the dynamic name ranges I had created did not "adjust" in their position references when I added new name ranges later.
My workbook (see attachment) Master sheet has several name ranges that are based on their position to a key name range I set up..."Unit". Example below:
"Unit"
Range("B25").Name = "EndMull"
Its fine but if i insert a new row or column then it mucks the whole thing up. Is there away of naming them but if any cells, row or columns are inserted the range will automatically adjust to suit1
Attached is a spreadsheet I am working on that has a series of graphs with defined dynamic ranges. I am having 2 separate issues on 2 different tabs.
1) Ranges named AirRecBra4 (and Bra10); AirComBra4 (and Bra10); AirRemBra4 (and Bra10) are not pulling in data from the correct data points. Instead of using the last 26 data point, they are currently beginning at the top of the column (currently cells 11 to 36 is their respective columns). The formulas are copy and pasted from working offset ranges in the same tab but are reading differently.
2) On the last 6 tabs beginning with Stn Backlog, I want to have defined formulas beginning in cell B119 and continuing downward to at least F200. However, when I add the formulas, the offset reads the formulas as being data and adjusts for that. I do not know how to adjust the dynamic range to ignore formulas in blank cells.
Global Demand-Capacity Management_working (version 3).xlsm
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I have an worksheet that I import a csv into, each day a new csv is added to the bottom of the previous csv data. I have some code that extracts the date and month # from the cell and places them in helper columns. The code find the last used cell in the helper column and the imported data column to find the first and last row of the new day.
This part works fine. However, I assigned a variable name to the first and last variables and would like to uses these row number to define a range in order to use the range for a vlookup or find operation. This is where I get stuck. I want to use column x and row (variable from first bit of code) to column y and row (variable from first bit of code). Then use a vlookup/find whatever works to find the text I need and get the data. Tips on looping the code would be welcome as well.
I have searched for answers to the problem, on the board and web, but have not found a solution that works for me. (at least that I could get to work!!)
Below is the code as I have it
Public Sub Enter_Date()
Dim DateA As Date
Dim DateB As Date
Dim Cnt As Integer
Dim End_of, Beg_of As Integer
Dim Count As Integer
Dim NumtoFill As Integer
I need to have a conditional format that will adjust based on percentage ranges.
1% to 25% would be shaded red
26% to 50% would be shaded Orange
51% to 100% would be shaded Green
I was hoping to reference another cell and have the formatted cell reflect the conditional format. I dont think that's possible, so I can include a percentage in another cell and have that highlighted.
Is there a way to make a chart adjust automatically when you add to the source data? I'm trying to use a named range in order to power a chart (something like chart_data=offset(a1,,, counta(a:a),counta(1:1)); the range is working fine). When I put "chart_data" into the source field for the chart, it seems to work fine; it picks up the right range... But when I later add more data, the chart source data field seems to have converted my named range into a hard-coded range, absolute range. So the dynamical named range updates, but the chart doesn't and I don't see the new data. Am I doing something wrong that I need to tweak? Does what I'm trying to do just not work? Is there another way to make the chart pick up the new data without adjusting the range?
View 3 Replies View RelatedI would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies View Relateddefinitions for static ranges and dynamic ranges?
View 9 Replies View RelatedI am having some troubles inserting an image than centering it within the cell.
When I do this:
Set rng = Target.Cells
With pic
.Height = rng.Height
.Width = rng.Width
.Left = rng.Left
.Top = rng.Top
End With
The picture fits within the borders of the cell, but when I do this:
Set rng = Target.Cells
With pic
.Height = rng.Height /2
.Width = rng.Width /2
.Left = rng.Left /2
.Top = rng.Top /2
End With
The picture is the right size but not within the cell.
I have this VBA (from a recorded macro) how can I amend it so that these two formulas change depending on the number of values....right now the range is to 129 only because we only have 129 cells of info but some sheets will have more some will have less. I want excel to base it based on the column I which used to be H.
VB:
Sub SLCREPORTDATA()
Cells.Select
Range("F1").Activate
Cells.EntireColumn.AutoFit
Columns("H:H").Select
[Code]....
I know there is a way to make a range adjust as you add or remove row. I just can seam to remember how to do it .I am using a countif function and later I will be adding more rows I want the countif to look at everything
View 2 Replies View Relatedi want a code to adjust the column A:Y from width
View 9 Replies View RelatedI've managed to piece together a VBA code that works perfectly for my needs. The problem is that the sheet it is on gets adjusted a lot, and I only need the code to run when certain cells are changed (rather than each time any cell is changed).
Here is the code I have now:
[Code] .....
Put simply, I need this code to run only when a cell in Range "TValueDeal" is changed. Is making this adjustment as simple as adding a couple lines of code, or is there a better way to write the entire thing?
I have a system that generates 4 databases with different types of statistical data. Observed defects, Calculated Defect, Capability and Number of points. I have set up a system for telling me what ranges each section is and I am manually changing the ranges to get my expected results.
Is there a formula that I can use that could adjust my ranges, within my formulas?
The below formula is in Col F6, how do i get this formula to adjust to data range without manually filling down, my data changes everyday therefore i need the formula to auto fill according to data range.
=IF(ISBLANK(E6),"",Summary!$I$2-E6)
I am trying to get some help by adjusting my datarange dynamically based on what days I select. I would hope the chart could adjust to display for example 10/3/2008 to 10/10/2008 values and only those values.
I have been trying to figure out how the datarange varies in this post Dynamic Chart dataranges, I do not understand how to apply them to the charts source data. Ultimately Krish's chart would be ideal to understand and I belive is the keystone to where I am trying to go.
I have attached a sample of my workbook and the source data and chart I am trying to manipulate.
I have various charts others view and require the data range to change in 12 month intervals, ie Jan07 -Jan08, Feb07-Feb08. I currently move the ranges manually every month but find the it would be more interactive for others if a drop down combo box on the chart were used enabling the user to choose which intervals to view.
View 5 Replies View RelatedI want to create dependent lists using data validation. The lists need to be created from ranges that will be growing as users add more data. I think the best way to create the list is a VLOOKUP. However, I am not sure how to use the VLOOKUP when the range is changing.
I have attached an example. I have a list on sheet "Vlookup" called "FRUIT" with "apple", "orange", "banana". Then to make the depedent lists I have created three other lists called: "APPLE", "ORANGE", "BANANA". I want to pull the COST from sheet "VALUES" into the lists "APPLE", "ORANGE", "BANANA". Users will be adding costs next to the FRUIT they purchase.
I have a particular issue - i am trying to create a rolling correlation.
lets say you have two variables for 3 different months:
Month1 a x
Month2 b y
Month3 c z
correlation will correlate a-c with t-v
however, come next month - i have to manually drag the ranges for a rolling three month correlation:
Month1 a t
Month2 b u
Month3 c v
Month4 d w
correlation will now correlate b-d with u-w for a the last three months.
I want to automate this as I know what the month is, I can't seem to return the last three months and correlate the data.
I have tried to do this with the database functions, but I think that they break the array relationship of b-d and u-w in the correlation function.
In the example I have attached, I need 4 named, dynamic ranges to build a chart with:
1) Dates for the chart
always starting from A2 ... to whenever the LAST sum of B, C, D =0
(right now that would be A2:A30)
2) The Amounts
I need the amounts as 3 individual dynamic ranges, with no 0 values
(example - B2:B21, or c10:c14, etc)
3)The date column
same as #2, but just a single cell reference to show as a marker on the chart.
(example e21:e21)
I know someone here will think 'so what's the big deal' and pop it out in 30 seconds.
I'm trying to make ranges in a SumProduct formula dynamic, but getting errors #N/A. I think this is because the top two rows are headers, throwing off the range count.
Q. How do I adjust the range definition to compensate., e.g.
Range =Offset(Sheet1!$D$3,0,0,COUNT(Sheet1!$D:$D),1) where column D is numeric, and
Range = Offset(Sheet1!$T$3,0,0,Match("*",Sheet1!$T:$T,-1),1) where column T is text?
I had assumed that the offset value 3 would do this, but I suspect the functions count and match are not doing so.
I am trying to create a vlookup to get a count of trouble tickets techs completed daily within a table I created, I am using a table since its dynamic. For example I need to see how many tickets Joe completed in a day. See below...
Tech Ticket# Comments Status
Joe 1234 Replaced HD Closed
John 3212 Replace Motherboard Closed
Joe 5678 Installed OS Closed
Above is just an example (my table has 40 columns). I need to vlookup joe and get the count of the closed tickets.
So I was looking for reassurance or validation more than anything. From what I can tell you can in order to build a chart that is dynamic throughout a range, you use the offset and count or counta function - 1. That part isn't a problem. My question is once you created that for your charts do you just normally plot your chart range or do you have to reference the named range directly into the chart range?
View 2 Replies View RelatedI have monthly sales, and i wanna be able to sum the last-twelve month sales, when i select the month from a drop-down list. For example, when i select Feb14 from the drop-down, I want the formula to sum the sales between mar13-feb14. how can i accomplish that?
Select Month
Feb14
LTM Sales
?
[Code] ..........
Dynamic named ranges - lots of them! ...
View 9 Replies View RelatedI have a stock chart that I want to update dynamically if the data record length changes. From the source data menu, I tried to use the following data ranges:
=OFFSET(Candles!$AB$8,1,0,COUNTA($AB:$AB)) ---> Date, x values
=OFFSET(Candles!$AD$8,1,0,COUNTA($AD:$AD)) ---> High
=OFFSET(Candles!$AE$8,1,0,COUNTA($AE:$AE)) ---> Low
=OFFSET(Candles!$AF$8,1,0,COUNTA($AF:$AF)) ---> Close
When I place any of these in the data range box under 'x axis labels or values', I receive the message "This function is not valid".
The MS webpage at http://office.microsoft.com/en-us/ex...098011033.aspx describes using these formulas but they don't appear to work.
I am creating a consolidation worksheet. It contains a macro that automatically copy data from other sources and paste it into my DB sheet. It already works, but I want to improve it. The source worksheet databases has been defined with the name “SOURCE”. Is there any way that I can make my macro look for this dynamic ranges directly, copy and paste it into my DB sheet. I am attaching an example of what my current macro is doing.
View 2 Replies View RelatedI've got a spreadsheet that I download a list of information into. The information relates to activities that are taking place e.g. start time, end time, type of activity (e.g. meeting) and duration (which identifies the length of the activity in 30 min slots e.g. 9.30am - 11.30am = 4).
The rest of the columns are labelled to represent the time in 30 min slots starting from 9am. What I would like excel to be able to do is to identify the first cell in the range which would be the cell that represents the start time in the row. Then from this cell fill cells in the row up to the end time with something - it doesn't matter what as long as the cell can be differentiated from the other blank cells in the row.
I don't think that I've explained myself that well so I've attached the spreadsheet for you to look at.
I'm having a fit with this formula; maybe the gurus will show me what I'm doing wrong. I have a list of area numbers along with dollar amounts that go with these area numbers. I have created a named range named "Areas" and another one named "MO_PD".
At the bottom of the worksheet I am doing a recap that takes the area number and sums all the entries in the MO PD column. This approach has been done before with Thomach's help. I'm trying to mimic it, but it's not working for me.
NOTE - I know that I can get around this using a pivot table, but I would like to use this approach for now. I would at least like to know what I'm doing wrong. Also, I'm not totally sure if I did the dynamic named ranges correctly so that may need to be fixed.