Leaving Cell Blank If Certain Value

Sep 4, 2008

I have a spreadsheet table which shows different things but in particular has a column of data ranging from numbers 1 to 23. I carry forward these numbers to display in a different table, so am simply linking from the second table into the first to bring that data forward (literally using formula =B1, in top cell, =B2 in second cell and so on). That's fine.

However I would like to be able to show a blank for any occurences of numbers 4, 14 and 24.

Is there a formula that I could use to firstly carry forward the data, but to then leave blank if the value is either 4, 14 or 24?

View 4 Replies


ADVERTISEMENT

Leaving Blank Cells Blank In Dragging Formula Combining Different Formulas In One Cell?

Aug 2, 2014

I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.

View 8 Replies View Related

Leaving The Cell Blank But Allowing The Macro To Run

Mar 15, 2007

How can I have my macro run in its cell and still allow the cell to be blank? Say I have a number, 0.99, in the cell and I want to delete it and leave it blank. I can either push "Backspace" or the delete key and it still leaves zeros.

If I push the space bar it stops the macro (which I do not want to happen) and leaves the cell blank because I added a space.

View 12 Replies View Related

Adding Dates But Leaving A Cell Blank

Aug 20, 2009

How can i leave Cell D3 etc blank untill i have inserted the end date it will look tidier when i do my full spread sheet and also is there a calender on a toolbar i could put on my spread sheet for easy inputing of dates.

View 5 Replies View Related

Formula To Average Numbers Leaving Out Blank Cells

May 26, 2009

Here is the formula I am using however it interprets the blank cells as 0% and includes it in the average. To make it more difficult there will be some 0%'s.

View 4 Replies View Related

Rearrange Columns By Number Leaving Blank Spaces

Oct 16, 2013

I have a lot of numbers in different columns:

A B C
1 1 2
2 4 6
3 6 9
4 8 .
5 9 .
6
7
8
9
.
.
.

I want to to order them so they leave blank rows if they don't match...like this:

A B C
1 1 2
2
3
4 4
5
6 6 6
7
8 8
9 9 9
.
.
.

View 11 Replies View Related

Converting Text To Numbers In Multiple Sheets While Leaving Missing Values Blank?

Jul 24, 2013

I have an Excel workbook with around 100 worksheets. All of them have similar columns, but the values are stored as text. The length of columns and missingness is different in different worksheets. I will be grateful if any of you could suggest a VBA that could convert the numbers stored as text back to numbers. I have been looking for an answer for a while, but cant seem to find one that automatically looks at every worksheet and converts text into number.

View 1 Replies View Related

Check And Uncheck Without Leaving The Cell

Feb 26, 2014

Attached is a sample to add and delete "X" from a cell. The problem is after a single click to add "X", to delete "X", the mouse pointer needs to leave the cell then come back to cell to delete. I would like to add and delete "X" by toggle the mouse without leaving the cell.

View 3 Replies View Related

How To Remove Specific Dashes Within Cell Leaving Others

Jul 28, 2014

I have a series of columns that have dashes in them and want to remove just specific dashes from the cell

Example of original 70489-344-15-001

This is what I want --> 70489-34415001

Got about 1000 of them ...

View 2 Replies View Related

Copy / Paste A Row (without Leaving Empty Row Behind) If Cell Contains A Value

Jul 24, 2014

I have 2 worksheets, one called "Consolidated" and one called "Converted".

I would like to have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, I would like the entire row to be cut and pasted onto the "Converted" worksheet.

I have managed to do this with my current code:

[Code] .....

However when this macro runs, the row left behind on the original sheet is a blank row and I don't want this. I would like it to be continuous spreadsheet, not dotted with random blank rows!

View 6 Replies View Related

Autofill Range While Leaving The Cell Number Same?

Jul 30, 2012

How can I auto fill a range while leaving the cell number the same?

Code: =IF(AND(B4>=c2,b4=c2,b4=c2,b5=c2,b6=c2,b7=D2,b4=E2,b4=F2,b4=G2,b4=H2,b4

View 7 Replies View Related

Remove The Number From A Cell Leaving Just The Text

Jan 3, 2009

I am trying to remove the numbers from a cell leaving just the text.

Say cell A1 contains Blk1Crd2 I would like say cell B1 to contain BlkCrd.

And preferebly I do not want to run a macro.

View 9 Replies View Related

Replace Cell Text Leaving 1 Word

Jul 10, 2007

I am looking for a syntax or function wherin i can replace all lines in different cells containing specific string or text in it. e.g. Few cells in sheet contains " This guy is for deployment", other few cells may contain "guy is for core deployment" and other cells may have " project is specific deployment". I want to replace all such lines which contain a word "deployment" with ony one word "Deployment".

View 7 Replies View Related

Extract Data From A Cell Leaving Rest Of Cells Untouched

Mar 28, 2014

I am trying to extract some data from a cell leaving the rest of the cell untouched.

I would like to extract C:UsersDanMusicIan MusicKaraokeKaraokeBob Marley & The Wailers - Jammin'.mp3 from the cell leaving Bob Marley & The Wailers - Jammin'.mp3 in the. I have to do this to 3000+ rows.

View 9 Replies View Related

Remove String Of Numbers From Excel Cell Leaving Only Text?

Dec 4, 2013

I need to remove only numbers from excel cell - I have tried using the "constant" function but did not work. I have thousands of cells with a consistent 4 digit number like this:

1000 the rest is text

How can I remove only numbers but leave all text in the cell and then if I can trim the cell so there are not any spaces at the beginning afte removing the numbers.

View 8 Replies View Related

Run Macro On Leaving Textbox

Jan 13, 2010

I'm in eager need of a command to run a macro on leaving a userform textbox;

View 2 Replies View Related

IF Blank Or If Not Blank Function That Works With Adjacent Cell With Formula In It?

Aug 12, 2014

I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).

What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)

View 5 Replies View Related

IF Statement To Leave Cell Blank If Multiple Cells Are All Blank?

Mar 12, 2014

I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.

View 8 Replies View Related

How To Populate Blank Cells With Sequence Until Non Blank Cell Is Encountered

Mar 22, 2014

I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.

What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).

This all needs to be done in Arial, 10pt, white.

View 10 Replies View Related

List - Filling In Each Blank Cells With Value Contained In First Non-blank Cell Above It

Feb 27, 2013

I have a list that looks something like this:

Column B

Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5

The range of cells in column B containing the items has a name "ColStreams"

I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.

View 2 Replies View Related

Renaming Worksheets While Leaving Some Unchanged

Dec 18, 2012

I have a workbook with 70 worksheets and I'd like to rename 65 of them while leaving the first 5 worksheets unchanged.

The following changes all worksheets. Is there anyway to modify so that the name on the first 5 worksheets remain unchanged.

Sub ChangeWorkSheetName()
Dim WS As Worksheet
i = 1
On Error Resume Next
For Each WS In Worksheets
WS.Name = "Cost" & i
i = i + 1
Next
End Sub

View 6 Replies View Related

Removing Text And Leaving Just Numbers

Feb 16, 2009

i have a sheet dealing with part numbers and a paramiter exported from a programme.

L=1000MM | L/R is an example.

now
i use replace to get rid of everything before the number but anything after the mm is totaly different most of the time.

is there a way that i can get rind of anything after, and including, the mm?

or by some chance a command that will just leave me with the number allone?

View 10 Replies View Related

Warning Messages Before Leaving Sheet

Jan 3, 2007

Is there a way to have a reminder/warning message pop up before a user leaves a specific sheet?

I need users to sort a tool list before they leave the sheet and move on to a different sheet?

The name of the sheet is "Unit Tools". The command button is named "Sort Tool List"

View 4 Replies View Related

Minimize Window Leaving Userform Only

Oct 13, 2007

Is there a way to have the excel window minimized while a userform is open so it looks tidy in VB?

View 3 Replies View Related

Delete Duplicate Rows Leaving 1

Oct 19, 2007

The problem is a little complex, I have a large spreadsheet (10,000+ entries) and a smaller spreadsheet (100 or so entries). I merged them together, and now I need to find a way to delete all rows that are unique.

Reasoning: I accidentally deleted a few hundred product orders from our system, and need to find a way to re- import them from a backup SQL dump we have, but not the whole table

View 9 Replies View Related

Replace #VALUE! Error For Blank Cells With Blank Cell

Nov 17, 2008

The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.

=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))

View 9 Replies View Related

Run Macro After Leaving Shape Editing Mode?

May 14, 2014

I've got a macro function which calculates the area of a polygon freeform using the 'shoelace'-methode. I would like to excute this function after i leave the shape editing mode.

For example: I have a square, freeform shape. By right-mouseclick I can edit the shape nodes. If i drag one of the nodes of the square to another position and click outside of the shape, the new shape is updated. Right, on that moment i would like to trigger my macro to recalculate the area.

Is there an event in excel to aim for, like the Worksheet.change-event or something similar?

View 2 Replies View Related

Macro That Removes Numbers Leaving Text

Dec 28, 2005

Macro that will strip out all the numbers in 1 particular cell column and and leave the text.

View 9 Replies View Related

Find/replace Leaving Numbers As Text

May 10, 2007

I have a column of invoice numbers, formatted as text, some of which have first character "0" & last character "C" e.g. "012345C". I want to get rid of the "C" leaving e.g. "012345".

I have tried Find "C" / Replace " " with the undesirable result being that the leading "0" disappears too. Find "5C" replace "5" gives the same.

View 7 Replies View Related

Save Copy Of Workbook, Leaving 1 Sheet Only

Sep 11, 2007

I have a workbook that has worksheet called "Data". In that workbook, there is some codes for the event of "workbook_beforeprint". My question is whether i could create a copy of the "master" workbook and delete all the unwanted sheets but "Data" sheet using VBA. There are some codes of creating a new workbook but i suppose i need to the exact copy of the current workbook using VB

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved