I'm having trouble coming up with vba code to align values in columns A and B on my workbook. I've attached a sample spreadsheet to illustrate what I am in need of. I've searched the forum and can't quite find the same problem. In my case, their may be the same value more than once in a column, so I'm not sure that vlookup would work.
View 5 Replies
I need a macro to identify the word "(blank)" based upon alignment (here it is left most) and to delete the next 4 rows only.
View 6 Replies View RelatedI have the following ...
.Offset(3, 0).Value = "For " & P & " numbers there are " & Format(tly, "###,###,##0") & " x different values of " & cmb & " numbers. "
... which includes figures upto and including millions.
The thing is that the above code ONLY produces figures that are relevent.
I have 5 columns of numerical data from Column L to P.
I use the SumIF function in column S to add all the negative numbers, if any.
I then use the IF function in Column R to add the loan # wherever negative values are present.
Here is a screenshot of what it looks like after I'm done with the above:
All I need to do is align this data and move it to the bottom, near the total. This is to make it look presentable and i'll know the defaulting loans at a glance.
I can move it manually, but there are over 50,000 loans and its time consuming.
So, I need a macro to do it, but I'm not sure how to code it.
Below is the screenshot of what it should look like:
Its basically just eliminating the blank cells. Can someone please help me out with the macro code for it?
here is the code i'm using for the SumIf.
Sub addadvances()
Do Until IsEmpty(ActiveCell.Offset(0, -3)) And IsEmpty(ActiveCell.Offset(1, -3))
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "=SUMIF(RC[-7]:RC[-3],""
How to show negative values displayed in brackets so that it is aligned properly with positive values in the same column. That is, the right bracket of the negative value is as follows:
(1,234.56)
800.12 - so that 2 is aligned underneath 6
I have done research on the forum and help on vba and got the following
"#,##0.00_);[Red]($#,##0.00)"
I understand that the underscore is needed for the alignment.
However, when I include the _) the above is shown as follows:
(1,234.56)
800.12_) the underscore and bracket are included and the bracket and is aligned underneath the right bracket above.
I feel stupid asking this, but for some reason I am having trouble keeping alignment of columns in a Pivot Table....
I have a Column of text in a pivot table and I am just trying to center the darn thing... but no matter what I have tried, when I refresh the table it goes back to left-aligned....
I have Preserve Formatting set on... in the Table Options.
I have a fixed height userform textbox that i would like to show the last line of.
After there is text in the textbox, enable=false.
I can see how to align for left, right and centre, but not for bottom.
I don't want to change the height or size of the textbox and just need to display the last line of data.
These charts are generated via a macro and have to be aligned using VBA.
The charts look fine on my screen bu their alignments and position are messed up when another person uses it on another computer.
This is the code i am using to align the charts
chartwidth = 300
chartheight = 200
With ActiveSheet.Shapes("Chart 1")
.Width = chartwidth * 2 + 10
.Height = chartheight
End With
With ActiveSheet.Shapes("Chart 2")
.Width = chartwidth
.Height = chartheight
End With
With ActiveSheet.Shapes("Chart 3")
.Width = chartwidth
.Height = chartheight
End With
ActiveSheet.Shapes("Chart 1").IncrementLeft -128.25
ActiveSheet.Shapes("Chart 1").IncrementTop -75
ActiveSheet.Shapes("Chart 2").IncrementLeft 182.25
ActiveSheet.Shapes("Chart 2").IncrementTop 139.5
ActiveSheet.Shapes("Chart 3").IncrementLeft -126.75
ActiveSheet.Shapes("Chart 3").IncrementTop 138
Example of Cell Movment.xlsx
The following attachment should explain what I am trying to accomplish.
As a simple example, I have three columns (A,B,C). In both Column A and B they have single word text in them, but in Column C it is a paragraph of words that I format the cells to 'fill' so that it is all tight and concise when viewing the worksheet.
Afer I have saved the document and have closed it when I reopen the document. Cells from column C have randomly duplicated themselfs throughout the entire worksheet,but only onto columns A,B,C (where there is pre-existing text). As the random cells get duplicated it overrights the original text (results) as it does it, so once I open up a document and see this it is to late. this is a continual problem that I cant find a resolution for.
I have 5 columns of data where each column of data has two number in it separate by a space where the headers for each column is c1, c2, c3, c4 and c5. for example
c1 c2 c3 c4 c5 c6 c7 etc
1 1 1 2 2 2 2 1 1 1
3 3 3 4 4 4 4 3 3 3
etc
where each of these number pairs is under a separate column. The preview option for this forum editor is showing quite a difference between intended presentation and actual..
What I am looking to do is for each line item is to put the content of each row into a single cell with vertical alignment of the pairs of numbers. for example
c6
1 1
1 2
2 2
2 1
1 1
3 3
3 4
4 4
4 3
3 3
where each group of five pairs is in a single cell.
I am looking to do this in as automated an approach as possible. I dont want to have to ctrl-enter for example 4 times for each cell in c6 for 1000 different line items..
i am looking for excel custom number format for 0 (zero) number that make center alignment..
for example ;
sample (when type 0 (zero) number)
after custom number format
- (right alignment)
- (center alignment)
how make center alignment with custom number format for 0 (zero) number..
I am trying to make a save&close workbook macro.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible.
If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code:
Sub RSLDASHBOARDV2()
'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D.
'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D.
'Do Not Modify Code Unless Given Proper Privileges to do so.
Dim APPSPD As Worksheet
With Application
.ScreenUpdating = False
.Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code:
objField2.PivotItems( _
"TRC").Position = 1
objField.PivotItems( _
"MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code:
Sub STATSPIVOT()
'STATS PAGE BASED ON STATS DATA TAB
Sheets("STATS DATA").Select
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("STATS DATA").Select
Range("A1").Select
[code]...
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
Windows("estimate sheet one.xls").Activate
I have a macro where I manually select a cell then the macro kicks in to copy and paste the contents into the Find function. From there it goes to another work sheet, clicks on a cell in column one and searches for matching cell contents. Then If false it manually goes back to the original worksheet/cell and then I input a N in the left adjacent cell. If true I enter a Y. Right now I can only run this for the specific cell the macro was recorded for. I would like to expand this.
What I would like to do create a loop in the macro that waits for my cell choice input then continues with the with the Find function. If false the macro should just loop back to the original worksheet/cell and wait for input, ie the next cell selected. However, if true a worksheet/cell is selected, a Y is input and it loops back to the original cell and waits for input.
This is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I also tried this code.
[Code] .....
I have a macro that I found somewhere on the net to look within a folder and list all the files of a certain file extension.
The macro to do this is in the attached example and is called 'Get_File_Names_Within_Dir_ext'.
I have created a basic userform outline, 'UF1' for the user to define:
Select File Extension
Select Folder to Search
Destination Sheet
I just don't have any idea how to sync the two.
If you type 'exe' into 'TB1_File_Extension' of 'UF1' the macro should search for '*.exe' files within the specified folder.
The search folder 'RefEdit1' box should open a windows explorer box (or some such) so that the user can select the directory in which to search for the previously specified file extension.
'TB2_Destination_Sheet' is a text box for the user to type the sheet within the workbook in which to list the files found within the specified directory.
'CB1_Find_Files' should activate the macro to find any files for the specified criteria.
There is also a Button 'Find File Types' in Sheet1 of the file which should activate the userform 'UF1'.
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
I need a macro to get the values from cells D29 and H24 in the Resource Calculator sheet and populate it into cells N8 and O8 in the Input form.
Users will then be able to change the information in the calculator and click the macro again to populate N9 and O9 and so on.
Is there a way to do this?
I've attached the file for you to see.
I have a macro which refreshes a query when the spreadsheet is opened. This works fine when online.
However, if the user is not online, the query is unable to refresh and the macro just hangs.
Is there a code which will enable me to say " if unable to refresh then move on to the next line"?
here's the code below.
Private Sub Workbook_Open()
Sheets("Houselist").Activate
Selection.QueryTable.Refresh BackgroundQuery:=False
Sheets("Front").Select
Range("A1").Select
End Sub
I am looking for a macro that i can store in my personal.xlsb. what i need is pretty much is something like this
private sub workbook_open
if workbook.name "inventorysummary.csv"
then application.run "personal.xlsb!capacity"
end sub
I only need it to run just for this file and i cannot place it in the file due to it gets replaced every day. Which if it didn't get replaced. I know how to do auto opens when the file stays the same I am just unsure for this.
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I have written two VBA programs around the same time. Both run on open and pull external data and create graphs. My problem is that I want the end user to be able to run the report multiple times by choosing the name of the macro from the Excel macro menu (i.e. Tools>Macro>Macros) but only one of the workbook macros shows up on the menu. why the other macro is not visible on this menu???
View 2 Replies View RelatedI've recorded a macro that copies an entire tab into a new spreadsheet then goes on the copy and paste information from one tab to another.
When I run the macro from the Tools>Macros menu it works perfectly.
But when I copy the code and add it to that of a button it fails and posts the following error: Run-time error '1001': Select method of Range class failed.
The first attachement shows the code for the macro as it is alone, and the second shows how I simply copied and pasted it into the 'view code' window of the button.
Needless to say I'm a beginner at macros and only every record them, I can usually make stuff work that way but this has me stumped!
Put in a statement within a Macro that populates cells with the values that I want it to but instead of populating all at the same time, is it possible for the values to be delayed.
I have designed a mock spreadsheet (attached) it has two columns 'Before' and 'After'
After = Before values (in this mock)
When you press the button, the values are populated straight into the 'After column' can we add the delay between the values? So that the values dont come up straight away.
Macro to export and import a module and assigning different macro automatically ...
View 9 Replies View RelatedI have recorded the following marco and it works fine. I would like to modify it so the user would highlight a range of cells rather than have the fixed area :
"'ConsExecProp@20120920'!R4C5:R113C21"
What code lines would need to be added?
Application.Goto Reference:="R4C5"
ActiveWorkbook.PivotCaches.Create(SourceType:=xlConsolidation, SourceData:= _
Array("'ConsExecProp@20120920'!R4C5:R113C21"), Version:=xlPivotTableVersion12 _
[code]....
I have a userform with a command button which fires a macro.
everything works fine so far.
my problem is:
I would like to add a msgbox at the end of the macro which confirmes "successfully completed".
I cannnot simply add the msgbox at the end of the macro. don't know what I'm doing wrong.
(see below)
Private Sub CommandButtonOK_Click().
If Me.OptionButton1.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Government Securities"
ElseIf Me.OptionButton2.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Corporate Bonds"
[Code].....
Unload Me
Application.ScreenUpdating = False
Sheets("MySheet1").Select
Application.ScreenUpdating = False
'run macro
MyMacro1 (adds, hides and deletes various sheets)
MyMacro2
[Code]....
