I am trying to get some help by adjusting my datarange dynamically based on what days I select. I would hope the chart could adjust to display for example 10/3/2008 to 10/10/2008 values and only those values.
I have been trying to figure out how the datarange varies in this post Dynamic Chart dataranges, I do not understand how to apply them to the charts source data. Ultimately Krish's chart would be ideal to understand and I belive is the keystone to where I am trying to go.
I have attached a sample of my workbook and the source data and chart I am trying to manipulate.
I have various charts others view and require the data range to change in 12 month intervals, ie Jan07 -Jan08, Feb07-Feb08. I currently move the ranges manually every month but find the it would be more interactive for others if a drop down combo box on the chart were used enabling the user to choose which intervals to view.
Refer to enclosed excel file, I have drew a chart base on the data in side. However, for the last column which is "SG Productivity(KUSD)", The column very small even cannot be seen, is there any way can enlarge columns in this field without changing other column? T
Is there a way to make a chart adjust automatically when you add to the source data? I'm trying to use a named range in order to power a chart (something like chart_data=offset(a1,,, counta(a:a),counta(1:1)); the range is working fine). When I put "chart_data" into the source field for the chart, it seems to work fine; it picks up the right range... But when I later add more data, the chart source data field seems to have converted my named range into a hard-coded range, absolute range. So the dynamical named range updates, but the chart doesn't and I don't see the new data. Am I doing something wrong that I need to tweak? Does what I'm trying to do just not work? Is there another way to make the chart pick up the new data without adjusting the range?
Negative or zero values cannot be plotted on log charts!!
Some of my log charts will have negative or zero values at certain input variable combinations, however, I'm obviously not interested in those charts when this is the case.
I have a general list from which a chart is created. Column one contains a date series. There are a fixed number of dates in this series (approx 50 or so).
I would like to select a start date and an end date from this list and have the chart display the data from that range.
Typically I would simply create a new list and build the chart from the list, but I'm kind of hoping that I could do it from a single source rather than make mulitple lists.
I have a worksheet with 500 rows. Coulmn A is all the dates of the items. Is it possible to somehow havea userform or something that I input a start date and a finish date and it only shows me that info.?
I have this VBA (from a recorded macro) how can I amend it so that these two formulas change depending on the number of values....right now the range is to 129 only because we only have 129 cells of info but some sheets will have more some will have less. I want excel to base it based on the column I which used to be H.
VB: Sub SLCREPORTDATA() Cells.Select Range("F1").Activate Cells.EntireColumn.AutoFit Columns("H:H").Select
I know there is a way to make a range adjust as you add or remove row. I just can seam to remember how to do it .I am using a countif function and later I will be adding more rows I want the countif to look at everything
I've managed to piece together a VBA code that works perfectly for my needs. The problem is that the sheet it is on gets adjusted a lot, and I only need the code to run when certain cells are changed (rather than each time any cell is changed).
Here is the code I have now:
[Code] .....
Put simply, I need this code to run only when a cell in Range "TValueDeal" is changed. Is making this adjustment as simple as adding a couple lines of code, or is there a better way to write the entire thing?
the dynamic name ranges I had created did not "adjust" in their position references when I added new name ranges later.
My workbook (see attachment) Master sheet has several name ranges that are based on their position to a key name range I set up..."Unit". Example below:
I have a system that generates 4 databases with different types of statistical data. Observed defects, Calculated Defect, Capability and Number of points. I have set up a system for telling me what ranges each section is and I am manually changing the ranges to get my expected results.
Is there a formula that I can use that could adjust my ranges, within my formulas?
The below formula is in Col F6, how do i get this formula to adjust to data range without manually filling down, my data changes everyday therefore i need the formula to auto fill according to data range.
I have an employee expense voucher with a column that calculates mileage. I also have a column that lists what the mileage rate is. I'd like for that column to adjust based on the date of the transaction/trip.
Here's an example. Trip between 7/1/08 - 12/31/08 = .585 mileage. Trip between 1/1/09 - 12/31/09 = .405 mileage. If someone turns in a receipt for a trip taken on 11/13/08, I want the form to adjust the mileage rate to .585. Wasn't sure if this is an indexing kind of thing, or if there's an if statement I could use.
How or if it is even possible to have a table automatically adjust its range or the number or rows it has based on another table
I have two tables:
Table1 is raw data that is added two daily
Table2 has formulas with column header references to Table1 that processes the information and converts it to a readable format. (basically barcodes to words)
Is there a way to get Table2 to automatically resize to the same number of rows that Table1 has whenever data is added??
Attached is a spreadsheet I am working on that has a series of graphs with defined dynamic ranges. I am having 2 separate issues on 2 different tabs.
1) Ranges named AirRecBra4 (and Bra10); AirComBra4 (and Bra10); AirRemBra4 (and Bra10) are not pulling in data from the correct data points. Instead of using the last 26 data point, they are currently beginning at the top of the column (currently cells 11 to 36 is their respective columns). The formulas are copy and pasted from working offset ranges in the same tab but are reading differently.
2) On the last 6 tabs beginning with Stn Backlog, I want to have defined formulas beginning in cell B119 and continuing downward to at least F200. However, when I add the formulas, the offset reads the formulas as being data and adjusts for that. I do not know how to adjust the dynamic range to ignore formulas in blank cells.
Global Demand-Capacity Management_working (version 3).xlsm
I'm using a template that has formulas using a $ sign to attempt to stop the ranges they refer to changing. The problem is, when I use the template (which involes Access importing some data and adding columns to the sheet the formula refers to in the process) the rows referred to in the formula change in line with the number of rows of data that have been imported. Only the row numbers change not the column headings. So for example:
Its fine but if i insert a new row or column then it mucks the whole thing up. Is there away of naming them but if any cells, row or columns are inserted the range will automatically adjust to suit1
I have the code below that is two separate activities and I want to change the second activity from a cell trigger (Set KeyCells = Range("K42:AD42")) to a button trigger. I need to first to remain unchanged.
I'd be ok if this was just one macro that I could assign to a button but because its two and I need to write the second's to clicking a button I'm over my head.
Its occured to me while writing this that because it'll be a range of buttons I'll probably need to make each one an individual code? Is this the case? If so I may have to just keep this as it is.
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
I have a employee travel spreadsheet with air travel dates in two columns. I want to be able to create a rule that will highlight all the cells in a row if the date range on that row fall includes today's date. if someone is traveling in the event there is an emergency and I need to know if they are traveling that particular day. I have attached a sample spreadsheet.
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I am trying to format the date in my x-axis which is currently 'month-day-year' but I would llike it to be 'month-year' I know it is because my data that was used for the date is 'month-day-year' but since I am using power pivot I can not change the data. Is there a way I can change it to my desired format so that my pivot chart will only have the 'month-year' format in the x-axis?
I'm using Excel 2007 and I want to plot data vs dates. Furthermore I want the dates on the dates axis to increment by month not by a certain number of days. So something like this:
1-Jan-09 1-Feb-09 1-Mar-09 ...
There's the Major/Minor Units on the Axis Options screen but I cannot type in a constant number since the number of days for each month is different.
