(6, 1), Array(7, 1), Array(8, _
1), Array(9, 1)) .....................
Okay I have a basic Time clock calculation in excel (i.e.-(timeout1-timein1)+(timeout2-timein2)="Total time"). What I need to do is convert the "Total time" to be changed to 3 min increments. I don't know if that is the best way to put it but let me show you the chart for the conversions.
3 mins=.05 hrs, 6 mins=.10, etc etc etc.
So lets put this into us
A1 (timein1)= 6:42 AM
A2(timeout1)=11:30 AM
A3(timein2)= 12:00 PM
A4(timeout2)= 5:00 PM (17:00)
So A5(Total Time)=9h 48min, but I need it to equal 9.80 hrs because with the conversion, 48 mins is .80 of an hour. So how can I set up A5 (Total time) to automatically do this calculation? This website is how I would like it to work http://www.1728.com/timecard.htm
I have a worksheet that I enter time values into individual cells:
A1 = 6:00
B1 = 12:00
C1 = 12:45
D1 = 17:15
When I enter these values, I would like some of the values to round to the
next higher "30 minute increment" such as Cell C1 should become 13:00.
I would also like some of the values to round back to the next lower "30
minute increment" such as Cell D1 should become 17:00.
I am working on a model for a school project. Time is in ColA, the number of events is in ColB.
Each event requires one person to work before and after the event. For example, if we assume that I need one person 30 min before the event, one during the event and one 15 min after the event - ColC shows the number of staff required. I would need a formula to calculate ColC. Basically I want excel to add the values of the rows above and below a value if it is within a specified time range
It gets a little bit more complicated unfortunately, the time requirements need to be dynamic - so one day it is 30 min before the event, but another day it could only be 15 min before but 30 min after the event etc.
I was trying to do this with a SUMIF formulas, but couldn't get it to work.
Col A
Col B
Col C
7:00:00 AM
0
1
[Code] .........
I have a column with dates + time under this format: 2005-01-01 00:00:00. I wanted the same thing for the whole year, so, I wrote 2005-01-01 01:00:00. in the cell below, and then did an autofill.
Unfortunately, at some point, the cell goes from
2005-01-05 03:00:00
to
2005-01-05 03:59:59
which is a problem for me, because I was using the hour as an indicator.
And hour(2005-01-05 03:59:59) returns 3 and not 4!
What formula could I use to round up or down time values to the nearest 6 minute increment?
Example:
Time ----> Rounded To
5:02 PM --> 5:00 PM
5:03 PM --> 5:06 PM
4:18 PM --> 4:18 PM
4:19 PM --> 4:18 PM
4:20 PM --> 4:18 PM
4:21 PM --> 4:24 PM
etc.
Below the code allows me to get the last modified, but I want to get the last time the file was access. How do get the "Last Accessed" Date/Time?
If CurrentTime < ActiveWorkbook.BuiltinDocumentProperties("Last Save Time") Then
MsgBox "Date Moved"
I'm trying to calculate when a waiting time falls outside and exceptable time period. This is based on two colums of data. The first column contains a number from 1 to 5 and the second a time period. (see attached example) in column "C" I need a formula that looks at the value in "A" and if it equals (1) and the time period in "B" is > 00:02 it should show "EXCEEDED". If "A" does contain a (1) then the code stops otherwise it does another loop of "A" looking for a (2) and a time in "B" of >00:10 etc.
View 3 Replies View RelatedColumn 1: Date Call is received by helpdesk
Column 2: Time Call is received by helpdesk
Column 3: Drop-down list indicating Priority of call (High,Medium,Low)
In Column 4 I want to enter a formula that adds working hours only to the date and time entered in Columns 1 & 2. The time added will vary depending on what is entered in Column 3 (e.g.: if priority is High add 1 hour, Medium add 2 hours, Low add 3 hours). The working hours i need to adhere to are 09:00-17:00, Monday-Friday.
A person spends some time performing various works (work1, work2...) in a day. Each work can be further divided into tasks (task1, task2...).
I need to find the total time spent by the person doing all these activities.
The attached spreadsheet will explain it better.
I have rows of data in excel that update automatically and i want to check in column B how many times there are simultaneous occurrences of a cell value and then if those occurences have been there for a time specified time duration using column C which has a time and date stamp. The time and date stamp is when the price is saved down.
A Simplified Example:
Item
Action
Date & Time
Red
Buy
09/05/2014 09:00
[Code] .....
What I would like the formula to is to count the occurrences of cell B that have been avilable for longer than say 30 minutes.
Formula that worked out the occurrences of cell B with this formula
=SUM(IF(FREQUENCY(IF($B$2:$B$7="Buy",ROW(B2:B7)-ROW(B2)+1),IF($B$2:$B$7<>"Buy",ROW(B2:B7)-ROW(B2)+1)),1))
So if i wanted to count the simultaneous occurrences of "Buy" then the formula would result 1 and the same for sell if i changed the formula would be 2.
Now i want to try and get a way of using the time those occurrences were available for by using Column C
The simultaneous "Buy" was available from 09/05/2014 09:00 to 09/05/2014 11:01 which is longer than 30 minutes so i want to count that as a occurrence.
Then both the "Sell" were only available for 14 minutes the first time and then only for 20 minutes the second time so none of those would count.
I have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))
A3 contains TODAY()
H114 is the cell being calculated
AA118 is the cell containing the calculated value for the current month.
I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
View 6 Replies View RelatedI'm having trouble with the two formulas working in conjuction with each other.
Condition 1:
=(MOD(ROW(),2)=0)*(COUNTA(3:3))
Condition 2:
=TODAY()>=A1
"Condition 1" seems to override "Condition 2"? Ever see that?
So I have one sheet that needs to pull data through to another sheet (which is a stats summary)
I have a drop down list containing 4 options all of which have to be counted separately on the stats summary sheet. However I only need them counted when a value is input in another cell in that row.
For example: I select option 1 from down down menu, but I only want this to be counted on the stats page when I enter a date in the "date" cell.
Here's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I want to take the date value of a cell, add one day to it and paste it to another sheet's cell. For example if Sheets("x").range("i4").value is 12/12/1999. I want to add a day to it (13/12/1999) and then paste it to Sheets("y").range("d3").value
View 4 Replies View RelatedI have a sheet with the column for time the format should be h:mm:ss, the time begin with 0:00:00 and 10 sec periods 0:00:10 ...until 50sec again in the next count wud be 0:01:00 again 10sec periods.. How to write the Macro, that automatically increse the values of minute (mm)if the ss attains 60 and increment the hour(h) value if mm get 60.
View 2 Replies View RelatedI want to write formula in cells(many cells!) using concatenate. The desired output:
In Sheet2!D1 - i will write concatenate of Sheet1!C6 and Sheet1F6
in Sheet2!E1 - i will write concatenate of Sheet1!C7 and Sheet1F7
in Sheet2!F1 - i will write concatenate of Sheet1!C8 and Sheet1F
Copy and paste formula would not do so i created a macro stated below. The problem is a can not change the ActiveCell.Formula correction.
I have a table... One of my cells is called Capacitors and the number of the cell is 202600. This is the default value. How can i increment this value?
For example:
I have capacitors in one cell with this value => 202600.
But I want to put capacitors in another cell and i want the value to be 202600 + 1 => 202601
Another cell with capacitors with 202600 + 2 => 202602
And so on...
Capacitors.JPG
I currently have a spreadsheet that parses a HL7 message string using "|" as a delimiter. The String that comes before the first "|" becomes the sheet name (Segment). The code executes on each line of the string (Each segment is parsed). The problem is that sometimes there are multiple segments with the same name. So instead of a new sheet being created, all segments are lumped into the same sheet with that name. What I am trying to do is have the code create a new sheet for each segment and if there it is already present, add sheet name with an incremented number.
So given the sample message The MSH, SCH, PID, PV1 etc sheets are fixed. The DoHL7Parsing routine takes the line and parses it out in the existing sheet. The problem I'm having is lines that are the same such as AIP get lumped into one sheet. What I would like to happen is have AIP1,AIP2,AIP3,AIP4,AIP5 and AIP6. Each with the line parsed out. These are parsed by segment not fields. I want to be able to recognize the existing sheets and create new sheets if multiple segments with the same name are being parsed.
Sample Message:
MSH|^~&|SR|500|CL|500|20140804150856-0500||SIU^S14|5009310|P|2.3|||AL|NE|USA
SCH|10262|10262|""|S14^(SCHEDULED)^L|44950^APPENDECTOMY^C4||^^^201408081345-0500^^^^^^2||30|
MIN^MINUTES|^^^201408081345-0500^201408081415-0500|10000000034^ROISTAFF^CHIEF^O||||||||
PID|1|5000|50^^^USVHA&&0363^NI^FACILITY ID&500&L^^20140804~666^^^USSSA&&0363^SS^FACILITY
[Code] ........
Current Code:
Option Explicit
Const HL7_DELIMITER_FIELD = "|"
Const HL7_DELIMITER_SEGMENT = vbLf
Sub DoHL7Parsing(sMessage As String)
Dim vSegments As Variant, vCurSeg As Variant
[Code] .........
I have a value in cell P1 and is always -ve.
This value is calculated by some tedious calcualtion in some other part of the sheet.
By entering value in Cell P2, the value in cell P1 will progress towards +ve number.
What i want is a formula or Macro to increment the value in Cell P2 by 0.01
until value in Cell P1 becomes +ve...
Below is the example of my manual calculation.
When i have
P2=0 P1=-23.58
P2=0.01 P1=-14.78
P2=0.02 P1= -9.30
P2=0.03 P1= -2.92
P2=.04 P1= 1.05
Since i have achieved P1 to be positive, calculation should stop with value in P2=0.04
I have to do this for 31 column and hence manually doing it takes long time
For Next Loop increment. simple For-Next Loop:
View 2 Replies View RelatedI have a formula that I'd like to have increment by one, but I can't figure out how to do it.
Here's the formula:
=IF(INDIRECT("'Supervisor'!B"&ROW()-4)="Y",E12-D12,IF(INDIRECT("'Supervisor'!B"&ROW()-4)="N","0",IF(INDIRECT('"Supervisor'!B&ROW()-4)="","0")))
I'd like to have the -4 in the equation increment to -5 when I paste it to the next row without having to fix each one of them.
I have a input worksheet and in this user have to manually enter the sequence no. The sequence no. heading is not always in one cell that can be in any between any cell from D14 to D21.
I need some code which start the sequence no. with 1 and everytime I click add button. It find the sequence no. in range between D14: D21 and add 1 in the relavant adjacent cell (which can be in from E14 to E21).
See Table below
Start withColumn DColumn ERow No. can be any from 14 to 21Sequence No.1Clicked AddDesiredColumn DColumn ERow No. can be any from 14 to 21Sequence No.2DesiredColumn DColumn ERow No. can be any from 14 to 21Sequence No.previous val +1 and so on
The question that I have is as follows:
For i = 17 To FinalRow Step 14
'Select cells to examine based on For/Next loop Step...
Cells(i, 4).Activate
'Check for "value"...
If ActiveCell = Press Then
[Code]...
The "Cells(i, 4).Activate" statement steps my search criteria forward by the value of "i." The last thing that I want to do with this macro is to increment the value of A4, "Range ("A4").Select" and D6, "Range ("D6").Select" by the value of "i."