I would like to add a "subroutine" to my macro to show the numbers it is picking. But I am having a problem figuring out how to do this.. Here is my macro...
Sub generatelottery2()
Const l& = 1 'lower value
Const u& = 49 'upper value
Const n& = 6 'number of numbers per draw
[Code]....
I know this problem has been answered before, but my browser is giving me hell when I try to use the search function, so here I am clogging up the post forum.
I would like to be able to access one of the subroutine functions built into the Analyis Toolpack add-in. Using the macro-recorder, here's what I came up with:
Application.Run "ATPVBAEN.XLA!Random", ActiveSheet.Range("$F$23"), 1, _
15600, 7, , ActiveSheet.Range("$A$3:$B$12")
I get a run-time error 1004 when executing stating that "ATPVBAEN.XLA Could Not Be Found". I'm sure this has to do with they improper way in which I'm trying to call this function.
I have a column of times: e.g. 10:03:00 and I would like to add them all up.
=A1+A2 works fine.
=sum(A1:A10) does not.
I want to add hours to a date-time cell to get result in date-time.
Format of cell A1 is d/m/yy h:mm AM/PM
Format of cell A2 is General
Format of cell A3 is d/m/yy h:mm AM/PM
I want to add A2 (number of hours) to A1 to give A3.
The formula I used is A3=A1+Time(A2,0,0)
The formula works perfectly fine when A2 is less than 24, but when A2 is more than 24, the date doesn't get changed.
I need a formula to add just the time to ' date and time', ignoring weekends.
eg:
Fri 24-Aug-07 10:52 is the date and time
28:48:00 is the time
If I add the time to 'date and time', result is coming as Sat 25-Aug-07 15:40
But it should come as Mon 27-Aug-07 15:40 (hence ignoring weekend)
I am replicating a Matlab program which calculates tide levels at different times of day. I need to replicate it in excel to speed up data analysis and I am nearly there.
what happens is I need to apply a time offset to the time of high tide at port a based on the time of day, so if it is:
between 00:00 and 06:00 the high tide at port b is 81.6 minutes after the peak at port a
between 06:00 and 12:00 the high tide at port b is 74.56 minutes after the peak at port a
between 12:00 and 18:00 the high tide at port b is 81.75 minutes after the peak at port a
between 06:00 and 12:00 the high tide at port b is 79minutes after the peak at port a
I tried this formula, where CO2 has the time/date of the high tide at port a:
=IF(CO2<0.75,IF(CO2<0.5,IF(CO2<0.25,CL2+(81.6/(24*60)),CL2+(74.56/24*60)),CL2+(81.75/(24*60))),CL2+(79/(24*60)))
The problem is the high tide on 07/01/2005 07:45 is read as 38359.32 rather than 0.32 - is there any easy way to tell excel I'm only interested in the time not the date? I have this spreadsheet setup now to do all the other bits required and i is just the timing that is a problem.
I want to run through a loop to make it look as if my graph is animated. But the loop is too fast.
How can I slow down the loop to 1/10 of a second per calculation?
If the below formula is activated - e.g. something is put into cell f8 or g8, the I get the word calculate in the bottom left hand size of the s/sheet.
View 4 Replies View RelatedI have a spreadsheet that has 1800 sumproduct formulas in it. Foe each day of the year it counts or sums 5 things. Each of these things has 2-3 criteria that is why I used sumproduct. The database it counts from is on the same sheet. It takes to long for the sheet to calculate. Is there a better way. I am using Excel 2003. The sheet itself is not huge 913 kb.
View 9 Replies View RelatedI would like to make a file that can calculate the quantity that need for the bakery shop, it's just my example. The customers can order the number of layers of the cake and that is related to the quantity from the table. I would like to looking for the 3 ingredients and the quantity in grams, and afterwards create a pivot table to sum by each type of the ingredients. The orders is about 3000 rows and ingredients are about 20 columns, If I use IF() and Vlookup() or put in Array formula, my program will be very very slow. Can I use others function to get the ingredients and the quantities? I have attached the file belows.
Please also make some suggestion, or something to read more, about the way I use the funtion like I use IF()+IF() or IF()&IF() instead of IF(,,IF). Does it make any different?
I have 2 sheets in a workbook
My VBA code gets data from a cell in sheet1 Then it paste that into a cell on sheet2 sheet 2 processes some data and produces a single cell result based on the pasted data Then that single cell result is pasted back into sheet1
Here is the problem. Sheet 2 takes a up to one second to produce the final result because it has to fetch some data from the web My code is pasting data back to sheet1 before sheet2 has had time to produce a final result
How can I make sure the data is finished on sheet2 before my code paste the result back to sheet1?
The variable MacdBlack is the being pasted back to sheet1 before sheet2 has had time to update it This is because sheet2 has to get data from the web which is slow
VB:
Sub SheetTest()
Dim x As Integer
Dim StartCell1 As String
[Code]....
My spreadsheet has a sheet1 with 1000 rows and needs four columns with "sumproduct" formulas referencing sheet2 with 20000 rows. An example of the formula is:
=SUMPRODUCT(--(Sheet2!$F$2:$F$20000=$B3),--(Sheet2$A$2:$A$20000 >=$J$2))
Once I add them, the recalculation slows it to a crawl. In trying to understand the problem, I do a Manual/Automatic between running a sort. The recalculation still takes too long to be practical.
I am doing a report which analyzes a specific person's transaction per country (3 criterias). The workbook has 3 sheets. First sheet is the database, 2nd is the report itself and 3rd is a reference table. I am using a sumproduct formula to count per person's transaction per country. It is giving me slow calculations.
I cannot possibly use a pivot table since there will still be other calculations involved after determining the transactions. I tried using database functions but i can't seem to understand how to go about it when there are multiple criterias involved.
I am attaching a sample file for your reference.
I have a started time of say 8am from cell B3. I want to know what time it will be when I add a full number (hours) from another cell. For example A3+B4 where A3 is 8:00 A.M. and B4 is 4.04. I'm looking to get the a result of 12:04 P.M.
View 4 Replies View RelatedI have had a workbook that I have been using to track inventory. I use a userform to enter the data for inventory in and out of the system. I recently added two more worksheets to the workbook, each of which has several SUMPRODUCT formulas on them that reference the inventory data.
Since adding these two sheets, when entering data via the userform, it takes a long time (relatively speaking) for the sheet to update with the relevant new data. I have attached a copy of the file, in hopes that someone can show me exactly what is causing the slow-down, and if there is a way that I can get the same results using different programming or formulas that will not be so slow.
The part that is slow is on the "Data" sheet. Click on the green or orange buttons to open the userform. Make a selection in each section, and enter an amount. Clicking on "Enter" will transfer the appropriate information to the worksheet. This is the part that is slow.
I have the following formula in a cell:
=SUM(OFFSET(INDEX(J:J,MATCH(9.99999999999999E+307,J:J)),0,0,-M9))/M9
When the workbook with this formula is open it slows down other workbooks quite a bit.
If I run code in another workbook without the workbook with the formula open, calculation takes 0.099 seconds. If the workbook with the formula is open, the same code takes 2.24 seconds.
How could I change/replace above formula to average the last n (cell M9 value) cells in an ever changing column.
I have read alot of the online instruction on how to correct what i am doing, and its not working!!!! Im getting so frustrated. I have a column of time in hh:mm format. There are 130 entries that i need added. The sum keeps coming up as 19:44 which i KNOW is incorrect because when i review the hours alone they are more then that. How does excel handle, lets say 01:54 +00:58.
View 9 Replies View RelatedI want to add two times together.
14:00 (time) + 03:42 (duration) = 17:42
Is there vba code to be able to do this or an excel function?
I have tried searching but strangely couldnt find anything?
I have a start time in cell A1 (say 9am entered as 900), cell B1 has a time interval (25min), Cell C1 gives total (925). Cell B2 has the next time interval (56min). How do I get cell C2 to give total of 1021 rather than 981? Values in columns B and C continue on down.
View 3 Replies View RelatedI have the formula in my spreadsheet to compute time. It works only if the time in B1 is greater then the time in A1. I would to know if there is a formula to compute time with either negative or postive answer. For example if a carrier was set to load their papers at 12:02pm and ended up loading early at 11:50am I would like the result in C1 to be -12 or (12).
Currently I am using the formula: =HOUR(B1-A1)*6+MINUTE(B1-A1). Like I said, it is all good until someone loads early and then I get a "#NUM!"
Are there any other formula's that I can use or is there a simple modification to the formula I am using?
I have data that is exported to an excel spreadsheet from the phone switch for Average ACD time and Average ACW. Example: one cell is value :07:01 and and the next is :00:42.
I want to add the two together to get :07:43 or 07:43 for AHT. I have tried formatting the cell with custom time and time formats, but I get #Value. I believe the ":" at the beginning is not recognized. What formula can I used to get the two cells to sum?
I'll admit that the database I'm currently working on is not a vital on - it's my CD collection but I do use it as a testbed for spreadsheets at work so please bear with me!
I'm trying to add running times of CDs together, but of course can't simply use SUM as it will assume the values are base 10
I've got some extra columns in to separate the minutes and seconds, then for totals to divide the seconds by 60, add the result to the total minutes and finally add the remainder of seconds to this but........
is it possible format a cell so it won't allow erroneous time entries (ie, if I tried to put in 45:65 it would reject it?)
1) I am trying to find a way to add together the total number of hours worked from shift start time to the end of the shift start time throughout the week.
2) Add together the total number of hours travelled. again from the start and end times throughout the week...(presumably, if I solve the first problem, it in itself will provide the second solution.!! (Grin)
Where shift start and end times are concerned, the cells are formatted as time, but I want the sheet to produce the results of the total number of hours worked, so that I may cost the hours and make payment. Ie: 62 hours worked = £ at such and such a rate, and 25hrs travel paid at £ different rate.
I need to add times of employess over a 2 week schedule.I have used a string variable to select the rows and columns as employees change.How do i add the times in this case.Sample code is below:
j = 12
k = 20
For i = 16 To 276
row_str = "A" & i & ":B" & i
Windows("TimeSheet.xls").Activate
Range(row_str).Select
Application.CutCopyMode = False
Selection.Copy
Windows("Report.xls").Activate ...................
I am importing from another program into Excel. Anytime I have a time in a column with a 0 in the 2nd hour place it will not add that time in. Example (05:21:32)
A1 10:20:12
A2 05:12:15
A3 10:15:12
Total= 20:35:24
How can I get excel to recognize a time in this format with a zero (05:34:23)?
I'm pasting data from an external source into Excel. The data is in hh:mm:ss format. However, when the source data has zero hours it only displays minutes and seconds preceded by a colon. For example, 5 cells of data in a column might look like this:
:29:28
:31:50
1:15:17
:05:47
1:19:36
I need to run simple calculations on these times, but the cells without an hours value paste into Excel as text format. What are some ways to add a zero before the colon in Excel?
I have four columns. In the first one I want to keep my START time (in format of military time), in the second column I have STOP time, in the THIRD column I have TIME USED in other words it is a DIFFERENCE between STOP and START and I used this formula for that: =B2-A2 and it works.
Now in the FOURTH column I wish to have the TOTAL TIME added from the THIRD column and this where the problems starts. I used this formula =SUM(C2:C500) and doesn't work correctly.
Let's say I have the following data: ....
In one of the spreadsheets there is a need to have a 'action at' field.
This is the next five minute time slot between 5 and 10 minutes in the future (eg 10.51 -> 11.00 , 1.56 ->2.05 etc)
If i have a start time of 5:00 am and a finishing time of 4:25 pm, what function do i use to get the total time of 11 hours & 25 minutes?
View 10 Replies View RelatedFrom an outside source, a date is brought into one cell, and time is brought into another. Is there a way to combine them into one cell with the format of m/d/yyyy h:mm?
I tried concatenate, but that did not work.