i'm not sure how to describe this. i've never had to do this before. here is what i'm trying to do. and it's not working.
=MIN(B2:B(G2-G3))
basically instead of saying =MIN(B2:Bx)....i want the "x" to be variable based upong the G2-G3 condition. can this be done some other way?
Is there a standard way across all Excel formulas to have the cell location returned rather than the value of the cell itself?
In other words A33 instead of "52" (with A33 being the cell that contains "52")
=MIN(IF(B3:B32="",IF(A3:A32>0,A3:A32))) ArrayedOldest Date Array.xlsx
Following on from a previous post need to add to my (forums) array.
I need to find the location of a date which has been looked up in a cell based on the above formula which is in the attached.
i need a formula for which calculate all cell (calculating years months and days formula). FIND ATTACHED .xls file i need a answer in cell highlited in yellow color.
View 3 Replies View RelatedI have a file wiht 2 sheets, on one sheet I have a macro that opens 25 other excel files and pastes information into the sheet in a specific order. Then on the "main" page I have different calculations based on the information from the other sheet.
The Information is listed in a row so for example B2:M2 or B3:M3. If a value has not been assigned the vcell will be empty (No formula or anything, completely empty)
The Value in the cells will be between 0 and 100 (its a score from 0-100) so in the "main" page I want a formula that calulates the LATEST score (It will always be the first one on the furthest left and the latest one to the furthest right). Is there any easy formula to calculate this?
For example:
----B-----C-----D-----E-----F-----G-----H-----I-----J-----K-----L-----M
2|-10----30----75----85----93----12---12
So in the example I2:M2 is empty so the latest score would be H2 so thats the value I want to show on the main page.
Is it possible to use a formula to calculate a cell reference within a formula? e.g. is there some way I could reference cell C47 in a formula by saying C(40+A2) where A2 contains the value 7. I often want to sum a certain number of cells in a list, from the first one to the nth one and need to be able to calculate rather than hard-code n.
View 5 Replies View RelatedI have a row of data starting in cell E4 that could, theoretically, go to the far right end of the spreadsheet. I need to enter a formula in cell D4 that calculates the average of every other cell in this row, starting with E4, that is E4,G4,I4,K4...
View 9 Replies View RelatedI need a formula which can calculate row 60 for blank cell. If true then apply another condition which checks whether or not the cell above the row 60 up-til row 50 has any bold fonts or not. If true then show True and if false, show False in cell J1.
View 1 Replies View RelatedI only want the formula to operate when there are values to calculate and then ONLY refer back to the last calculation. If there are gaps between the calculations I would like those to remain blank. Is that possible?
I have attached an example of what I am trying to do.
I am trying to develop a spreadsheet that will calculate a cost based on a matrix. I am attaching a sample of the calculation created so far. The end result is in cell M13 and is highlighted in yellow. I kind of layed the formula out in a few different cells, so hopefully it would be easy to follow.
simplify this process with maybe another formula that I might not be aware of, or maybe show me how to get this done in VB code. I think VB code would be the correct way to go just not sure.
if this is possible, but is there anyway to reference a file location in a formula using another cell?
EG:
Cell A2 (Text) = C:Folder1Folder2Folder3Sheet v1.2.xls
Cell B2 = =A2'tab1'!$A$1
So, in cell B2 it will use the file location in cell A2.
I need this because the values will be updated in Sheet v1.2 and version controlled (so if it changes to 1.3 all you have to do is change cell A2).
Basically a cell might have a number with 3 decimal places
For Example 90.554, and i will format the cell two 2 decimal places. But when i use those cells which are formated to 2 decimal places in a formula it produces results based of all the decimal places in that cell.
Is there a way for the formula to only calculate the results based off of what is shown in the cell? . This is messing up our accounting area by alot of dollars since we sell many items.
I included an example of what i mean in this excel file which should clear up any confusion.
I have a code and I want to run this macro whan a specific cell change (which has sum formula) and this code also has some calculation. And I m not understanding to overcome this problem through Calculate event.
View 2 Replies View RelatedI currently have a spreadsheet that refers to a different spreadsheet, with different expenses each month, with the months going across from A,B,C,D etc.
Because the formulae on the expenses sheet refers to cells such as O13 O15 O27 etc, at the start of the next month the 'O' has to be changed to a 'P' to give P13 P15 P27
This doesnt sound much but there are over 10 different spreadsheets that are all currently changed manually. Is it possible to have a function referring to a cell containing 'O' which when changed to 'P' changes all the formulae to refer to the cell next to the original.
EG Instead of O13 it would be [variable]13
Essentially this will mean that a master sheet will be able to change all the excel spreadsheets in one go.
My formula below work perfectly. I was wondering if their is a way for me to idenify the location of each row in which all the conditions are true. So, for example, if the formula generates an answer of 2, in a different cell it would give me the address of the 2 rows.
=SUM((K9:K72/L93))-SUM((K9:K72/L93))
i am looking to create a small table from the attached worksheet that will show how many users there are for 3 different locations, the user names are in column a and the locations in column c. the thing is, the actual worksheet i am using in work contains almost 1000 lines, and is being updated daily, there can be multiple entries for a person for projects etc.. and someone can even be in the availability and pto area's without being in the main project area. each resource can only be on one location so that will not change.
also, there can be blank cells for resource which should not be counted. i was wondering if there was a formula or a macro that would count the distinct number of names and reference them to the location and give a count of resources by location?
I am looking for a way to show the character location number of a text file, possibly in the first row or a macro that I can run at any given location that will give me the location # I am currently viewing.
Currently, when I open the file I can see the character # at the opening screen (see attached file) but they disappear when it actually converts. I would like to be able to keep the character location ruler once the file is opened in Excel so I don't have to manually count.
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
I have a worksheet size roughly 100 * 400 cell. there is roughly 100 cells filled with RED color and with different value.
When i used FIND ALL format - RED, I can locate the cell location and the cell value. And I wish to copy these 2 info onto a new sheet so that on the new sheet, I can create a hyperlink and easily access to the location of the RED cell.
However, in FIND and REPLACE, i have a list of results on what I want. But i cannot copied the information out. So is there anyway to copy it out or to achieve what i want?
For eg.
RED value
cell
50
A3
87
D71
251
AQ5
and so on.
I am creating a macro to automate data analysis for work, but I've become stuck.
I need to find the coordinate of the first cell in a column with word "reserved" or "extended" contained in the cell, and then assign the row number of that coordinate as a variable to use for moving data around. Basically, I want something like VLOOKUP, but instead of returning a value, I want it to return the coordinate.
I've sent out a survey asking people to sign up for one of two groups, A or B. I have a table with a long string of responses, with the name in column A, and in columns B or C there is an X that shows whether they have chosen Group A (column B) or Group B (column C)
I am trying to write a bit of code where it would paste the names into a new table with the headers Group A and Group B. Here is what I have pieced together so far:
Sub Create_Groups()
For i = 2 To Range("B2").End(xlDown).Column()
If Range("B" & i).Value = x Then
[Code].....
Is there any way to use the offset formula in reference to the location of another cell?
Here is a simplified version of my problem:
Sheet1!A1 refers to Sheet2!A1.
Sheet1!B1 refers to Sheet2!D1.
Sheet1!C1 refers to Sheet2!E1.
Is there any way that I can say that Sheet1!A1=Sheet2!A1 and then use the offset formula based on the location referenced in Sheet1!A1? The cells being referenced are merged cells one column wide and varying rows long, so there is no real pattern to follow except that the corresponding cells (the ones that I want to use the offset formula on) are all taking up the same amount of rows and are an equal amount of columns over (Sheet1!B1 refers to 3 columns over from Sheet2!A1, Sheet1!B1 refers to 4 columns over from Sheet2!A1). The spreadsheet is a fairly complex one and it would be much cleaner and less likely to have any mistakes if I was not referencing each cell individually.
I have received a spread sheet with all the data in column A. It follows the format of A1 = Name, A2 = Email, A3 = Name, A4 = Email, etc. for over 800 entries. What I need to do is etract all the email addresses and place them in column B alongside the Name. I don't have any experience with Makros and tried to use one but kept deleting the wrong data.
View 5 Replies View RelatedI have a row b1, b2, b3, b4, b5 etc. I need to change it to c1,,c2,c3,c4,c5 etc. Is there a fast easy way to do it. I know about $ but I'm past that.
View 6 Replies View Relatedi am trying to find the location of the current cell and use the information to print it to screen. For example, if the cell A1 is selected, i need to get the location A1 and use this value for a vlookup. is there a method that returns the current cell location "A1"??
activecell.address
I would like to how I can move the words "Total List Price" over to column "C" rather than have it displayed in column "A". If someone can please advise me as to what part of the code I must change in order to have these changes take place
Private Sub CommandButton1_Click()
Selection.SpecialCells(xlCellTypeFormulas, 16).Select
Selection.ClearContents
Range("A8").Select
Selection. Subtotal GroupBy:=1, Function:=xlSum, TotalList:=Array(6, 9), _
Replace:=False, PageBreaks:=False, SummaryBelowData:=True
Application.Goto Reference:="models2" ....................
I have a column full of data like the below with relevant data on the same row.
I wish to locate the cells which have a specific section most importantly without the "cartridge only" so for example with the below
Word Academy (Nintendo DS)
Word Academy (Nintendo DS) (Cartridge Only)
This would show 2 given there are two with the specific text "Word Academy (Nintendo DS)" there will always be a cell without the (Cartridge Only) part so for this the formula =COUNTIF(D:D,"*" & D1 & "*") seems to do the job to simply count the cells with that in however I do not wish to do this.
What I need to do is locate the cells that have this in but match them together in a large sheet so basically I somehow need to be able to locate the two corresponding cells which both have one of the cells values of "Word Academy (Nintendo DS)"
The cells have data in the row which I need to tie together to create a total value.
For example
Title Qty
Word Academy (Nintendo DS) 5
Word Academy (Nintendo DS) (Cartridge Only)6
I need to locate the all the cells with "Word Academy (Nintendo DS)" in which would mean just the two cells "Word Academy (Nintendo DS)" + "Word Academy (Nintendo DS) (Cartridge Only)" in the above instance but I need it to then see the cell which has that in its title and add the quantity of the two together leaving me with the below
Title Qty Actual Qty
Word Academy (Nintendo DS) 5 11
Word Academy (Nintendo DS) (Cartridge Only)6 11
Which is basically just adding together the quantity shown on the spreadsheet in the rows with the containing text "Word Academy (Nintendo DS)" and as "Word Academy (Nintendo DS) (Cartridge Only)"
On the attached spreadsheet Column L is an example of the result I would be desire, I have put a basic =sum formula in to just represent the value it should be showing.
I imagine this is pretty simple but for the life of me I can't figure it out. Here's what I want to do...
Find MIN in Column F
After finding the MIN in F (let's pretend F222 is the current min)
Show the text in the field next to it (in this case display text from E222)
I'm having trouble identifing a way to return a location for the position of the active cell. I've searched Excel help with "Position, location, return, activecell, etc." and I can't seem to figure this out. I know that it's possible, so that's why I'm on here!
...
Ok, say the active cell is currently "F1", and I need the location "F1" to identify the ROW to be used in a formula later, how would I go about that?
The current contents of cell "F1"' will be "REPLACE", but I need to change the words "REPLACE" in "F1" and other cells labeled "REPLACE" in column F to the following formula (where the "1" in "A1" is is the current row):
I've been searching for ages trying to work out how to do this but have so far only managed to confuse myself. i have office 2007 and I have found some code to convert an excel sheet to PDF, however I need it to saveas the contents of cell (e6) and save to a location on our network drives (C:TEMP).
View 2 Replies View Related