Alignment Of Data
Jan 9, 2010
I have 5 columns of numerical data from Column L to P.
I use the SumIF function in column S to add all the negative numbers, if any.
I then use the IF function in Column R to add the loan # wherever negative values are present.
Here is a screenshot of what it looks like after I'm done with the above:
All I need to do is align this data and move it to the bottom, near the total. This is to make it look presentable and i'll know the defaulting loans at a glance.
I can move it manually, but there are over 50,000 loans and its time consuming.
So, I need a macro to do it, but I'm not sure how to code it.
Below is the screenshot of what it should look like:
Its basically just eliminating the blank cells. Can someone please help me out with the macro code for it?
here is the code i'm using for the SumIf.
Sub addadvances()
Do Until IsEmpty(ActiveCell.Offset(0, -3)) And IsEmpty(ActiveCell.Offset(1, -3))
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "=SUMIF(RC[-7]:RC[-3],""
View 9 Replies
ADVERTISEMENT
Sep 17, 2007
I have the following ...
.Offset(3, 0).Value = "For " & P & " numbers there are " & Format(tly, "###,###,##0") & " x different values of " & cmb & " numbers. "
... which includes figures upto and including millions.
The thing is that the above code ONLY produces figures that are relevent.
View 9 Replies
View Related
Feb 23, 2007
I'm having trouble coming up with vba code to align values in columns A and B on my workbook. I've attached a sample spreadsheet to illustrate what I am in need of. I've searched the forum and can't quite find the same problem. In my case, their may be the same value more than once in a column, so I'm not sure that vlookup would work.
View 5 Replies
View Related
Sep 22, 2009
How to show negative values displayed in brackets so that it is aligned properly with positive values in the same column. That is, the right bracket of the negative value is as follows:
(1,234.56)
800.12 - so that 2 is aligned underneath 6
I have done research on the forum and help on vba and got the following
"#,##0.00_);[Red]($#,##0.00)"
I understand that the underscore is needed for the alignment.
However, when I include the _) the above is shown as follows:
(1,234.56)
800.12_) the underscore and bracket are included and the bracket and is aligned underneath the right bracket above.
View 9 Replies
View Related
Apr 14, 2009
I feel stupid asking this, but for some reason I am having trouble keeping alignment of columns in a Pivot Table....
I have a Column of text in a pivot table and I am just trying to center the darn thing... but no matter what I have tried, when I refresh the table it goes back to left-aligned....
I have Preserve Formatting set on... in the Table Options.
View 14 Replies
View Related
Feb 1, 2010
I have a fixed height userform textbox that i would like to show the last line of.
After there is text in the textbox, enable=false.
I can see how to align for left, right and centre, but not for bottom.
I don't want to change the height or size of the textbox and just need to display the last line of data.
View 9 Replies
View Related
Jun 28, 2007
These charts are generated via a macro and have to be aligned using VBA.
The charts look fine on my screen bu their alignments and position are messed up when another person uses it on another computer.
This is the code i am using to align the charts
chartwidth = 300
chartheight = 200
With ActiveSheet.Shapes("Chart 1")
.Width = chartwidth * 2 + 10
.Height = chartheight
End With
With ActiveSheet.Shapes("Chart 2")
.Width = chartwidth
.Height = chartheight
End With
With ActiveSheet.Shapes("Chart 3")
.Width = chartwidth
.Height = chartheight
End With
ActiveSheet.Shapes("Chart 1").IncrementLeft -128.25
ActiveSheet.Shapes("Chart 1").IncrementTop -75
ActiveSheet.Shapes("Chart 2").IncrementLeft 182.25
ActiveSheet.Shapes("Chart 2").IncrementTop 139.5
ActiveSheet.Shapes("Chart 3").IncrementLeft -126.75
ActiveSheet.Shapes("Chart 3").IncrementTop 138
View 3 Replies
View Related
Dec 31, 2013
Example of Cell Movment.xlsx
The following attachment should explain what I am trying to accomplish.
View 2 Replies
View Related
Mar 4, 2012
I need a macro to identify the word "(blank)" based upon alignment (here it is left most) and to delete the next 4 rows only.
View 6 Replies
View Related
Jan 23, 2008
As a simple example, I have three columns (A,B,C). In both Column A and B they have single word text in them, but in Column C it is a paragraph of words that I format the cells to 'fill' so that it is all tight and concise when viewing the worksheet.
Afer I have saved the document and have closed it when I reopen the document. Cells from column C have randomly duplicated themselfs throughout the entire worksheet,but only onto columns A,B,C (where there is pre-existing text). As the random cells get duplicated it overrights the original text (results) as it does it, so once I open up a document and see this it is to late. this is a continual problem that I cant find a resolution for.
View 9 Replies
View Related
Dec 5, 2012
I have 5 columns of data where each column of data has two number in it separate by a space where the headers for each column is c1, c2, c3, c4 and c5. for example
c1 c2 c3 c4 c5 c6 c7 etc
1 1 1 2 2 2 2 1 1 1
3 3 3 4 4 4 4 3 3 3
etc
where each of these number pairs is under a separate column. The preview option for this forum editor is showing quite a difference between intended presentation and actual..
What I am looking to do is for each line item is to put the content of each row into a single cell with vertical alignment of the pairs of numbers. for example
c6
1 1
1 2
2 2
2 1
1 1
3 3
3 4
4 4
4 3
3 3
where each group of five pairs is in a single cell.
I am looking to do this in as automated an approach as possible. I dont want to have to ctrl-enter for example 4 times for each cell in c6 for 1000 different line items..
View 5 Replies
View Related
May 11, 2014
i am looking for excel custom number format for 0 (zero) number that make center alignment..
for example ;
sample (when type 0 (zero) number)
after custom number format
- (right alignment)
- (center alignment)
how make center alignment with custom number format for 0 (zero) number..
View 4 Replies
View Related
Apr 28, 2009
I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
View 4 Replies
View Related
Dec 6, 2006
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
View 2 Replies
View Related
Jan 29, 2013
I am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
View 1 Replies
View Related
Dec 17, 2013
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following:
- there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
View 2 Replies
View Related
Jun 30, 2014
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
View 5 Replies
View Related
Apr 30, 2014
I am attempting to create a macro to generate emails based on data in a sheet. The goal is to run the Macro, and have it generate emails to send to contractors letting them know what they are going to be paid. For instance:
Name in Column J
Email in Column L
Memo in Column N
Balance in Column T
Due Date in Column P
Week Ending Date in Column H
Now what I would like to happen, is to tie a macro into a button that will create the email as follows:
To Field: Email address from Column L
Subject: "Company Payment Remittance Payment Date *Date from Column P*"
Body: Hello *Name from Column J*,
For *WE Date in Column H* you will be paid *Balance from Column T* for the time worked of *Memo in Column N*
Now the tricky part is that I want the email to contain all line items for each email address. So instead of sending one email per line, have the macro automatically put all of the information that needs to be sent to one email address into the message. I don't know if that is possible, but it sure would make my life easier if it was.
I have attached a sample workbook of the data that will be used
Example Workbook for Email Macro.xlsx
View 1 Replies
View Related
Feb 8, 2014
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:
For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:
Private Sub CloseButton_Click()
Unload UserForm1
End Sub
Private Sub ComboBox1_Change()
[Code] ......
View 2 Replies
View Related
Sep 27, 2011
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
View 2 Replies
View Related
Jul 4, 2012
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
View 2 Replies
View Related
Oct 19, 2012
I created a slick little excel sheet with the data coming in automatically via Access query. It has been working fine for months. Now all of the sudden there are a bunch of cells with missing data. The weird part is it's not as if whole columns are missing data, more like 90% missing. When I go to Access and run the query all cells are populated as the should be. There have been no changes to the query at all during this time.
btw...I am running Office 2010
View 2 Replies
View Related
Jan 11, 2013
I have created a pivot table that is connected to an input sheet with data. The input sheet retrieves data automatically from a external source through an add-in to Excel. When updating data the fields expands, but only for the items which have been changed. I want the table to be updated automatically, but not the fields expand automatically. Is there any pivot options to prevent this problem?
It should be mentioned that the pivot table is not directly connected to the input sheet (which is updated from the external source), but from a "help-sheet" reflecting the input sheet with some additional columns. I use conditional formatting and name range in the pivot.
View 1 Replies
View Related
Apr 22, 2014
Pivot Chart. I would like to set up something to where a user can click on an individual value on a pivot chart (currently a line chart set up with 4 data series) and somehow display some underlying data. I have a lot of information stored in a data worksheet that I can't display all at once, but if a user sees a questionable data point, he/she can click and learn more about it from source data, or even a new query of the data worksheet.
I am using Excel 2010
View 2 Replies
View Related
Jul 15, 2014
I have a table in the format below with about 3500 rows
Column A
Column B
0001
All vehicles, Retirements
0002
All vehicles, Retirements, Addition
0003
All vehicles, Retirements, Addition, Deletion from Y
I would like to change it to the following format:
Column A
Column B
0001
All vehicles
0001
Retirements
0002
All vehicles
0002
Retirements
0002
Addition
0003
All vehicles
0003
Retirements
0003
Addition
0003
Deletion from Y
View 3 Replies
View Related
Aug 2, 2013
I have three source workbooks that needed to be consolidated into a master workbook pasting the data with values & formatting.
The Master workbook also contains 6 additional worksheets that link to the data pulled in from the source files.
My question is how do I write the code so the source files populate the master in a specific order.
For example, the 3 source files are named "Central" "NED" and "WEST" and I need them to populate the master workbook in that order.
This is the code I am using to consolidate the data:
Option Explicit
Sub ConsolidateSheetsFromWorkbooks()
'Author: Jennifer Starr
'Date: 7/12/2013
'Summary: Open all files in a folder and merge data (stacked) on all
[Code] .....
View 1 Replies
View Related
Jul 24, 2014
Looking for a formula to accomplish the following:
I'm trying to populate cell A31 on a worksheet titled "VolumeTotals" with the data in Cell E23 from a worksheet titled "CurrentCustomers" if the merged cells F3-F22 on worksheet "CurrentCustomers" are equal to the word "Contract".
View 6 Replies
View Related
Aug 14, 2014
I use excel and would like to know how to copy a large volume of address data but at the same time filtering out irrelevant data placed under each other in a row, in this case, air compressors air conditioning web address etc ( see below for example). I need the first 5 lines only. The rows of unwanted data are irregular i.e some have 10 lines, others 5 , and others 2 or one line which makes using a formula difficult as there is no consistency. The data eventually need to be placed horizontally in columns to be compared to other address lists. To make matters worse, the text data has been merged and wrapped.
BDD LIMITED
3 Telford Place
L*****r QLD 4315
Phone: 07 5777 3622
View 14 Replies
View Related
Jan 8, 2014
I have a question about using conditional formatting in excel (2010); I made a table with the following columns:
"Supplier Name" "Supplier Lead Time" "Internal Lead Time" "Total Lead Time". I made two different scenarios to show different supplier lead times and different internal lead times, and used the minimum function in the "Total Lead Time" column to find the smallest total lead time to select the best supplier.
The last thing I would want to do with this set of data, is plug in a formula that would somehow indicate which supplier corresponds to the shortest total lead time (which supplier has the smallest supplier lead time). I'd like to be able to use a formula that enters the name of the supplier in a designated cell, which I could indicate as the "Preferred Supplier" cell. If this is not possible perhaps there is a way to highlight the supplier's name with conditional formatting?
View 2 Replies
View Related
May 5, 2014
I am working on a project that has 5 worksheets. I have been able to figure out everything else I need to do but this has me stumped. I have data in Sheet1 A6, that i want to place in Sheet2 A6, Sheet3 A6, Sheet4 A6 and Sheet5 A6 and keep data and formatting(BOLD AND UNDERLINE). So I change Sheet1 A6 and the other 4 sheets change also. I'm using Microsoft Excel 2007.
View 1 Replies
View Related
