How can i leave Cell D3 etc blank untill i have inserted the end date it will look tidier when i do my full spread sheet and also is there a calender on a toolbar i could put on my spread sheet for easy inputing of dates.
View 5 Replies
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have a spreadsheet table which shows different things but in particular has a column of data ranging from numbers 1 to 23. I carry forward these numbers to display in a different table, so am simply linking from the second table into the first to bring that data forward (literally using formula =B1, in top cell, =B2 in second cell and so on). That's fine.
However I would like to be able to show a blank for any occurences of numbers 4, 14 and 24.
Is there a formula that I could use to firstly carry forward the data, but to then leave blank if the value is either 4, 14 or 24?
How can I have my macro run in its cell and still allow the cell to be blank? Say I have a number, 0.99, in the cell and I want to delete it and leave it blank. I can either push "Backspace" or the delete key and it still leaves zeros.
If I push the space bar it stops the macro (which I do not want to happen) and leaves the cell blank because I added a space.
Here is the formula I am using however it interprets the blank cells as 0% and includes it in the average. To make it more difficult there will be some 0%'s.
View 4 Replies View RelatedI have a lot of numbers in different columns:
A B C
1 1 2
2 4 6
3 6 9
4 8 .
5 9 .
6
7
8
9
.
.
.
I want to to order them so they leave blank rows if they don't match...like this:
A B C
1 1 2
2
3
4 4
5
6 6 6
7
8 8
9 9 9
.
.
.
I have an Excel workbook with around 100 worksheets. All of them have similar columns, but the values are stored as text. The length of columns and missingness is different in different worksheets. I will be grateful if any of you could suggest a VBA that could convert the numbers stored as text back to numbers. I have been looking for an answer for a while, but cant seem to find one that automatically looks at every worksheet and converts text into number.
View 1 Replies View RelatedI have some code that filters on blank cells in column D. What I am stuck on, as my knowledge is fairly limited, is how to activate the first blank cell in that column when the filter is on, as the cell # will differ everyday.
Is there simple line of code that will go to this cell?
Data range is A2:A301. From this range sometime all and sometime selected data is required to be copied in another column for example C2
downward. What is needed: select the range from A2:A301 with an input box then the required data to be pasted in C2 downward but with a blank cell after four cells.
C2
C3
C4
C5
blank
C7
C8
C9
C10
blank
and so on.
I'm doing it Ctrl+C n Ctrl+V but that is very time consuming.
I have attached an excel sheet for your reference. I have particular debit values that are to be added between the dates. And Dates are also derived by formula based of payment term.
The ones I need to modify is Highlighted in Yellow. The values to be added is in "Customer Statement" and in H Column
These dates also have formula by which there are derived
-------------------------Current Ageing-------------------------
Date Range
Bucket
Amount
Percent
Start Date
End Date[code].....
I am USing =SUMIFS('Customer Statement'!$A:$A,'Customer Statement'!$H:$H,"=" & E11) but does not work.
I have a spreadsheet that contains dates in column A, the number of rows between each date can vary. Selecting a cell with a date in will activate a checklist in the form of a UserForm.
I am trying to create a macro that will count the number of rows from one cell with a date, to the next cell with a date, and then resize the selection for printing.
So far I have this;
Code:
Sub test()
Application.ScreenUpdating = False
Set InitialCell = ActiveCell
[Code]....
My problem with this code is that when it reselects the InitialCell, the UserForm is reactivated. Is there a way to achieve the same results without having to reselect the InitialCell, and therefore the UserForm wont pop up? I tried adding the Unload UserForm1 line but it doesnt have any affect, the form still pops up.
i am looking for a code that i just can not make my brain is not working i guess. i have this formula added to c3 because i need this in there also =IF(I80=G80,O80,N80) also i need to add this:
in cell a1 if it is blank i need cell b2 and b3 to add together and make cell c3 blank?
Attached is a sample to add and delete "X" from a cell. The problem is after a single click to add "X", to delete "X", the mouse pointer needs to leave the cell then come back to cell to delete. I would like to add and delete "X" by toggle the mouse without leaving the cell.
View 3 Replies View RelatedI would typically consider myself a decent Excel user, but I haven't been able to solve this one. Maybe it's just the lack of sleep now. I am attempting to combine 4 cells into one where the last cell contains a date. Below is the formula I am using:
=B3&" "&C3&" "&D3&" "&TEXT(E3,"m/d/yy")
It works when all of the cells have values, but the only problem I am having is that some of the dates (in column E) are blank. When this cell is blank the default date that displays is "1/0/00." If I add the typical, " " at the end it says the formula has errors. The need for the TEXT(E3,"m/d/yy") for the cells that contain dates is throwing me off.
I have a series of columns that have dashes in them and want to remove just specific dashes from the cell
Example of original 70489-344-15-001
This is what I want --> 70489-34415001
Got about 1000 of them ...
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I would like to have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, I would like the entire row to be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code:
[Code] .....
However when this macro runs, the row left behind on the original sheet is a blank row and I don't want this. I would like it to be continuous spreadsheet, not dotted with random blank rows!
How can I auto fill a range while leaving the cell number the same?
Code: =IF(AND(B4>=c2,b4=c2,b4=c2,b5=c2,b6=c2,b7=D2,b4=E2,b4=F2,b4=G2,b4=H2,b4
I am trying to remove the numbers from a cell leaving just the text.
Say cell A1 contains Blk1Crd2 I would like say cell B1 to contain BlkCrd.
And preferebly I do not want to run a macro.
I am looking for a syntax or function wherin i can replace all lines in different cells containing specific string or text in it. e.g. Few cells in sheet contains " This guy is for deployment", other few cells may contain "guy is for core deployment" and other cells may have " project is specific deployment". I want to replace all such lines which contain a word "deployment" with ony one word "Deployment".
View 7 Replies View RelatedI am trying to extract some data from a cell leaving the rest of the cell untouched.
I would like to extract C:UsersDanMusicIan MusicKaraokeKaraokeBob Marley & The Wailers - Jammin'.mp3 from the cell leaving Bob Marley & The Wailers - Jammin'.mp3 in the. I have to do this to 3000+ rows.
I need to remove only numbers from excel cell - I have tried using the "constant" function but did not work. I have thousands of cells with a consistent 4 digit number like this:
1000 the rest is text
How can I remove only numbers but leave all text in the cell and then if I can trim the cell so there are not any spaces at the beginning afte removing the numbers.
In this spreadsheet I am working on for calculating vacation time based on accrual rate. how to add pay period dates automatically based upon the first on entered. I have done this before in a personal budget spread sheet and this is what I have in that. First cell I enter the date Second and following cells I have the formula "=IF(DAY(E$8+7)>7,E$8+7,"")" Everything works perfectly. No matter what I put in the first cell the following cells will adjust and display dates 7 days later from the previous cell.
I am trying to do the same thing except pay period dates are 14 days apart so I put the same formula except change the "7's" to "14's). The problem I am having is that ONLY the first cell displays the correct date, the second displays a blank cell and the remaining displays "#VALUE!". What the heck is going on? I cannot figure out why this formula works in one circumstance but not the other.
I am not sure what I am doing wrong, but what I am trying to do basically is what ever I enter in the first cell, I want all remaining cells in the date column to enter the date of 14 days later. Example, I enter in the first cell 3/27/09, in the next cell I want 4/10/09 and in the next cell I want 4/24/09 to be entered and this all the way down.
it has various headings - but the ones I am stuck on are below.
BADGENAMEDATE Issued
He has set up a basic vlookup so that typing in his badge number also will type out his name. However, he also wants the current date to come up every time he does this.
As the names and badge number don't change and have no difference from row to row, how can I get it to date stamp it with a different date each time?
The code is supposed to project review dates 1 month, 2 months and 3 months after the start date, but the first "cell offset" line on is projecting the next day instead of next month, its driving me nuts!!, the others are working fine
Code:
Sub reviews()
Dim cell As Range
For Each cell In Range("L1:L200")
If IsDate(cell) Then
cell.Offset(, 10).Value = DateAdd("m", 1, cell.Value)
cell.Offset(, 11).Value = DateAdd("m", 2, cell.Value)
cell.Offset(, 12).Value = DateAdd("m", 3, cell.Value)
cell.Resize(, 10).AutoFill cell.Resize(, 11)
End If
Next cell
End Sub
I have a spread sheet that shows the dates items were shipped. When trying to work out the value of parts shipped in a month using SUMIF I get the value zero, I believe this to be because (obviously), there are multiple dates of ships during the month, I therefore tried ignoring the day of ship in the SUMIF but this did not work, the date format is DD/MM/YYYY.
View 9 Replies View Related1) To be able to get the current date in the format of 3/10/2008
2) To be able to take dates from 2 cells and get an integer value for the number of days between the two dates
I'm trying to limit the information people can put into my format and therefore to ensure they put in a the correct date etc i'm wondering if it is possible to have a calendar pop up to click on the date for a particular cell?
View 9 Replies View RelatedI'm having great difficulty adding hours to dates in Excel. In cell A1 I have a number which is calculated from a formula, it will normally return whole number values between 1 and 100. In cell A2 I have a start date and time i.e. 14/2/07 06:00:00 in cell A3 I want to add the number in A1 as hours to the date in cell A2. I am using the formula in A3 as =A2+TIME(A1,0,0) it seems to work okay for numbers that don't take the date onto the next day but if I try to add 24 hrs or 48 hrs for example the date still stays the same.
View 7 Replies View Relatedhow i can automatically add a week to a start date i have in a rotas for the whole year?.
View 3 Replies View RelatedThe way the code works right now is that I have it run as a few loops. it will first loop through the first worksheet in the array and delete what I need and then when that loop finishes it will run two macros that I have added in, then it will loop to the next worksheet in the array. right now it is only 2 sheets but eventually it will be many more. just working out the code for now. What I would like to do is in the second loop. my second macro in the code formats each page and, what I would like to do is add a date column to my code. I need to start at 1/05/2014 and then for the next iteration in the loop add 7 days.
[Code] ......
