AdvancedFilter Error: The Extract Range Has A Missing Or Illegal Field Name

Aug 26, 2006

Trying to pass an array to a procedure to use as criteria in advanced filer.
My code below is raising this error:



Run-time error '1004':
The extract range has a missing or illegal field name


rngData. AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=rngCrit, CopyToRange:=rngDest, Unique:=False


Private Sub btnOK_Click()
Dim arrValues()
Dim lngI As Long
Dim lngX As Long

With Me.lstAccounts
If .ListIndex <> -1 Then
For lngI = 0 To .ListCount - 1 ................

View 9 Replies


ADVERTISEMENT

Runtime Error 1004 :: Extract Range Has An Illegal Or Missing Field Name

Dec 5, 2007

"Extract range has an illegal or missing field name"

I am trying to use a simple advanced filter (unique) function. Any ideas on why I could be getting this error?

View 9 Replies View Related

Missing Field

May 20, 2006

I want to write code that will allow me to show the Missing Names in the Old sheet that aren't in the New Sheet.

I want the code to go along these lines:

Dim a As Long
a = 2
Dim o As Long
Dim p As Long
Dim last_row14 As Long
Dim last_row24 As Long

View 5 Replies View Related

Missing Category Field In VBA Pivot Table

Jan 11, 2013

I have a macro to create a report and it selects to place in the pivot table. The problem is that sometimes in my basic data for creating the pivot table, not all the same fields are there. Here is what it looks like for this section now.

With ActiveSheet.PivotTables("PivotTable2").PivotFields("Category Id")
.PivotItems("ARMS/AMMO/EXPLOSIVES").Visible = False
.PivotItems("COMPUTER").Visible = False
.PivotItems("COUNTERFEIT GOODS").Visible = False
.PivotItems("DRUGS").Visible = False
.PivotItems("GENERAL MDS/OTHER").Visible = False
.PivotItems("PROHIBITED ITEMS").Visible = False
End With

In the instance for today, the field "Drugs" is not in my main data. So I get an error box and it stops because the category is not there. How can I get this to continue if one of the fields is not found?

View 1 Replies View Related

Clear Range Ready For AdvancedFilter Copy To...

Mar 27, 2008

I'm using this macro to retrieve data from a worksheet within the same workbook. As you can see, I've set the destination range between row 12 and row 20. The problem is this code clears all text (not other formatting) from row 12 down even farther than the row 800 that is the end of my Origin range. QUE: How do you limit the reach of the ClearContents code?

Origin Name Range Definition
= 'ORDERS 1st QTR 08'!$A$1:$J$800

Sub GetData()
Application. ScreenUpdating = False
Range("A12:J20").ClearContents
Range("Data_Table"). AdvancedFilter Action:=xlFilterCopy, CriteriaRange:= _
Range("M1:M2"), CopyToRange:=Range("A12"), Unique:=False
Application.ScreenUpdating = True
End Sub

View 9 Replies View Related

AdvancedFilter: Application-defined Or Object-defined Error 1004

Nov 14, 2006

Im trying to copy all the unique values from one column to another and the easiest way seems to be:

Set SourceRange = Worksheets(page2). Range("C1:C17365")
SourceRange. AdvancedFilter Action:=xlFilterCopy, _
CopyToRange:=Worksheets(sida3).Range("B"), Unique:=True

However, I get the error- message: Run-time error '1004': Application-defined or object-defined error

View 2 Replies View Related

Extract Numbers From Field?

Sep 18, 2012

I run this report from ADP and it only comes out in PDF or txt. I copied and pasted it to Excel, but it comes out funny. Below is a sample of the data from one field and I am trying to extract the 6 digits (it's the employee ID) from everyones name with a macro to the adacent column (.i.e data is in col B3, I would like the output to be in cell B4)

The problem is the 6 digit numbers isn't in the same location and I didn't know how to extract it.

Sample Data

MEYOR,SAM 010046 A 07/30/1979 -----> 010046

000548 A MOLINA,DARREN 06/01/2002 -----> 000548

View 8 Replies View Related

Extract Month For Seemingly Date Field?

Nov 7, 2013

I need to extract a month from a field which looks to me like a date field, but as you can see in the file: Month(A1) returns 11/01/1900 instead of 06/11/2013.

View 4 Replies View Related

Extract A Fill Pattern From A Cell Comments Field

Jun 21, 2008

I have a file where comments are used for some cells. The user does not insert any text into these comments fields, but uses the comments feature to display pictures.

A picture is used for the fill pattern of the cell (inserted through fill effects) and that picture is what is displayed when someone moves the mouse over the cell.

The "fill pattern picture" becomes part of the excel file and my question is how can I extract this picture and use it somewhere else.

View 9 Replies View Related

Extract Zip Code From Address Field - Return Blank If Not Found

Jul 17, 2013

I'm very new to excel. I need a formula to put in a column (I) that returns ONLY a five-digit zip code from the adjacent cell in column J, which is a full address. Nearly every entry is written differently, and many do not contain a zip code. I would like the cell to be blank if the cell in J contains no zip code .

I'm using the formula:
=MID(J5,MATCH(TRUE,ISNUMBER(-MID(SUBSTITUTE(J5,"","#"),ROW(INDIRECT("1:"&LEN(J5)-4)),5)),0),5)

This formula sometimes returns -**** format numbers, considering them to be negative and still five-digit. It also returns #N/A if no zip code is present, and I would like this to be blank. I'm sure I can nest the formula within an IFF, but have not been able to make it work myself.

View 4 Replies View Related

Extract Two Separate Numbers Of Varying Length From Text Field

May 24, 2014

a formula to extract the numbers into two separate fields. The text may vary in length and the numbers vary in length also from 1 digit to 2,000,000.

Data in A1 is as follows:-

Meter reading Old:1345 New:67890

View 9 Replies View Related

Missing References VBA Fix (to Avoid Compile Error)

Nov 3, 2009

I have an excel database which links into Outlook and Word via macros to automate sending of e-mails and creating documents, etc. Obviously, I have created the correct VBA references and things have been working fine for a while.

However, this is a shared workbook over a small number of machines and due to a recent upgrade, one of the machines is running Vista and Office 2007, whereas the rest run Office 2000 and NT.

All works well until the workbook is opened and saved on the Office 2007 machine as this then changes all the references to Word 12, Outlook 12, etc, instead of Word 9 as seen in Office 2000. Then, when an office 2000 machine opens the workbook, it has a compile error as it cannot find the office 12 references!!

I have created some code to fix this, which uses the AddFromGuid method, which works ok, e.g.:

View 14 Replies View Related

Remove Illegal Characters From File Name

Dec 7, 2006

Remove Illegal Characters From File Name ...

View 5 Replies View Related

Dependant Drop Down Validation With Illegal Characters

Dec 1, 2008

Does anyone have an example of dependant drop boxes with illegal characters in them? Even just a teensy one... If I have an example I can manipulate I can actually see what does what... The several-paragraph-long explanation with descriptions of what's being referenced by what and where and why - isn't helping me any.

View 6 Replies View Related

Monitoring InputBox Input For Illegal Characters

Sep 28, 2007

I have an input box that takes in a file name. Obviously, sometimes people put in illegal characters which can't be used in a file name and I need to deal with this. I can check the variable once they have pressed enter but is there a way to check it as they type it in?

It would be very nice to either have nothing happen if they type in a slash or for a msgbox to pop up, as it does in Windows,

View 9 Replies View Related

Referencing A Field With An Error In It

Mar 15, 2007

My problem is I have a field when imported occasionally has a #Value! error in it. Most of the records are fine. As I will be importing it into another DB I need to have the #Value! removed and replaced with a Zero. Here is what I tried. I have a field that is displaying a #value! error. In another field that is referencing that field I wanted to do the following if statement. Basically if that error value is displayed show a zero, else show the value of the square. (Note I also tried it with an IIF but got a # Name? error)

If((Q2) = "#Value!",0,(Q2))

Or should I be looking for an error? When I ran it, It basically gave me the value of the Q2 field.

If((Q2) = Error(#Value!),0,(Q2))

Or is there some other way to get around the error?

View 2 Replies View Related

#div/o Error In A Blank Fiield Or Field With A 0..

Jan 15, 2009

I tried to read the post and figure it for myself, however close I have not been successful at eliminating this error(#div/0)in a blank fiield or field with a 0.
Below is the formula can someone please help with the IF portion that I can use to correct this statement. =SUM(B12:E12)/F12

View 3 Replies View Related

PivotTable Error: Field Name Is Not Valid.

Jan 27, 2009

I successfully created two PivotTables two days ago, but when I added more rows of data to the source worksheet I could not refresh either PivotTable view. So after much frustration, I deleted both worksheets and again tried to create a new PivotTable using the wizard. I keep getting this error, and have no idea what it is telling me so that I can go about fixing it:

"The PivotTable field name is not valid. To create a PivotTable report, you must use data that is organized as a list with labeled columns. If you are changing the name of a PivotTable field, you must type a new name for the field."

View 2 Replies View Related

Date Format Error - General Number Field

Feb 18, 2013

I have a spreadsheet with a column full of dates

I used the formatting wizard to make all dates the format of dd/mm/yyyy but, now, when I put a date in the column it throws up a number '41313' instead of a date, even if I manually input the date in the same format as above.

Also, I have tried to turn cells back into general number fields, but this doesn't appear to be changing it back to a date format..

There are HUNDREDS of dates I might have lost if I can't get them to start showing as dates again!

View 2 Replies View Related

Calculated Field Average Error In Pivot Table?

Dec 10, 2013

I created a custom formula for a pivot table.the existing columns are weekly averages.I made a formula to calculate the average of 5 individual weeks.But when one of the value is blank.Blank cell is considered as zero.and hence the final average is wrong.

View 2 Replies View Related

Excel 2007 :: ERROR - Pivot Table Field Name Is Not Valid

Nov 3, 2012

Excel 2007

No empty rows
No empty cells
No calculations in cells

Field names look fine - no punctuation no merged cells

If I select one column - any single column I can generate a pivot table but not with multiple columns

View 4 Replies View Related

Formula That Will Recognize Date Range And Sum Specified Field Based On Range?

Jan 2, 2014

I like to create "templates" for files that I work with on a reoccuring basis, just to make things simpler. The current template I am working on tracks items processed by day and is used for two reporting purposes; 1 totals the pay ending items processed so I have the dates laid out based on the 2 week period with formulas for that. The 2nd way it is reported is by the month. Since this is a template, only the first day of the first pay period for a calendar year needs to be entered and the rest of the dates populate based on that date. What I would now like to do is add columns for January - December monthly totals using a formula that will read something like "if column A (where the date is) contains 1/1/2014 - 1/31/2014, then sum up column L" and than copy that formula for the remaining months.

View 8 Replies View Related

Find Missing Value In Range

Oct 7, 2009

Say i have a range A1 to A10 that contains these numbers

101
102
103
104
356
106
225
107
108
109

I need some code that will help me find the next highest missing number in the value range of 101 - 199 in that range A1 to A10. In this case it would be 105

View 12 Replies View Related

Compare Two Columns, If Missing Insert Missing Data

Jul 8, 2008

I have two columns which i want to compare, they contain text data such as A123.

what I'd like is if its in column A and not in Column B then add to bottom of column A.

Once its in column A i can do the vlookup's to draw the other data, costs etc, over but don't know how to identify, and add, the missing codes to the list.

View 9 Replies View Related

Missing Blank In Dynamic Range

Aug 4, 2006

I have a named dynamic range with the source
=OFFSET(Data!$J$2,0,0,COUNTA(Data!$J:$J),1)
Thia is set up as the data validation list in a cell with a drop down
list It is set so that once the drop down is activated there is the
option of selecting a blank from the bottom of the list so that if you
activate the cell in error you don't have to delete any entry you are
forced to make, you can select the blank and leave the cell blank. This
works fine until the list gets quite long at which time there is no
option of a blank.I don't know the number in the list where this starts
but certainly a list over 100 has this problem. On shorter lists the
blank is selectable. The selection is correct as when you check the
named list it shows the correct range. I would welcome any views on
solving this if it can be resolved.

View 11 Replies View Related

Dynamic Name Range, Missing Some Of The Data

Mar 13, 2007

I have a pivot table based on a sales sheet called "Datasheet". I have created the pivot table using a dynamic name as below =OFFSET(DataSheet!$A$1,0,0,COUNTA(DataSheet!$A:$A),12). My problem is that I have 11100 lines of sales data but the when i refresh my pivot table it only seems to be going down to row 10979. Therefore missing out some of the data. Is there a max number of lines for a dynamic named range or is my formula wrong in any way

View 3 Replies View Related

Identify Missing Numbers In Range

May 14, 2007

I'm trying to create a list of missing numbers in a range, but I can't fiure out how to do it. The problem lies in that the range of numbers is in the middle of a larger number. ie. xxx-xx-0001-xx would be number 1, and xxx-xx-0500-xx would be number 500.

I need to scan multiple sheets containing these numbers, and produce a list of the numbers missing from that range.

Example:

Sheet1 has xxx-xx-0001-xx through xxx-xx-0009-xx, and xxx-xx-0018-xx through xxx-xx-0042-xx.

Sheet2 has xxx-xx-0053-xx through xxx-xx-0062-xx, and xxx-xx-0067-xx through xxx-xx-0072-xx.

Sheet3 needs to have a function that produces a list showing xxx-xx-0010-xx through xxx-xx-0017-xx, xxx-xx-0043-xx through xxx-xx-0052-xx, and xxx-xx-0063-xx through xxx-xx-0066-xx.

I need to be able to do this without VBA. The list doesn't necessarily have to have a different number per cell, it could even show them all on 1 cell if it's easier, but it would be more presentable if it was 1 number per cell in a row or column.

View 9 Replies View Related

Set Range Of Cells For Searching Missing Combinations?

Apr 19, 2014

The following macro searches for missing combinations. This macro will search the complete list and will return any missing combination from "1, 2, 3, 4" to "7, 8, 9, 10".

I need to make some changes in this macro, so that it will search for missing combinations only within a specified range of cells (and not the whole list). For example (see excel file attached), I would like to place a search within range("G23:J183"), from combination "1, 2, 6, 9" to combination "4, 6, 8, 10". In this case, it should return only 9 missing combinations.

Attached File: Example Find Missing Combinations.xlsm‎

View 2 Replies View Related

Fill In Gaps - Missing Days In Range

Mar 29, 2012

I get given a csv file on a monthly basis which contains consumption data per day for the specified period. This sounds simple but on occasion (more often than not) the data has missing days. This can cause me problem later on in my analysis.

I can happily total the monthly consumption using the date and month text. What i want to do however is to sort the csv file into daily consumption and highlight the missing days i.e. have a range of the days in the month and allocate the daily data to the correct date. I currently do this manually but know that there must be a better, automated approach... searching for matching dates for example?

In my head i'm thinking the following approach but lack the coding skills to do it.

1. Define the start and end dates. Perhaps count the number of days between the two dates and autofill the start date down the appropriate number of days in column A?

2. Paste the csv file into a different sheet and, starting from the top, cut and paste the csv data to the correct date created in step 1. Do this for each row based on the csv data.

View 1 Replies View Related

AdvancedFilter Select First Row

Feb 29, 2008

Is there a way that I can tell my VBA code to select the first row that my advancedfilter is showing? The row number changes, depending on the criteria selected. I need to be able to select this row, so I can hide the first row the filter is showing. I tried an offset command, but that just selects one of the rows hidden by the filter.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved