The below formula is in Col F6, how do i get this formula to adjust to data range without manually filling down, my data changes everyday therefore i need the formula to auto fill according to data range.
=IF(ISBLANK(E6),"",Summary!$I$2-E6)
I have excel sheet it contains 200000 records.I want to delete records from 50000 to 200000.Is there any shortcut to delete data.
View 2 Replies View RelatedHow or if it is even possible to have a table automatically adjust its range or the number or rows it has based on another table
I have two tables:
Table1 is raw data that is added two daily
Table2 has formulas with column header references to Table1 that processes the information and converts it to a readable format. (basically barcodes to words)
Is there a way to get Table2 to automatically resize to the same number of rows that Table1 has whenever data is added??
I am trying to sum a dynamic range of values, clear the range (ie. clear the numbers on the spreadsheet), then place the sum of all the numbers in the last cell in the user selected range. (essentially adding all values selected, placing final sum in the last row of the range, and leaving no trace of performing the routine)
I want the range to be selected during the userform running (using showmodal = false). I can sum the selection and write the value to a cell, but I can NOT write the cell to the last value in the selection.
I have a vba script that matches a date on two sheets then copies a formula based on the location of the date, the problem I am having is how can I refer to the activecell and active column without typing them manually as the range will change each day. See vba script below:
VB:
Sub find_date()
Dim FindString As String
Dim Rng As Range
[Code]......
I have two sheets, a data sheet with all our customers by ref, name and spend; and a presentation sheet.
In the presentation sheet I want to display the ref, name and spend of the Top 50 customers by spend, price high to low.
The workaround:
Copy all data from data sheet, sequence top down by spend, manually delete all after 50.
My only issue is that each month the data sheet will update and I want the Top 50 to auto update, without performing the workaround above.
Is there a way to do this without VBA i.e. pivot tables etc
I have this VBA (from a recorded macro) how can I amend it so that these two formulas change depending on the number of values....right now the range is to 129 only because we only have 129 cells of info but some sheets will have more some will have less. I want excel to base it based on the column I which used to be H.
VB:
Sub SLCREPORTDATA()
Cells.Select
Range("F1").Activate
Cells.EntireColumn.AutoFit
Columns("H:H").Select
[Code]....
I know there is a way to make a range adjust as you add or remove row. I just can seam to remember how to do it .I am using a countif function and later I will be adding more rows I want the countif to look at everything
View 2 Replies View Relatedi want a code to adjust the column A:Y from width
View 9 Replies View RelatedI've managed to piece together a VBA code that works perfectly for my needs. The problem is that the sheet it is on gets adjusted a lot, and I only need the code to run when certain cells are changed (rather than each time any cell is changed).
Here is the code I have now:
[Code] .....
Put simply, I need this code to run only when a cell in Range "TValueDeal" is changed. Is making this adjustment as simple as adding a couple lines of code, or is there a better way to write the entire thing?
the dynamic name ranges I had created did not "adjust" in their position references when I added new name ranges later.
My workbook (see attachment) Master sheet has several name ranges that are based on their position to a key name range I set up..."Unit". Example below:
"Unit"
I have a system that generates 4 databases with different types of statistical data. Observed defects, Calculated Defect, Capability and Number of points. I have set up a system for telling me what ranges each section is and I am manually changing the ranges to get my expected results.
Is there a formula that I can use that could adjust my ranges, within my formulas?
I am trying to get some help by adjusting my datarange dynamically based on what days I select. I would hope the chart could adjust to display for example 10/3/2008 to 10/10/2008 values and only those values.
I have been trying to figure out how the datarange varies in this post Dynamic Chart dataranges, I do not understand how to apply them to the charts source data. Ultimately Krish's chart would be ideal to understand and I belive is the keystone to where I am trying to go.
I have attached a sample of my workbook and the source data and chart I am trying to manipulate.
I have various charts others view and require the data range to change in 12 month intervals, ie Jan07 -Jan08, Feb07-Feb08. I currently move the ranges manually every month but find the it would be more interactive for others if a drop down combo box on the chart were used enabling the user to choose which intervals to view.
View 5 Replies View RelatedI have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
View 4 Replies View RelatedI am trying to automate data import, instead of doing it manually all the time. I recorded a macro and now I am trying to edit it so that it can be used with any file.
Here's my code -
I have a quick question in relation to filling a range with an array.
When I use the following code:
Code:
Sub justdoit()
s = Array(1, 2, 3)
Range("A1:C1") = s
End Sub
It works fine. but when I try to populate the range in rows instead of colums, the array value stays as the first value.
Code:
Sub justdoit()
s = Array(1, 2, 3)
Range("A1:A3") = s
End Sub
I'm experimenting with arrays and would like to get better at them, but this has me stumped for the moment. How to get the values to work going down, like they do going across.
The above code is a small sample of data, I am wating to replicate with using over 80K lines and cell by cell is too slow.
Is there a way of filling a range of cells alphabetically?? Probably missing something obvious here!
View 5 Replies View RelatedAttached is a spreadsheet I am working on that has a series of graphs with defined dynamic ranges. I am having 2 separate issues on 2 different tabs.
1) Ranges named AirRecBra4 (and Bra10); AirComBra4 (and Bra10); AirRemBra4 (and Bra10) are not pulling in data from the correct data points. Instead of using the last 26 data point, they are currently beginning at the top of the column (currently cells 11 to 36 is their respective columns). The formulas are copy and pasted from working offset ranges in the same tab but are reading differently.
2) On the last 6 tabs beginning with Stn Backlog, I want to have defined formulas beginning in cell B119 and continuing downward to at least F200. However, when I add the formulas, the offset reads the formulas as being data and adjusts for that. I do not know how to adjust the dynamic range to ignore formulas in blank cells.
Global Demand-Capacity Management_working (version 3).xlsm
I'm using a template that has formulas using a $ sign to attempt to stop the ranges they refer to changing. The problem is, when I use the template (which involes Access importing some data and adding columns to the sheet the formula refers to in the process) the rows referred to in the formula change in line with the number of rows of data that have been imported. Only the row numbers change not the column headings. So for example:
=( SUMPRODUCT(((Workings!$H$3:$H$1000=Explanation!B9)+(Workings!$E$3:$E$1000="Buy")*(Workings!$J$3:$J$1000))))-998
becomes
=(SUMPRODUCT(((Workings!$H$511:$H$1508=Explanation!B10)+(Workings!$E$511:$E$1508="Buy")*(Workings!$J$511:$J$1508))))-998
I have been using Excel for several years and I'm fairly proficient at its basic functionality. I've recently learned and made extensive use of pivot tables. However, I have not taken advantage of such features as Data Validation, VBA, etc.
View 3 Replies View RelatedI am trying to declare a dynamic sized array. When the code runs, I get 2 errors:
Compile error, array already dimensioned (on the redim line)
when I remove the redim statement I get
error 9 - subscript out of range
I need to create this code to work in excel as well as an application running VBScript.
Dim myarray()
myarray(1) = "a"
myarray(2) = "b"
'etc...
Redim preserve myarray(UBound(myarray))
I am trying to replace blank cells in a range with the value a found cell. For example, in column A there are blank cells interspersed with cells that have "Account:" in them. For each row that has "Account:" there is a specific account number in column B.
A B
Row
1 Account: 234
2 gobbly
3 gook
4 Account: 456
5 stuff
I would like to fill the blank cells down with the appropriate number (A2 = 234, A3 = 234, A5 = 456). I've tried various integrations of the Fill Down with Macros code and Aaron's Find_Range code but haven't figured it out. The closest I've come is filling all the blanks with the first account number (A2 = A3 = A5 = 234).
Sub FillAccounts()
Dim rRange1 As Range, rRange2 As Range
Dim account As Range
Set rRange1 = Worksheets("test").Range("A2:b" & _
Worksheets("test").Range("b65536").End(xlUp).Row)
On Error Resume Next
Set rRange2 = rRange1.SpecialCells(xlCellTypeBlanks) ...................
I want to concatenate two Cells into a single cell BUT have the first field left justified and the second cell right adjusted.
A1 = "John Williams", A2= "Single"
A3 = "John Williams Single"
A lot of the Workbooks that I design for use by myself and colleagues require data to be copied in from external data sources. To avoid named ranges from failing, I always use the following method:
Calculate the length of the data set:
Code:
=COUNTA(INDIRECT("'Data Sheet'!"&"$A:$A"))
(There will be no gaps in the data, hence a count is fine.) This named range is called DSROWCOUNT.
Example named range for the data in column A:
Code:
=OFFSET(INDIRECT("'Data Sheet'!"&"$A$1"),1,0,DSROWCOUNT-1,1)
I use INDIRECT to ensure my named ranges do not fail if the data is deleted (accidentally or intentionally), as #REF! errors will occur.
The problem with this method is that it automatically makes the Workbooks volatile because of the use of OFFSET and INDIRECT, hence the Workbooks always needs to be in manual calculation mode to be usable.
I have a list of 800 fund names that can be any one of 6 types of funds. It is easy to filter the names using the filter function, but I cannot get it to be a filtered list for my dropdown box. The dropdown box should only list those fund names of funds that is of a certain kind. I know I am missing something small.
If the accompanying data is used as an example, I would like a dropdown box with the names of all the I funds.
I have a button event coded to select and ultimately fill a range of cells with the intent of representing a timeline of payment periods.
Private Sub Timeline_Click()
Dim x As Integer, y As Integer, cell As Range
x = 1
[Code]....
The first row needs to be filled with numbers from 1 to the value of [D20]; E.g. if D20=10 then there would be 10 columns selected then filled 1 through 10.The second row needs to be similarly filled with ascending Y values; E.g. D13 = 4, D20=8: row 2{.5,1.0,1.5...}
Range("B25").Name = "EndMull"
Its fine but if i insert a new row or column then it mucks the whole thing up. Is there away of naming them but if any cells, row or columns are inserted the range will automatically adjust to suit1
I have a table created in Excel 2010 by a SQL query. the query pulls 3 columns of data - Resource Name, Contract Company, Labor Category. I then add a column called "KEY". KEY is derived using VLOOKUP. VLOOKUP is matching the Contract Company from the table created with SQL to a table called "Rate Key" in another worksheet in the spreadsheet based on the matching the Contract Company. That all works fine. If the table changes due to changes in data coming from the SQL db, the column I've added using VLOOKUP recalculates correctly. Then I add 2 more columns. One is called RATE - which is a number that I manually type in. The last column is called RCode and is calculated by the RATE times the KEY. Whenever I refresh the SQL query, all of the the calculated rows work fine; however, the data in the RATE column that I manually enter does not move - it stays with the row regardless of whether or not the name changes when the new SQL data comes over. How do I get the values manually entered in the RATE column to move with the correct row when the rows change?
View 2 Replies View RelatedI have the following:
[C1] My dynamic email subject
[C5:C10] My dynamic email body message
My recipient is always same "burak@burak.com"
Now, I need a VBA code, that will automatically open a blank new outlook email window fill the fixed recepient fill the dynamic subject and body of the message from a range in my workbook.
Then just stop there so that I can attach some different files each time and send myself.
