I have a fixed height userform textbox that i would like to show the last line of.
After there is text in the textbox, enable=false.
I can see how to align for left, right and centre, but not for bottom.
I don't want to change the height or size of the textbox and just need to display the last line of data.
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
way to have more than one font style and/or to allow carriage returns within a TextBox?
Trying to use one large TextBox for "Help", but it won't be very readable if it's got no headings or paragraphs!
I want to add variable content to a textbox in a userform. I want to duplicate a Msgbox as closely as possible to allow me to position the box properly, and I would like a procedure to add a prompt to the userform as you would to a Msgbox.
That is, I have found a solution using a cell in my spreadsheet, but I would like a fully vba oriented solution. In the message box you can say
MsgBox Prompt:="Put your message here."
For a textbox in a userform, I can link it to a cell (say A1) and then put data into the cell
Range("A1").Value = "Put your message here."
and it shows up in the text box when I do a
Userform1.Show................
I have a calendar userform that enters a date into a userform textbox in the format mm/dd/yy.
I am in the UK, so default date format is dd/mm/yyyy but i need it as above - mm/dd/yy
So, when I get a MsgBox to repeat Textbox1.Value (the date from the calendar object, formatted mm/dd/yy) and repeat it in format dddd mmmm dd yyyy, it reads the value not as I want it, mm/dd/yy, but as the usual dd/mm/yyyy - so instead of reading 08/01/12 as Wednesday August 01 2012 it is giving me Sunday January 08 2012 - even though in the cells on the worksheet that are populated from the textbox, the date reads correctly, so 08/01/2012 is indeed 1st August 2012 not January 8th 2012...
So it's the MsgBOx function reading the textbox in the userform wrong, and formatting makes no difference...
Can I fix this without changing my regional settings? Is there a way to set the region in vba then unset when leaving the program? I don't want to have to change regional, and anyway, the program will be used by others who won't know / want to do that.
We can center horizontally with TextAlign (Left, right or center). Can we center text in a textbox on a userform vertically? I am working with multiple fonts, when a user selects a font I attempt to format a textbox as a display to show what is being created (Best WYSIWYG as I can). I have this particular font that is just ugly but is required. My textbox is set for a 12 point font but the displayed characters partially appear below the lower portion of the textbox. Think of cutting off about 1/3 of the bottom of all text in the textbox.
In my textbox it seems like the text could be moved up (some type of top margin?). All other fonts appear to display in the textbox vertically central, so I believe its the particular font selected causing the as displayed anomaly.
Is it possible to selectively format text in a textbox on a userform ie. to make some of the text bold, other parts underlined and other parts italic etc. The text which appears in my text box is entered automatically by a piece of code which extracts the contents of certain cells and arranges them in the text box as needed. I would now like to be able to display the text box with the text formatted so that its not just all in plain text.
View 4 Replies View RelatedI have a table with huge amount of data. I use a UserForm with textboxes to populate the information of the required row.
There's a Comment Box text on a specific cell that I need to populate on one of the textboxes but I am unable to do it.
The code I have that works well, populates the cell content:
[Code].....
Now, on that cell, there's a comment text that I need it populated as well on another textbox but it doesn't work. I tried:
[Code] .....
But this doesn't work.
If it is how do I convert the user input for the text box field as number. thx
View 3 Replies View RelatedI have a user form on which I need to create a textbox every time the user clicks a button. There are too many to create them all in advance and make them visible when needed. The sample attached, from this forum, is good, except, the numbers in the text box just scroll along and I need to see all the text typed into my textboxes. I would like the textboxes to be multiline, wordwrap and have them resize according to the amount of text.
View 6 Replies View RelatedI've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
I have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedI want to populate a textbox (output) on one userform with data from a textbox (target) on another userform.
The data in the textbox (target) is the result of calculations in the userform code and is not gathered from or saved to a cell.
I want the textbox (output) to be populated at "Userform intialize" event.
I have tried various other methods without any success.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
I've created a userform with a text box and a command button (Enter)
On clicking the command button I'd like whatever text has been entered into the userform to be put into a cell (Say A1).
I have attached my file.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub
I have the following ...
.Offset(3, 0).Value = "For " & P & " numbers there are " & Format(tly, "###,###,##0") & " x different values of " & cmb & " numbers. "
... which includes figures upto and including millions.
The thing is that the above code ONLY produces figures that are relevent.
I have 5 columns of numerical data from Column L to P.
I use the SumIF function in column S to add all the negative numbers, if any.
I then use the IF function in Column R to add the loan # wherever negative values are present.
Here is a screenshot of what it looks like after I'm done with the above:
All I need to do is align this data and move it to the bottom, near the total. This is to make it look presentable and i'll know the defaulting loans at a glance.
I can move it manually, but there are over 50,000 loans and its time consuming.
So, I need a macro to do it, but I'm not sure how to code it.
Below is the screenshot of what it should look like:
Its basically just eliminating the blank cells. Can someone please help me out with the macro code for it?
here is the code i'm using for the SumIf.
Sub addadvances()
Do Until IsEmpty(ActiveCell.Offset(0, -3)) And IsEmpty(ActiveCell.Offset(1, -3))
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "=SUMIF(RC[-7]:RC[-3],""
I'm having trouble coming up with vba code to align values in columns A and B on my workbook. I've attached a sample spreadsheet to illustrate what I am in need of. I've searched the forum and can't quite find the same problem. In my case, their may be the same value more than once in a column, so I'm not sure that vlookup would work.
View 5 Replies View RelatedHow to show negative values displayed in brackets so that it is aligned properly with positive values in the same column. That is, the right bracket of the negative value is as follows:
(1,234.56)
800.12 - so that 2 is aligned underneath 6
I have done research on the forum and help on vba and got the following
"#,##0.00_);[Red]($#,##0.00)"
I understand that the underscore is needed for the alignment.
However, when I include the _) the above is shown as follows:
(1,234.56)
800.12_) the underscore and bracket are included and the bracket and is aligned underneath the right bracket above.
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
Want to tab to next textbox in a userform.
Sample workbook has a userform with 4 textboxes.
When I enter something in textbox 1 and then try to tab to the next box, it tabs within the same box.
Attached sample : Form1.xlsm‎
i have a tabbed userform, that has 13 text boxes on each ,
how can after i have updated one tab unload to a specific cell in excel ?
textbox1 i need value when i "Unload" to b $F$6
textbox2 will be $F$7
textbox3 $F$8
etc etc
but i have no idea how to do this , i have a cmdbutton on bottom ready to unlaod to excel , can anyone start me off on right tracks
also is there a way to when this sheet is opened this userform is shown
I feel stupid asking this, but for some reason I am having trouble keeping alignment of columns in a Pivot Table....
I have a Column of text in a pivot table and I am just trying to center the darn thing... but no matter what I have tried, when I refresh the table it goes back to left-aligned....
I have Preserve Formatting set on... in the Table Options.
