Is there a way that I can tell my VBA code to select the first row that my advancedfilter is showing? The row number changes, depending on the criteria selected. I need to be able to select this row, so I can hide the first row the filter is showing. I tried an offset command, but that just selects one of the rows hidden by the filter.
View 9 RepliesI am trying to use the advanced filter code to move all unique items from one sheet to another sheet. For example, I have two sheets named (1) "data" and (2) "output". I want to filter a list of unique items only from the "data" sheet and copy the data to column A in the "output" sheet. The code posted works fine if I keep the unique data in the same sheet, but I can't figure out how to copy to the "output" sheet.
View 2 Replies View RelatedI'd like to say that this Forum is helping me very much when reading so many useful topics, get help from ppl here. From nothing I advanced my program very much. About my problem here:
I have an Excel Column with Dates (dd-mmmm-yy) and an UserForm/ComboBox. I'd like to add only the unique dates from the Excel Column to the ComboBox. The Excel Column Range is updating with new dates.
I tried to use RowSource but i don't know how to get the unique dates with RowSource. Maybe RowSource is not a good decision.
I need to transpose into 2x2 range to use as criteria for advanced filter
I tried
arrCrit = Array("Accnt_Nmbr", "313000", "DT", "RV")
Set rngCrit = wsData.Range("IU1:IV2")
rngCrit = WorksheetFunction.Transpose(arrCrit)
Where Accnt_Nmbr and DT are Column Headers in the data to to filtered
However when I run the output includes all DT's (Document Types)
How can I expand so both criteria are used in the filter?
is there any way to get an advanced filter to play with autofilters? at the moment after i have applied the advanced filter it completly messes up with my autofilter to the extent that it moves where the autofilter actually sits and then when i try and use the autofilter it completly ignores the advanced filter i just applied. how to make the 2 filters play nice together and actually be able to autofilter the results of an advanced filter.?
View 2 Replies View RelatedI have an auto filter setup on some data. When I perform an advanced filter either in-place or to another location, the auto filter disappears. Is it supposed to be have like that? If so is there some sort of work around?
View 2 Replies View RelatedI'm in the process of debugging some code at the moment and so have removed the On Error Resume Next's that I had in there.
I've since gotten rid of this where it wasn't necessary, but I have a general question about using the ShowAllData method with Advanced filter.
When I use:
ActiveSheet.ShowAllData
when there is no advanced filter applied, I get an error saying the method of Worksheet class failed.
I have searched and cannot find a way to check in VBA if there are advanced filters applied, though I can find code that will check if AutoFilters are applied. This doesn't work with AdvancedFilters.
I am trying to use the advanced filter with a not equal to operator, where the requirement is that the output not match an exact text string. I have tried <> and <>"???" (where ??? is the text string) and neither filter is working.
View 2 Replies View RelatedI realize that there are 100 posts asking this same question but I believe this question is unique. My actual data if far more complex, but I have attached a simple workbook to illustrate my problem. It is my understanding that the following code will generate a unique list of values. However, it does not work if an AdvancedFilter has been used previously in the code.
Sheets("Sheet1"). Range("B1:B6").AdvancedFilter _
Action:=xlFilterCopy, _
CopyToRange:=Sheets("Sheet2").Range("E1"), _
Unique:=True
I have been able to solve this problem by adding "CriteriaRange:=vbNullString" to the above code.
Sheets("Sheet1").Range("B1:B6").AdvancedFilter _
Action:=xlFilterCopy, _
CriteriaRange:=vbNullString, _
CopyToRange:=Sheets("Sheet3").Range("E1"), _
Unique:=True
Here is my question: Do you need to reset the value of "CriteriaRange" each time you use AdvancedFilter, and if so, is setting CriteriaRange to vbNullString the best way to do so.
I am using advanced filter. When I use
Range("S3").Value = "" = "M6" = """"""
I get a runtime error 13. Am I missing something? After reading through other posts, I could not find anything wrong with this.
I'm having with creating a macro to filter some data from one sheet to another. I used the "record a macro" function to get the code I've posted below but part of the code is always changing.
In my workbook I have a main sheet called "Data" and another sheet called "Parts". The code below does what I need it to do, but the problem is that the cell range (A2:I139) is not constant and may change depending on how many rows of information I import on the "Data" sheet.
What I'd like to have happen is either have a dialog box pop up and prompt me to select the cell range (I've tried using the Application.InputBox function but can't figure it out), or since the first cell will always be A2 and the last column will always be I, have excel automatically figure out the last row that contains data.
In Excel I recorded a macro by carrying out some operations and then copied the code into VBA code window to the click event of a button expecting the code would operate well but in vain. What is wrong with my operations? By cliking command button placed on a userform I want to copy the date of one column to another and the data thus copied into another column should contain only unique value.
View 4 Replies View RelatedI'm using this macro to retrieve data from a worksheet within the same workbook. As you can see, I've set the destination range between row 12 and row 20. The problem is this code clears all text (not other formatting) from row 12 down even farther than the row 800 that is the end of my Origin range. QUE: How do you limit the reach of the ClearContents code?
Origin Name Range Definition
= 'ORDERS 1st QTR 08'!$A$1:$J$800
Sub GetData()
Application. ScreenUpdating = False
Range("A12:J20").ClearContents
Range("Data_Table"). AdvancedFilter Action:=xlFilterCopy, CriteriaRange:= _
Range("M1:M2"), CopyToRange:=Range("A12"), Unique:=False
Application.ScreenUpdating = True
End Sub
I am trying to achieve the following and am not certain how to achieve this in Excel 2003.
1. make the Criteria Range Dynamic in Advance Excel, so that the Filter automatically updates on every Criteria change.
2. Raw Data range is kept in Closed workbook
3. Filtered Result displayed in another Workbook.
The data to be filtered is in several sheets, and once filtered is to be copied to a destination sheet (in this case "Temp"). The criteria for advanced filter is on an altogether different sheet (in this case "Reports"). The macro is actually simplified for the purpose of the question, and I want to re-use the code several times, hence the use of variable "filterRng". When I run it, I get the subject error at the bolded line in the code below. I'm thinking that the Advanced Filter doesn't like a variable as a range reference, as it runs perfectly well if the commented out line below the problem line is used instead.
Sub Test()
Dim i As Integer
Dim rngData As Range
Dim filterRng As Range
Set filterRng = Sheets("Reports").Range("A121:K124")
Application. ScreenUpdating = False
Application.DisplayAlerts = False
I'm trying to put a search userform in a worksheet. I got this code from the web and tried to alter it to fit my worksheet....
View 7 Replies View RelatedTrying to pass an array to a procedure to use as criteria in advanced filer.
My code below is raising this error:
Run-time error '1004':
The extract range has a missing or illegal field name
rngData. AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=rngCrit, CopyToRange:=rngDest, Unique:=False
Private Sub btnOK_Click()
Dim arrValues()
Dim lngI As Long
Dim lngX As Long
With Me.lstAccounts
If .ListIndex <> -1 Then
For lngI = 0 To .ListCount - 1 ................
Im trying to copy all the unique values from one column to another and the easiest way seems to be:
Set SourceRange = Worksheets(page2). Range("C1:C17365")
SourceRange. AdvancedFilter Action:=xlFilterCopy, _
CopyToRange:=Worksheets(sida3).Range("B"), Unique:=True
However, I get the error- message: Run-time error '1004': Application-defined or object-defined error
I have a multiselect listbox with values that gets populated from a sql statement, and I would like to get is the first or second index from the selected item. I know how to get the listindex from a combobox by using:
VB:
cbnumber.List(.ListIndex, 0)
How can I loop through and get the 1st index number for the selected items only from the listbox? I want to pass this index number to another sql statement.
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
I need to get a macro to select all the data in column "A", sort it in ascending order, omit the blanks if any, then select (highlight) all the data so that another macro can be run.
When I record it, it will only record up to the last row I highlight but the data always changes so there could be more or less.
I have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View RelatedI have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
For the following code, I'm getting the " Case without Select Case" error (On Case 3 to 5...assuming more are wrong too, but debug can't get there yet). I thought I had it right, obviously don't. Can anyone spot how my code is wrong? ....
View 9 Replies View RelatedOne is I recorded a macro to do what I need it to do, however, I am stumped when I want it to "select the next available row" on a worksheet.
Two is the same recorded macro, how do I have it take a number from a cell and add it to another number in another cell and replace that last number? (keeping inventory)
Three is after I get those to figured out, how to I attach that macro to a command button
I want to learn 2 - I make pretty large projects and I find myself using a lot of the same code over and over, however, I doesn't mean it was written correct the first time. 3 - I have used code others have posted (or variations of).
Range("Y3:AA3").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Range("Y3").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("U2").Select
Application.CutCopyMode = False
I want to copy Sheet1 and Sheet2 from one workbook to another. (Let us assume abc.xls and def.xls)
I have created a command button in def.xls and When I click the command button from workbook def.xls a popup window should open asking me to select file. Once I locate the file it should start copying.
After copying a message box should appear stating copy finished.
I am trying to monitor my turnover and taxes but struggling slightly to get things to work. I have attached a spreadsheet that has comments inserted to show what it should be doing, I just can't get that to happen at the moment.
OzGrid help.xlsx