I have a lot of numbers in different columns:
A B C
1 1 2
2 4 6
3 6 9
4 8 .
5 9 .
6
7
8
9
.
.
.
I want to to order them so they leave blank rows if they don't match...like this:
A B C
1 1 2
2
3
4 4
5
6 6 6
7
8 8
9 9 9
.
.
.
I want to rearrange(sort asscending) columns based on numerical value in column header string through VBA macro. Please check attachment.
i.e. (Present Data)
# A B C D
1 col.1 col.4 col.3 col.2
(Output Data )
# A B C D
1 col.1 col.2 col.3 col.4
test.bmp‎
I am having trouble trying to figure out how to insert blank cells:
I need to insert cells, in columns B through H, equal to the number of returned IDs in column B.
Please take a look at the spreadsheet I attached.
Here is the code I am using to separate the IDs in column B so that I get one ID in each A cell. When I do this it separates them great, but then I have to manually go in and insert cells down so that the rest of the rows match up with the right ID.
Sub Macro1()
Dim fromCol As String
Dim toCol As String
Dim fromRow As String
Dim toRow As String
[Code] .....
sample of separate.xlsm
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have a spreadsheet table which shows different things but in particular has a column of data ranging from numbers 1 to 23. I carry forward these numbers to display in a different table, so am simply linking from the second table into the first to bring that data forward (literally using formula =B1, in top cell, =B2 in second cell and so on). That's fine.
However I would like to be able to show a blank for any occurences of numbers 4, 14 and 24.
Is there a formula that I could use to firstly carry forward the data, but to then leave blank if the value is either 4, 14 or 24?
How can I have my macro run in its cell and still allow the cell to be blank? Say I have a number, 0.99, in the cell and I want to delete it and leave it blank. I can either push "Backspace" or the delete key and it still leaves zeros.
If I push the space bar it stops the macro (which I do not want to happen) and leaves the cell blank because I added a space.
How can i leave Cell D3 etc blank untill i have inserted the end date it will look tidier when i do my full spread sheet and also is there a calender on a toolbar i could put on my spread sheet for easy inputing of dates.
View 5 Replies View RelatedHere is the formula I am using however it interprets the blank cells as 0% and includes it in the average. To make it more difficult there will be some 0%'s.
View 4 Replies View RelatedI have an Excel workbook with around 100 worksheets. All of them have similar columns, but the values are stored as text. The length of columns and missingness is different in different worksheets. I will be grateful if any of you could suggest a VBA that could convert the numbers stored as text back to numbers. I have been looking for an answer for a while, but cant seem to find one that automatically looks at every worksheet and converts text into number.
View 1 Replies View RelatedI have a report that lists the # of times an agent in a call center passed or failed their call based on specific guidelines. The report that's generated will not show the failed category if they didn't fail any calls. I've attached what the report looks like. I'm trying to format the report so that in column A I have the name, column B the passed calls and column C the failed calls. Column B and C can be interchanged...doesn't matter too much. If they don't have any failed or passed calls, I'd like a 0 to show up. I've tried messing with filters and INDEX/MATCH functions but can't make any headway.
View 2 Replies View RelatedDaily I am getting a file which have so many columns with different names. I used to select and move my required columns to separate place. For exp.
I have the file with various columns, such are.
Sales Qty, Year, Tax, Company Code, Discount Paid, Sales Amount, Company Name
The above column order are not constant, daily the order will changes. But we have to make the order as below
Company Name, Company Code, Year, Sales Qty, Sales Amount, Tax, Discount Paid
Like this we have so many columns in the file and we used to rearrange as required.
Any formula or any macro to avoid this manual work with error, so that i will save my time and free from error.
I have an Excel sheet that is in rows. I want to separate the data into columns. Each sample is separated by a space in the rows. So sample 1 is A1 is the name and B1 is the actual name. A2 is the description and B2 is the description. Each sample is +or- rows. Sample 1 may be 8 rows but sample 2 may be 6 rows. What type of formula or macro do I use to arrange the samples into columns instead of rows so the data will be like A1 name, A2 description, etc... and A2 will be sample 2 name, and B2 will be sample 2 description, etc...
View 7 Replies View RelatedRearrange dataset from columns to rows
However, the solutions do not work if "species " are text instead of numbers:
Parcel
Species1
Species2
Species3
[Code]...
I create a report where in I need to rearrange the columns in a particular manner as required by the client. Any macro which will will work as per following criteria.
Column headers start from A1 onwards (the last column header might vary depending on the creator, I get the report from a different team). The number of rows of data might vary.
For changing the order of columns, the macro should look for a column with the header "Close Date", cut it and insert is before a column with header "Bookings". Then, the macro should look for a column with the header "Description", cut it and insert is before a column with header "Selling BU". The macro needs to then cut two adjacent columns namely "Sector" and "Sub-Area" and insert it before the column with header "Total Bookings".
I have an excel file with data that was entered in rows instead of columns and I need to rearrange the data into columns. Here's what my data looks like now, with what should be field names in column one and values in column two:
Company Name : Excel Company
First Name : Jack
Last Name : Smith
Phone : 555-661-6674
Email : ozgrid_rocks@excelgods.com
(this continues in a repeating pattern for thousands of rows)
I need the data like this:
Company Name : First Name : Last Name : Phone : Email
Excel Company : Jack : Smith : 555-# : ozgrid_rocks@url
I have problems to write a macro to rearrange the table from attachment file sheet1 to sheet2. I have many files that need to transpose rows to columns and with continually years, month, day, and the rest parameters. some to the files many content more then 20 years data.
View 5 Replies View RelatedI saw a post that needed a solution for moving blocks of cells in order to get fewer rows but more columns. The post is gone but I'd like to think my work wasn't in vain as the algorithm was more difficult than I thought. The problem was wanting make a 5000 X 4 grid into a 1700 X 12 grid, 55 rows and 4 columns at a time. This is sometimes done for visiblity or printing purposes to get more data going across instead of down. An example would be wanting to have more data accross on a print page and the page holds 55 lines of data.
For example, A56:D110 would be moved to E1:H55, A111:D165 to I1:L55, A166:D220 to A56:D110 etc. The code is somewhat generic so different blocks of rows and columns can be specified. To see this code work, enter the number 1 in columns A-D, then fill series -> step by one for a thousand or so rows. Then run the code.
Sub FewerRowsMoreColumns()
'Rearranges blocks of cells so the end result is more columns and fewer rows
Dim RowStop As Long
Dim ColStop As Integer
Dim RowStep As Long
Dim ColStep As Integer
Dim RowOffset As Long
Dim rw As Long
Dim col As Integer
ColStop = 12 'Enter the last column number you want the cells moved to
RowStep = 55 'Enter the number of rows you want to move at one time
ColStep = 4 'Enter the number of data columns you are starting with.....................
How can I auto fill a range while leaving the cell number the same?
Code: =IF(AND(B4>=c2,b4=c2,b4=c2,b5=c2,b6=c2,b7=D2,b4=E2,b4=F2,b4=G2,b4=H2,b4
I am trying to remove the numbers from a cell leaving just the text.
Say cell A1 contains Blk1Crd2 I would like say cell B1 to contain BlkCrd.
And preferebly I do not want to run a macro.
I have blank spaces between data that I wanted to fill up with the same info as a group. the problem is it is not in a fix format.
For example 1
___A_______B________C________D
1_aaaa____data a____data a____data a
2_________data a____data a____data a
3_________data a____data a____Total
4_________data b____data b____data b
5_bbbb____data b____data b____data b
6_________data b____data b____Total
I need to fill A1 & A3 with aaaa and A4 & A6 with bbbb
Is there a way I can do that? the data is seperated only by the "Total"
Am i able to remove blank spaces from cells retrospectively?
i.e. i have 1000 cells with names appearing in a cell thus " john smith" i want it to be "john smith".
so just removing the leading blank space only.
I have a worksheet where the user input data and i have to make a macro that exports certain cell from the worksheet to a text file without any separating symbol, just like “CONCATENATE and EXPORT”. This is not hard to do, i’ve done it already. But the difficult part is here. My customer wants this macro to be interactive with the user and with an AS400 server that takes the textfile and reads it to find the value of certain variables, something like the opposite process of CONCATENATE. The hard part for me is that if any of the cells concatenated is blank i have to fill the text file with blank spaces.
If the concatenated cells are:
|one| two| three| tour| five|
the exported text to the text file will be:
onetwothreefourfive
But if one of the cells is blank:..................
I'm compiling several old worksheets into a single database for a research study. The worksheets contain patient data. Some of the worksheets have the patient's last name, first name, and middle initial entered all in one cell like this: Smith,John R. Compounding the problem is the fact that sometimes the name is entered with a space between the comma and the first name, sometimes not.
I have formulas to break the name out into three separate columns "lName, "fName", "midInit". However, if the name in the original cell has a space between the coma and the first name, then the “fname” column will contain a blank space in front of the name. This is problem because patients names can appear in the database more than once. Some patients are in the database several times.
If patient “John R. Smith”, for example, is entered in the database as”
“Smith” “John” “R “
and also as
“Smith” “<space>John” “R”
then the database won’t recognize them as the same name when I search for John Smith’s data. Right?
If so, then I need a way to eliminate the empty spaces in front of the first names. Like I said, some have empty spaces and some don’t. I could do this by hand, but there are over 1000 entries in these worksheets.
I am trying to get excel to sum totals, but exclude answers that are outside
of a certain range. I can get it to do this by using =IF(Z8>0.5,Z8,0).
However, I need it to display absolutely nothing in the cells, rather than a
zero because it alters future calculations.
On a userform, I have three textboxes, one listbox, and an OK button. When the user presses the OK button, the information in these boxes is pasted onto a worksheet. I am wondering how I can detect if any of these boxes have been accidentally left empty, so as to prevent the user from pasting an incomplete entry onto the worksheet. This is what I have so far (this is part of the routine that executes when the OK button is pressed):
If EnterGrowerTextBox.Text = "" Then
MsgBox "Please Enter the Grower Name"
Exit Sub
End If
If EnterAmountTextBox.Text = "" Then
MsgBox "Please Enter the Number of Chicks"
Exit Sub
End If
If EnterBreedTextBox.Text = "" Then
MsgBox "Please Enter the Breed"
Exit Sub
End If......................
I need to clear a value in a cell(what ever may be the value) based on a condition in another cell and set it to blank. Ex: If cell A is blank and then i need make cell B also blank, if cell A has some value then i should not disturb B I need to do this using formula. I have tried the below, but no use, IF(AA1="",REPLACE(Y1,1,10,""))
View 2 Replies View Relatedi have a sheet that contains side-by-side,below two formatted colums which has continuous weeks appearance(named PE sheet). i wanna to rearrange the colums to be a single top-down colums according to continuous weeks(named sheet2.are there any easier and faster techniques?a macro probably or a function? arrange(english).xlsm
View 1 Replies View RelatedEvery AM I run a report that has ALL of our company order numbers from the 2 systems we use. I get those reports and put them into 2 columns. instead of manually inserting so they all match up, is there a way to do this automatically? ....
View 9 Replies View RelatedI've searched quite a few times for Concatenating Multiple Columns and ones for Concatenating with Spaces.
I've found solutions that say use
=concatenate(A1, " ", B1)
or the VBA equivalent
I have at least 15-20 columns which I wish to concatenate.
Is there an easier way than to type for all 15 columns?
=concatenate(A1," ", B1," ", C1,....)
Also, the number of columns of each row vary
In Column A, I have several rows of data. Some cells contain numbers and some contain text and some are blank. In Column C, I only want the numbers in Column A. I do not want the text and I cannot have any gaps in the column.
So for example:
Column A: row 1: 456 row 2: 789 row 3: text row 4: text row 5: 398 row 6: text row 7: blank row 8: 124
in Column C I need:
row 1: 456 row 2: 789 row 3: 398 row 4: 124