I want to know the count of “s”, falling in a range of dates back (i.e.’7-12 mos. back, 4-6 mos. back, etc), preferably based on date modified.
Status Date Sold
A
S 11/1/2008
S 8/29/2008
A
S 7/12/2008
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I'm preparing Quarterly Evaluations, and am having an issue because an Analyst has superseded an overall percentage goal. In the attached example, it is the overall evaluation with the 'problem data' in red D19 and highlighted.
I'd like to add a condition that limits the points in D19 for 'responsibility 3' to 150.
=IF(ISERROR(C19/B19)*(B10),"-",(C19/B19)*(B10))
*just a note for clarification, the other two responsibilities are a 'per hour' weekly goal, whereas the 3rd is an overall personal effort divided from the overall team effort.
I have attached excel with the logic I am using, but I have a problem and needed logic to update to make sure it is not inserting same data (duplicate data).
Please update the logic so that if it is having same data in sheet 3 it should not insert or delete duplicate.
Code:
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 9), bi1 As Byte, vData1(1 To 9), bi2 As Byte, vData2(1 To 9), bi3 As Byte, vData3(1 To 9), bi4 As Byte, vData4(1 To 9)
Set ws = Sheets("Sheet2")
For bi = 1 To 9
[Code] .........
I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
View 6 Replies View RelatedThis task joins a string together based on a number of characters per cell in the range.
I want to isolate one range, Col N, and add an IF condition to it.
There may be other issues preventing this from happening, e.g. the number of IF that exist in the complete formula. I will isolate the current cell and its requirements and then post the entire formula at the end for reference....
I have date in column D and have a formula of
View 5 Replies View RelatedI copied this snippet from the net and it has been working like a charm. I would like to add DateLastModified to it, but I can't get it to work, I'm still kind of new to more complex VBA codes. Here is the code...
Code:
Private Sub CommandButton1_Click()
Dim cell As Range
Dim selcell As Range
Dim Value As String
Dim Folder As Variant
Dim a As Long
ReDim Folders(0)
Set cell = Range("B8")
[Code] .........
Trying to create a macro that will add the date & time & initials (i.e 8/26/09 2:34 PM JOD) into the current cell.
I've found plenty of macro's that will do this but it ends up deleting any existing text within the cell. I need to be able to add it in the middle of a text string.
adding an second range (J1089:AI1147) to the follwing code.
Code:
Sub Clear_Range()
Application.EnableEvents = False
With Range("H3:AL1058")
[Code]....
I need a script that will search through a selected range of cells and add a simple IF statement.
For simplicity, lets assume the desired range is Q36:Q40. (The range is much larger than that.)
The existing formula is:=IF($Z37="%Sales",Q$9*$Y37,IF($Z37="%BS",Q$78*$Y37,IF($Z37="%YOY",O37*(1+$Y37))))
I would like to keep all existing forumulas, just tack on an IF statement before hand that says if a certain cell (Q2) reads "CoPrep" then do nothing, otherwise use the existing formula. I envision this as =IF(Q2="CoPrep","",IF($Z37="%Sales",Q$9*$Y37,IF($Z37="%BS",Q$78*$Y37,IF($Z37="%YOY",O37*(1+$Y37)))))
FYI, the background to this problem is that I am in the process of making a financial forecasting model that allows for choices of company prepared forecasts, hence "CoPrep", or model forecasts based off of other critera, both of which can be sensitized.
Matching criteria from a Virtual ( Non-Existing Range)
I need help on two things:
1> Virtual Range
2> Displaying TRUE or FALSE
I want to perform a Lookup Using the Regular Match Function with the following Syntax for checking Dates falling in a Fixed Range...
I have a named range "ABC", range is ("A1", "A3", "A5"). Now I need to use Macro to extend the range to ("A1", "A3", "A5", "A7"), that is, adding "A7" to the existing named range "ABC".
View 1 Replies View RelatedMy problem may seem similar to "conditional sumif", but I could not solve it with that approach. The examples of sumif or sumproduct always use
E2:E25="Low"
notation, in my case I need a range on the right hand side of that comparison. I have several brands which belong to some producers. I'd like to sum the values of all brands belonging to 1 producer. The brands and their producers are listed on the same sheet. An example is attached.
how do i go about creating a macro to copy a range in sheet 1 in workbook A and paste that to a new tab(the last one) in the existing workbook B. i would like the tab to be renamed based on a cell value. preferably workbook B doesnt have to be open, and the save and close it
View 6 Replies View RelatedI have created 500+ defined names that refer to worksheets that do not exist (yet). When I add the previously nonexistent worksheets, the defined names that refer to them are not "live" and do not work in functions where that name is used. If you go into the defined names and click on the ones that refer to the now existent worksheet, they start to work, but I was hoping there was a way around this step (e.g. a simple macro that says "update all defined names").
I created all the names so that the person who will eventually be using this will only have to add an appropriately named worksheet and put the data in...then everything will automatically work. I do not think adding names is difficult, but the person who will be using this does, so I want to avoid that person mucking around in my names.
I have two columns with two sets of dates which are nothing but durations of leaves.
Col 1 has start dates and
Col 2 has end dates
Start Date End Date
25 Jul 2012 5 Aug 2012
2 Aug 2012 8 Aug 2012
If I want to calculate difference between the two dates such that if a leave starts in July and Ends in Aug, then I want the result to be only the count of leave days in August. How can this be achieved?
i have in a
sheet1: those field below-->
STATUS DATE
ok8-Aug-07
ok8-Aug-07
ko8-Aug-07
ko8-Aug-07
ko8-Aug-07
ok8-Aug-07
ok8-Aug-07
i have to do some calculation in another sheet2:
if date = today count the number of ok else count the number of KO
I have this problem on putting the right formula. Column A entry are dates corresponding to replacement of parts x at column B with running hours of parts x at column c respectively. the table will look more like this:
A B C D
1 jan 2, 2008 brake front 200 ?
2 jan 20 , 2008 clutch 150
3 jan 30, 2008 wheel front left 300
4 feb 2, 2008 brake front 50
5 feb 5, 2008 brake left 85
6 feb 15, 2008 clutch 300
the formula will first look at column B and look for the entry "brake front" and every time it matches the entry it then looks up the date and then displays the corresponding latest running hour value on column C at cell D1. D1 formula will be having a result of 50 as it is the latest running hour value compared to 200.
Column 1: Date Call is received by helpdesk
Column 2: Time Call is received by helpdesk
Column 3: Drop-down list indicating Priority of call (High,Medium,Low)
In Column 4 I want to enter a formula that adds working hours only to the date and time entered in Columns 1 & 2. The time added will vary depending on what is entered in Column 3 (e.g.: if priority is High add 1 hour, Medium add 2 hours, Low add 3 hours). The working hours i need to adhere to are 09:00-17:00, Monday-Friday.
I have a spreadsheet with about 225 sheets or so containing data. The date is in column J. I am needing to delete all the Rows that have a date greater than or equal to 06/06/08 and loop through all of the sheets.
I recorded a macro to find the date 6/6/2008, then highlight the row, then select the next 450 rows and delete them and it worked ok, but I don't know how to get it to loop through the sheets to the end.
with the formula below..
=SUM((Sheet2!A$4:$A$17475=AM2918)*(Sheet2!B$4:$B$17475=AN2918)
*(Sheet2!H$4:$H$17475="Left")*(Sheet2!$E$4:$E$17475>=AR2918)*(Sheet2!$E$4:$E$17475)
I've done this before but can't remember how I did it:
1BCDEFGH21234533red92701131096601005096604green20070582305250044940472805
blue0355203912033930389706bpink51059230632205352061280789-In column H,
I want to sum only rows that are less than or equal to cell H2.....
I want to find the most recent date in column D, when the variables in column E are all the same. There are many different variables in column E, and for each group of the same variables (eg. all cells containing "A"), I want to find which is most recently dated (dates are in column D). This is my code so far...
Sub adddiv()
Dim ticker As Variant
Dim freq As Long
Dim csheet As Worksheet
Set csheet = Worksheets("Sheet2")
[Code] ....
Excel Version : MS Excel 2010
Attachment filename : <Forum to plot the values.xls>
My requirement is i want to plot the values V1, V2, V3 and V4 from the given condition (A1 / A2 / A3 / A4) and the given date.
If the given date is not available then the formula should take the older date than it not next date. For example if the given date is 10-Mar-14 and the date is not available for the given condition then it should take the older / earlier dates like 09-Mar-14 or 08-Mar-14 like and it should not take 11-Mar-14, 12-Mar-14.
The values should be plotted in the yellow cells.
formula that will compute contract amounts that are paying out for a given month, depending on what is listed as the contract renew date and how often the contract renews.
Assume the contract date is in C1, contract renew date is in C2, Contract term is a drop down menu in C3 that has two options of text, 6 Months or 12 Months. C4 gives the contract amount. There are then dollar amounts in C5 and C6 that are only taken into consideration if they are $0.00. In B1 will be the run date or the date I want to pull my info for.
I basically need a formula in C7 that will return the contract amount from C4 taking into account these conditions: If there is a dollar amount in either C5 or C6, return "$0.00" in C7. But if C5 and C6 are both zero, than: If C3 = "12 Months" and B1 is in the same month as C2 (I don't want it to take into account the year of day of the date), than return the amount listed in C4 in cell C7. Or if C3 = "6 Months", and B1 is in the same month as C2 or if B1 is 6 months ahead of the month listed in C2 (again not taking into account the day or year), than return the amount in C4 in cell C7. So basically if the contract amount in C4 was $100, and B1 3/1/2014 and the contract renew date is C2 is 9/15/2013, I still want $100 to appear in C7, even though there is only technically 5 and a half months in between the dates of 9/15/2013 and 3/1/2014. I want it to look at these dates and add six months to the month of September and then look at cell B1 and as long as that date is a date in March, return the contract amount in cell C7. I also want $100 to appear in C7 if the date in B1 was a September date. In the situation where C3 is set to 12 months, if C2 is a September date than $100 will only appear in C7 if B1 is also a September date.
And one last thing, I'm going to somewhat withdraw my request that the year shouldn't be taken into account. This is only partially true. It just occurred to me that the $100 should only appear provided the date in B1 is in the same year or in a subsequent year AFTER the year of the contract renew date in C2. So for instance if, C2 is 9/15/2013 and I put in 03/01/2013 in B1, it should NOT calculate the $100 in C7 since the contract technically would not have renewed in March of '13 as it didn't exist until Sept of '13.
I have a column of over 20,000 rows, showing employee hire dates. For the purposes of a specific calculation, I want to replace all the hire dates that are prior to 1/1/2011 with 1/1/2011. Is there a simple way to do this all at once with a Replace statement in my code without having to look at each record individually?
I know how to replace one specific date with another all at once, but I don't know to do it when I'm looking for more than one specific date.
Two Sheets:
1) Top Sheet
2) IRA
- Cells A4:A10 of sheet "Top Sheet" contain dates. i want B4:B10 to show the IRA value as of the date in column A:
____A__________|_B______________________
4 | 09/22/2005 | $ Total as of date in A4
5 | 10/06/2005 | $Total as of date in A5
6 | 10/20/2005 | $Total as of date in A6
7 | 11/03/2005 | $Total as of date in A7
8 | 11/17/2005 | $Total as of date in A8
9 | 12/01/2005 | $Total as of date in A9
10| 12/15/2005 | $Total as of date in A10
- Cells A6:A12 of sheet 'IRA' also contain dates but not in the same sequence (some date ranges had several transactions), B6:B12 of sheet 'IRA' contains the transaction values during the date range:
____A__________|_B______________________
6 | 09/22/2005 | $100
7 | _ _ _ _ _ _| $200.................................
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedSet Rng = WS1.Range("C10:C8000")
i need to set the Rng where column AM, from cell 10 to the and of list, contain the string "85", is possible without to loop all value in sheets column AM?
