Array Formula- Idenify The Location Of Each Row In Which All The Conditions Are True
My formula below work perfectly. I was wondering if their is a way for me to idenify the location of each row in which all the conditions are true. So, for example, if the formula generates an answer of 2, in a different cell it would give me the address of the 2 rows.
=SUM((K9:K72/L93))-SUM((K9:K72/L93))
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Formula To Return True/False If A Row Has 6 Contiguous 0 Values
I have number data in columns F through AK. In column AL I want a formula that will look in columns F through AK from the left to right. Once it identifies a positive value I want the formula to identify if after that positive number there are any occurances where there are 6 0's in a row (anywhere up until column AK). The formula can return a True or False. I want to drag the formula down across many rows of data. If the entire row contains 0's, I do not want it identified as a TRUE
View Replies!
View Related
Summing If Multiple Conditions Are True
I could probably fix by making a loop, but I am trying to avoid doing any more looping. The program that I am working on has way too much looping in it already, and is getting kind of bogged down. Here is what I need. On my worksheet, column D lists the names of farms, column E lists a specific chicken house on that farm (by number), and column F lists how many chicks are being placed into that house. What I need to do is find a way, within VBA, to add up all of the chicks in column F that correspond to a certain farm name (column D) and chicken house (column E). I can make something like this work in excel, but not in VBA. For example, if I wanted to find out how many chicks were being delivered to Johnson Farms, house 4, I would use this formula: = SUM(IF(($D$5:$D$25="JOHNSON FARMS") * ($E$5:$E$25=3),$F$5:$F$25 ))
View Replies!
View Related
Find The Location Of A Duplicate Value In Array
Is there a good way to find out after the exists returns True in which place in the array the Z is located in ? ... With CreateObject("Scripting.Dictionary") .CompareMode = vbTextCompare Z = a(i, ii) & ";" & a(i, ii + 1) If .exists(Z) Then msgbox "The array location for existing Z value is ..."... ...
View Replies!
View Related
Insert Row At Variable Location
I had a quick question for something that should be simple but I can't figure it out. I have a column of sorted values, it goes A A A A A B B B B B and I want to insert a row to separate the A's from the B's. But there will be a random number of A's. I can figure out how to count where the A's end. But I can't figure out how to insert a row. Any suggestions? I tried the two below but they don't seem to work. The for section is counting the A's, and it works, it's what comes next that's giving me a headache!
View Replies!
View Related
Summing Values From Array W/ Multiple Conditions-cols
I know there have been many posts about multiple conditions in arrays, but I didn't find one that applied to my situation, so I'm hoping can help me out of jam. I'm using Excel 2000 on XP. I have a database of sales information. Customer name is listed in column C, and columns F through Q contain the sales for the months of July - June (fiscal calendar year), with the headers for the months in row 4. There can be many rows of sales for the same customer, hence the need to sum them. Example C F G H CUSTOMER JULY AUGUST SEPTEMBER customer1 2 3 4 customer1 2 3 4 customer2 2 3 4 customer2 2 3 4 The problem is that this information will need to be updated every month to reflect sales year-to-date, meaning that the conditions for summing the data will change depending on how far into the year we are. So for instance, in August I will need to sum all the records for customer1 in the July column (column F) and the August column (column G), but next month it will have to sum the records for customer1 from July, August, and September (col H). The result of this information would be displayed on a different worksheet. My thought was to assign a range of 12 cells (Sheet2!A1:A12) and to populate those cells with any of the months that need to be summed thus far. So for example, through September, A1 = "July", A2 = "August", and A3 = "September". Then the formula would use those values to evaulate the conditions. So in plain English the formula would: sum the values in columns F : Q where the monthly header = the values in the range Sheet2!A1:A12 for all records where CUSTOMER = CustomerName
View Replies!
View Related
Highlight Row If Cells In Row Meet Multiple Conditions
I have a spreadsheet of actions/tasks. I have a column with the expected completion dates of each action and another column stating whether the action/task is "open" or "closed". I would like to highlight any actions that have gone past their expected completion date and are marked as still being "open". Obviously i dont want any row that are closed to be highlighted. I know the =TODAY()- B1>0 formula will highlight the dates cell that have expired but how do i extend this formula to what i require.
View Replies!
View Related
Function To Return A "true" If Three Values In An Array Match.
I need to figure out how to match three values on the "source info.xls" file attached to the "PFG FILE.xls" that is also attached. In column A in the "Source info.xls" file the formula will need to match the yellow column, then the green column, then the red column. keep in mind that the attached files are just a small subset of data. The "PFG File.XLS" is actually 150K rows long.
View Replies!
View Related
Return Active Cell's Location/row
I'm having trouble identifing a way to return a location for the position of the active cell. I've searched Excel help with "Position, location, return, activecell, etc." and I can't seem to figure this out. I know that it's possible, so that's why I'm on here! ... Ok, say the active cell is currently "F1", and I need the location "F1" to identify the ROW to be used in a formula later, how would I go about that? The current contents of cell "F1"' will be "REPLACE", but I need to change the words "REPLACE" in "F1" and other cells labeled "REPLACE" in column F to the following formula (where the "1" in "A1" is is the current row):
View Replies!
View Related
Looking Up Row Array Data In Column Array
On one sheet (KPI) I have either the values "x" or "" in the range A84:A89 to mark wheter to use the corresponding project in the range B84:B89. On the sheet X-ref I have the same project names in range T4:Y4 and a corresponding target value in T8:Y8 What I want is the sum (or average) of the marked-projects target-values. The result should end up in KPI!G31. In other words I want =sumif(A84:A89;"x";'X-ref'!T4:Y4) but it doesn't work since the first range is an column-array and the second range is an row-array.
View Replies!
View Related
Check Cells In Each Row TRUE/FALSE
I'm trying to assist is working with sensitive data, and for security reasons I am unable to post the Excel sheet here. Here goes: The user is working with a sheet in which uses checkboxes, and wants to assign values from cells in the same row as the checkbox to corresponding cells in the sheet (not a different book) if the box is checked. I guess I should just ask what the best way to accomplish this is? I was thinking I need to do an IF test (do checkboxes return TRUE/FALSE?) and then assign values from the cells I need to corresponding cells in the next sheet. The big question for me using this method: how can I use a single IF statement to assign multiple cell values?
View Replies!
View Related
Interpolation Given A Variable Table Location & Location Of Data Within
I am trying to develop a spreadsheet that will calculate a cost based on a matrix. I am attaching a sample of the calculation created so far. The end result is in cell M13 and is highlighted in yellow. I kind of layed the formula out in a few different cells, so hopefully it would be easy to follow. simplify this process with maybe another formula that I might not be aware of, or maybe show me how to get this done in VB code. I think VB code would be the correct way to go just not sure.
View Replies!
View Related
Insert Row At Specific Location And Auto Fill Formulas From Above
What I need is to insert a row at row 59 and autofill the formulas including drop down list from the above row. This is what I have so far (Thanks to Reafidy and shg). Sub ChkDates() Dim c As Range Dim DelRng As Range Dim ArcRng As Range Dim i As Long Dim l As Integer Application. ScreenUpdating = False Worksheets("Report").Activate For i = 60 To 8 Step -1 Set c = Cells(i, 33) If IsDate(c) Then ..............
View Replies!
View Related
Converting 3x10 Array To A 1X30 Array To Run A Match Formula
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1. Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows? Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet. And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column. I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
View Replies!
View Related
Hide Checkbox TRUE/FALSE & Sum Values Adjacent To TRUE
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX. I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3 I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
View Replies!
View Related
If Cell = True Copy Entire Row To A Dif Tab
If you look at the attached spreadsheet you will see 6 tabs. Main, New Cust, Quote, etc. "Main" will be the sheet that everything is inputted. If there is a "Y" under new customer, I want the entire row to copy to the tab "New Cust". If there is an "X" under quote, struct design, or graphic design I want it under its approp. tab. The Lisa tab should take certain Sales-Person and copy entire row on the Lisa tab. The certain Sales-Persons are BS, PK, PB, PD. Buttons are fine. The "main" page will be getting updated daily w/ new info so after entering new data, i can press the button and it should copy the above to its locations.
View Replies!
View Related
Reference A File Location In A Formula
if this is possible, but is there anyway to reference a file location in a formula using another cell? EG: Cell A2 (Text) = C:Folder1Folder2Folder3Sheet v1.2.xls Cell B2 = =A2'tab1'!$A$1 So, in cell B2 it will use the file location in cell A2. I need this because the values will be updated in Sheet v1.2 and version controlled (so if it changes to 1.3 all you have to do is change cell A2).
View Replies!
View Related
Formula To Calculate Cell Location
i'm not sure how to describe this. i've never had to do this before. here is what i'm trying to do. and it's not working. =MIN(B2:B(G2-G3)) basically instead of saying =MIN(B2:Bx)....i want the "x" to be variable based upong the G2-G3 condition. can this be done some other way?
View Replies!
View Related
IF Formula And If The Result Is True
Is it possible to use the IF formula and if the result is true, to run another formula and if the result is false put a "0" in the cell??? Here is an example... In cell A1, I have an amount of money. In cell B1, I have a quantity. In cell C1, I want to use the following IF formula: =IF(B1>0;((A1)*(B1)*0.15);0) At the present time, when I do this, when the result is true, I see ((A1)*(B1)*0.15) in the cell instead of what that formula should give.
View Replies!
View Related
How Do I "SUMIF" Multiple Conditions Are True
I'm trying to sum the values in a column if 2 different conditions (in 2 other columns) are true (so I'm evaluating 3 columns total). For example, if I had a list of the prices of all the cars available at a dealership (each car listed on a different row), and I wanted to find the total cost of all toyota celicas listed, how would I do this? Basically, I'm trying to create a formula that says "if the value in the make column = toyota AND the value in the model column = celica, then sum the related values in the price column."
View Replies!
View Related
Copy Formula Result As A True Value
Is there a way to copy a formula result as the actual value and not the formula, I can do copy and paste using "value" option but would like an automated formula or code option if possible. In the example, D4 copies C4, would like D4 to show "AB" and not the formula "=C4"
View Replies!
View Related
Formula For Parsing If An Element Is True
My rows consist of the following cells, an author(s), an article name, a pubilcation name, a volume number, and a page number. There are thousands. My first column has multiple names and need to separate the names into separate cells. Some names have a comma or semi-column separating them, some have the word "and" separating them. Most of the names are listed as last name, first name. (Some are not and I will have to deal wtih that later.) Row 1: Eisenhofer, Jay W., Jordan, Kirk S. Tucker, Marc B."Business Faces Harsh Sentencing Penalties",Delaware Business Review, October 7-13, 1991951 Row 2: Embley, Craig M., Turezyn, Andrew J. and Welch, Edward P."Recent Developments in Delaware Corporate Law",S.A.S.M.& F., May, 19901443 I'm sure is a multiple part process. Is there a formula for placing anything separated by a comma into a new cell, or placing a tab between the names? Ultimately this data will be placed in database from which to search for a name and article, etc.
View Replies!
View Related
Formula For True/false Tolerance Percent
I need to be able to get a true/false from a tolerance percent. Here is an example of what I am trying to do cell a2 is Nitrogen cell b2 is (Known gas%) 2.4800% cell c2 is (unknown gas%) 2.4963% cell d2 is =b2-c2 and I get the answer no trouble there. what I need is to take the answer in cell d2 and set a plus/minus 2% tolerance in cell f2 and get a true/false comparison.
View Replies!
View Related
Return True/False If Cell Contains Formula
Is there a formula or VB code like the =TYPE() function that will return whether a cell contains a FORMULA? Here's the issue: I'm writing a macro to update 10,000 sheets. Each sheet has a column that I'm updating with a new formula. Some of these formulas have been previously overwritten with a random number that would delete the formula from the cell. I have to leave the overwritten values where there is no formula, and replace the values of the formulas where they are still intact. I assume that if I can identify whether there is a formula in the cell or not, I can choose that cell to skip or update.
View Replies!
View Related
Macro/formula To Count Distinct Resources And Match To Location
i am looking to create a small table from the attached worksheet that will show how many users there are for 3 different locations, the user names are in column a and the locations in column c. the thing is, the actual worksheet i am using in work contains almost 1000 lines, and is being updated daily, there can be multiple entries for a person for projects etc.. and someone can even be in the availability and pto area's without being in the main project area. each resource can only be on one location so that will not change. also, there can be blank cells for resource which should not be counted. i was wondering if there was a formula or a macro that would count the distinct number of names and reference them to the location and give a count of resources by location?
View Replies!
View Related
Using Array Variable Instead Of Array Formula
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it in writing so that i accurately describe my problem. attached is my example
View Replies!
View Related
Conditions To Sum Every Other Row
Although I am not getting any errors, I am not having success returning proper answers with the formula below. Perhaps I cannot do what I am attempting. =SUMPRODUCT(IF(AND($K$22:$K$169="A&B",YEAR($G$22:$G$169)-YEAR('Info'!$F$9)=0),(MOD(ROW($R$22:$R$169),2)=0)*($R$22:$R$169),0)) where: K22:K169 are user entered categories from a drop down list G22:G169 are user entered dates F9 is a user entered update date column R are monetary values with first row being a revenue$ second row margin$ I need to summarize every other row (one row is revenue, one is margin) if the two conditions are met.
View Replies!
View Related
Insert Row If In Between The Conditions
I am trying to insert a row after the days that meet the following condition in Column I. I want a row inserted inbetween 120 and 121, 90 and 91, 60 and 61, 30 and 31,15 and 16, 0 and 1. I only want these rows to be place after the last of those numbers being there can be multiples of each and range from A to F. I have tried a number of different things with no success.
View Replies!
View Related
Copy Row With Multiple Conditions
I am attempting to come up with code to copy a row only if columns K:Z are all blank in a row. I tried using thirteen if statements (it was a messy code) and then using a search code with a For/Next statement and none of them are working. They copy the rows but something keeps bugging no matter how I change them.
View Replies!
View Related
IF Statement With Conditions: Start From Row 21
In the table I've created, I have a column (column A) that contains "Y" for the first 20 rows. I'd like to use an if statement in another column (column B) to create a numbered list starting with the first row (from column A) that is blank. For example, if column A contains "Y" in the first 20 rows, I'd like starting in row 21 (in column B) to return a value of "1" and then have the subsequent rows increase in value by 1, so row 22 would be "2", row 23 would be "3" etc. The catch is, if for some reason I make a change in column, let's say extend the "Y"s down to row 25, I'd like column B to reflect those changes by starting the list in row 26.
View Replies!
View Related
Copying Into Another Row If Conditions Met
What I'd like to do is to create a loop that will run through the cells in column B and change the values in column A to the value in column B IFF the current cell in column B does not equal "#N/A" AND the cell above the currently selected cell in column A contains the text "Manhattan". The code should run through each row and the data from the cell in column B if the above conditions are met will be copied into the cell in column A on the same row;
View Replies!
View Related
Row Copy To New Worksheet With Conditions
I had attached the excel sheet below. I need to have a macro which will be able to help me to deliver the result ( as attached) as per the raw data (as attached ).I have been cracking my head as there are more than 1000 item for me to be sorted by me daily and several reports with almost the same issue. description-i will need worksheets to be created for each of the available status on the report and have all the details to be pasted accordingly to the status.this is meant for excel 2003.
View Replies!
View Related
Finding Row Number Within Range With Conditions
In the screen shot I'm trying to find the row number where a particular price of an order has been reached. In this case, for the first order, my execution price is 1.8859, my stop loss is 1.8834 and take profit is 1.8884. I need to look and the future prices to determine which event had occured first (either the take profit or the stop loss). I though by using row numbers I would compare and which ever is smallest would mean that it occured first - the profit/loss is then calculated. The other caveat is that an exact match may not always be available - for example, the second trade is stoped out because the highest price for the 12:35 timeframe exceeds the value I'm looking for. Still it would have triggered a stop loss. ******** ******************** ************************************************************************>Microsoft Excel - Misc.xls___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutH6I6J6M6H7I7J7M7H8I8J8M8I9J9M9I10J10M10I11J11M11I12J12M12= ABCDEFGHIJKLM3DateTimeOpenHighLow*Order*PlacedOrder*PriceStop*LossTake*ProfitStop*Loss*Row*#Take*Profit*Row*#Profit/Loss42006.11.1512:001.88651.88661.8863*N***these*are*the*cells*that*need*the*formula*52006.11.1512:051.88651.88661.8856*N******62006.11.1512:101.88591.88591.8857*Buy1.88591.88341.88841080.002572006.11.1512:151.88581.88591.8853*N*...............
View Replies!
View Related
Nested If's Or How To Check Multiple Conditions In A Row
I have the data in this form YYY NYY NYY NNY NYY NNY NYY NYY NYY NYY YNN NNY NNN NYY The output should check two conditions. If all three columns are "Y" then it should return value "Y". If any two columns are "Y" then it should return value "Y". or else it should return "N". Then the output should look like this.... The output column is colored in Red..........
View Replies!
View Related
Using VBA To Select A Row And Colour Code It Based On Conditions
I've had a look through the forum and can't see an answer, so apologies if I'm duplicating something! I have a spreadsheet where column O has five conditions: 1 PO in 2 High Probability 3 Medium Probability 4 Low Probability Blank I need to colour code the whole row based on the value in the cells; if there were four conditions, I could do this with conditional formatting, but with five (with white as the fifth condition), I need to look at VBA. However, I'm having difficulty colouring the whole row; how do I do this? e.g. what I need to do is: If O2 = "1 PO in"; Select A2:T2; Colour green In addition, I need to ensure that if there is no data in column D, but column O is "1 PO in", it is highlighted in a separate colour. I have a macro for that, but don't know whether in needs to be put into the code before or after the macro needed above...
View Replies!
View Related
IF Formula For Multiple Conditions
I need to set up something like an IF formula that will populate 1 cell based on which of 11 possible values will be represented in another cell. I can do this up to 7 with no problems using the following IF statement: = IF(G23="1","a", IF(G23="2","b", IF(G23="3","c", IF(G23="4","d", IF(G23="5","e", IF(G23="6","f", IF(G23="6","g",IF(G23="7","h", "OTHER")))))))) But if I try to put more than 7 conditions in there it tells me I've entered too many arguments. Is there a way I can either use more than 7 arguments or some other formula
View Replies!
View Related
|
TRACKER
