I have the following array formula that identifies the first number in the column I:
=INDEX(I1:I1200,MATCH(TRUE,ISNUMBER(I1:I1200),0))
This formula works fine however I was hoping to expand the range to the entire column. I thought (obviously incorrectly) that the following formula would work:
=INDEX(I:I,MATCH(TRUE,ISNUMBER(I:I),0))
Instead of getting the same result as the first formula, I am getting "#N/A".
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
In sheet 1, I have
Col A Col B
John Sedgwy - R
In sheet 2, I have the following names
Col A Col B
Peter Walker
John Sedgwicky
When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}
gave me an error but when I did an individual match to both John and Sedgw, it works.
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
Imagine 5 periods of sales, growing by $550 per year, from $250 to $2,250. There is a columnar table with sales in increments of $500 to $2,000 paired with margin percentages.
Using INDEX(MarginColumn,MATCH(Sales,SalesColumn,1)) successfully retrieves the correct margin % for each period where Sales is that year's sales.
So, I tried to construct an array formula in the following way:
{=SalesRow*INDEX(MarginColumn,MATCH(Sales,SalesColumn,1))}
Sales is not changing, so that only the 1st year's margin percentage is being applied to each year's sales. I confirmed this by extending the array to a multi-cell layout.
How can I correct the formula so that the margin percentage is looked up as if it were using each year's sales independently? I know I can just SUM the array once this works, but this is my current road block.
P.S. If you see this answer immediately, how might I multiply the percentages by the sales that increase by $500 and sum the whole expression into one cell?
complex formulas in Excel but managed to work out and create the following formula;
{=IFERROR(INDEX('owssvr(1)'!$AE:$AE,MATCH($A9&AK$1,'owssvr(1)'!$C:$C&'owssvr(1)'!$E:$E,0)),"")}
Basically I want to return a call quality score if the name and week match my criteria.
The above formula works perfectly, however, it is very slow and the sheet takes ages to update.
Is there a quicker and more dynamic way to achieve the same result?
I'm tryig to find a way to index data in an array that meets certain matching criteria. I am looking for an employee's rate on a given day by searching a database that lists the dates that an employee's rate was changed. I was hoping to solve it with a crafty index and match array formula but have been unable to find something that works so far. I have attached a simplified example of what I am trying to do.
View 3 Replies View RelatedI'm using the following formula to look at a range of cells and return the most common text entry. The formula works fine as long as there is text; if there are more blank cells than entries, then it returns a 'blank' and my formula cell is empty. How to clean this up so that it ignores blank cells?
=INDEX(C2:C11,MATCH(MODE(COUNTIF(C2:C11,C3:C11)),COUNTIF(C2:C11,C2:C11),0))
I need to find a way to find an array in a tab to use for an index/match function I have.
this is what i would normally use: =index(tab_array,match($a2, tab!$a$1:$a$1000,0),match($B$1,tab!$a$1:$zz$1,0))
This formula would usually work fine when I know that within the tab, the array in which the row match is searching doesn't change. However, that array may change in the future, to say column H, without my knowing as it is a database that gets automatically populated from an upstream system.
Is there a way to search for an array within an index/match?
I am trying to understand how to use index and match in an array formula. Probably easiest to take a look at my example sheet. For some reason, the first result is working, but the others aren't.
[URL] .....
Alternatively, here is a screenshot.
Uploaded with ImageShack.us
The formula I have tried is: =INDEX($E$3:$E$11,MATCH(1,IF($A$3:$A$11=G3,IF($B$3:$B$11=H3,
IF($C$3:$C$11=I3,IF($D$3:$D$11=MEDIAN(J3,K3,$D$3:$D$11),1,0) ,0),0),0),0))
confirmed with ctrl shift enter.
I am trying to run an array formula to match two dates on two seperate sheets as close together based on another cell. Below is what I currently have on some made up values. I am entering it as an array and ideally I would like it to run down the cells changing the reference A2 depending on which cell it is then to then enter this into a macro.
The formula I am currently using is:
=INDEX(Trees!B$2:B$75,MATCH(MIN(INDEX(ABS(IF(A2=Trees!A$2:A$75,(Trees!B$2:B$75-B2))),0)),INDEX(ABS(IF(A2=Trees!A$2:A$75,(Trees!B$2:B$75-B2))),0),0))
Sheet 1 (Named: Main)
Number
Date
Formula
1
15/06/2012
[Code] ....
Sheet 2 (Named: Trees)
Number
Date
1
05/06/2012
[Code] .....
I have a number of array formulas that refer back to the table in the top left. The array formulas are in Columns I and L, and cells N200, N203, and P203.
Normally when I add a new line to the top left table (usually by clicking on the empty box below the previous final line and typing the date), the table expands by one row and the array formulas all adjust to match, i.e. all the A180/C180s in the formulas become A181/C181s, etc.
However every once in a while (maybe once a month), the arrays simply refuse to update, and I can't figure out why. When they fail, they all fail, it's not hit or miss. You'll see in the attached sheet that though I've added a line to the table (A181) and data to that line, all the arrays still read through A180/C180.
Why this randomly fails to update, and if it's something I'm doing incorrectly?
And that leads to an associated question. In the past when this has failed in this manner, I've laboriously gone through and changed all the cell references manually, in every single individual cell. (After doing it once, the arrays usually magically start auto-expanding again.) I'm certain there is a way to make those formulas refer to a named range, instead of all being manual references, but after spending an hour on it, I keep getting #VALUE errors.
I've been using [URL] ..... and pages like it as a reference without success. Obviously, I would prefer that the formulas auto-update without issue per my first issue above, but in the event that they don't, it'd be really nice to just change the ranges in one location and have that propagate across the sheet.
The short version:
(69.1*SQRT(((Shops!$X$2:$X$341-C3)^2)+0.06*((Shops!$Y$2:$Y$341-D3)^2))<=25))) evaluates out to series of 340 True and Falses. I need to be able to pull the nth True, and then somehow index that against AH2:341.
I'm working with a record of 53,000 entries with latitudes and longitudes and I need to cross compare them with 341 locations in the United States.
I've already done some of the heavy lifting, which supported narrow an initial list of 85,000 records to at least recognize which records where within any of the 341 points. (Less arrays makes my computer happy.)
This formula gives me the count of locations each entry is within one of the 341:
=SUM(IF(69.1*SQRT(((Shops!$X$2:$X$341-C3)^2)+0.06*((Shops!$Y$2:$Y$341-D3)^2))<=25,1,0)) {CSE} & copied down 53k times
The actual return range is AH2:AH341 for the location number.
Now, I need to be able to list each of the 341 they are close to. The max count is 17, so I'll only need to list out 17 columns.
Maybe something like =LOOKUP(1,1/(69.1*SQRT(((Shops!$X$2:$X$341-C3)^2)+0.06*((Shops!$Y$2:$Y$341-D3)^2))<=25))),$AH$2:$AH$341)
but this only returns the first match. How do I return the 2nd, 3rd, 4th, etc?
Because of the sensitive nature of my data, we can use a much simpler array which I'll adapt; I'm mostly trying to understand the logic or formula that should be used.
Return Nth Match.xlsx
column A
MARY
JOHN
MARK
SUE
cell B1
zzzJOHNxx
I am looking for a formula (Vlookup, Match, etc) that will look for an entry in column A that matches part of the string in cell B1 (not the other way around i.e. using wildcard)
If I have to match MAX from Row 1 and MIN from Row 2 and get the EXACT MATCH as well as more than 1 Match?
I have 3 Rows and 4 Column Matrix
from A1 till D1 contains values as 10,20,50,40
from A2 till D2 contains values as 30,20,10,40
from A3 till D3 contains values as TOM,****,HARRY,JONES
THen my answer would be HARRY, however if there are more such combinations present then I would require a list of all of them.
Ex2 For Multiple Lookup
from A1 till D1 contains values as 50,20,50,10
from A2 till D2 contains values as 10,20,10,40
from A3 till D3 contains values as TOM,****,HARRY,JONES
What would be the best approach/funcvtion to use in excel if I had an array of variables and wanted to match them?
E.g.
1,2,3,4,5,6,7
I would like to lookup up a column and if either of these numbers are in that row to say "yes otherwise "No"
I matching up some ip numbers against some ip ranges and I'm finding I can only use the wildcards in the first argument and not the second array argument. Is that the case? Here's my files:
IP_List
141.188.146.000 =match(A1,IP_Range!A:A,0) Doesnt work
156.140.216.202
IP_Range
141.188.???.??? =match(A1,IP_List!A:A,0) works
I really need the first case to work (looking up an ip in the ip range). Is there a way to do this?
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
=INDEX('Data Dump'!$C:$C,MATCH('YTD Detailed'!B$2&A40,'Data Dump'!$G:$G&'Data Dump'!$D:$D,0))
I have to above array formula, i am looking to nest an offset within it. That looks up two columns to the right, but im having trouble.
Can an offset be added to an index?
I created an Index/Match array forumula in the worksheet. It works.
View 2 Replies View RelatedI'm trying to lookup XYZ plc in an array where the company names in col A are like XYZ plc (UK, London), ABC plc (Boston US) and I want the lookup to return a date in column 3. I've tried VLOOKUP(B2, LEN(LPR), 3, FALSE) where B2 is the cell holding XYZ plc and LPR is my array and it's not working.
View 2 Replies View RelatedI am trying to replicate the following code using Cells references so that the row can be made a variable. I basically want to make the search array smaller with each loop.
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range("B3:B250"), 0)
The above works, the following two variations don't:
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range(Cells(ArrayStart, 2), Cells(250,2), 0)
LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range("B3:B250").Item(ArrayStart, 2), 0)
with a multiple criteria index match array!
I have attached an example where I need to bring back a result matching 4 specific criteria, but I cannot seem to get it to work at all!
I have attached an example dataset with the formula that I was trying to get right (and failing miserably!!)
Cell P14 = 4.7
My array is H42:N72, in H42:H72 I have numbers 15,14,13....0,-1,-2,-3, etc...
In N42:N72 there is a corresponding $ amount that I would like to return based on finding the value which is greater than 4.7 (so, looking to match the $$ amount to the number 5 in column H42:H72)
I've tried using INDEX MATCH but can't figure this out.
Solution for all: {=SUMPRODUCT(SUMIF(Sheet1!$A$2:$A$16,$F$34:$F$40,INDEX(Sheet1!$B$2:$K$16,0,MATCH(T$10,Sheet1!$B$1:$K $1,0))),U34:U40)}
Say I have an Excel workbook with two sheets: Employee Hours and Employee Wages. On the Hours sheet I have 31 columns (Jan1 - Jan31) with inputs for the number of hours worked by each employee by day. On the Wages sheet I have listed the same 31 columns with their wages each day (I do this to factor in wage increases that occur fairly often).
My goal is to use an INDEX/MATCH function to calculate the total daily compensation for each day on the Wages sheet by multiplying hours*wages for all employees that day. Here's the code I'm using:
Why this formula code:
Code:
=INDEX(INDIRECT($A$3&D7&$A$4),MATCH(B7, INDIRECT($A$3&D7&$A$5),0),5)
Where A3 D7 and A4 concatenate to form a workbookname!named range1 and equally A3 D7 and A5 form workbookname!named range2 works perfectly well for a fixed range as named range, but not if the named range is dynamic using the typical OFFSET, COUNTIF method?
I need to be able to concatenate the range reference in this way, but for the named range reference to be a dynamic range that will grow and change with additions etc.
The context of this problem is that I am pulling sales data from different outlets to analyse monthly sales. The data from the various outlets are in various formats and the products, even though they are the same throughout all the stores, are named differently. For example, Mushroom Soup can be named as "Soup Mushroom", "Mushroom Soup" or "Cream of Mushroom". This makes analysis really tough.
I first created a table with a list (K6:P6) that had the varying names of the products. This is shown as the first table with 3 rows.
Then I tried to match this list to a range of products sold by an outlet e.g. Electric. (shown in the next bigger table $D$10:$D$254, ) Next, I used Index to call up and display the sales of that product next to table with list A ($G$10:$G$254)
This works for some entries but not for all. I get mostly #NA answers even though I do ctrl-shift-enter. Also, the bigger table is in a separate file and I am using excel 2010.
=INDEX('[GON-JUN 2012.xls]gon-jun'!$G$10:$G$254,MATCH(K6:P6,'[GON-JUN 2012.xls]gon-jun'!$D$10:$D$254,0))
[URL]
I've tried using a Pivot Table, a Match Array V-Look Up formula I found on here (and can't seem to find anymore) that I altered to fit my cell needs, and even implemented RP-Excel.
This is an example of what I have:
Box
101
101
102
102
102
[Code]...
This is an example of what I'm trying to do:
Box
101
102
103
104
[Code]....
Additional challenges:
The actual workbook is over 4,000 rows long with a lot of various other information in neighboring columns.
The dates represent each time a specific box was filled. Some boxes only filled once, some up to 14 times. I only want up to the first five fills.
Able to try any of the following, or combinations of: Formulas, Pivot Tables, VBA, RP Excel
How to do INDEX MATCH ARRAYS. (to populate my report I need to match multiple rows and columns from source sheet to import data).
Now I am trying to replicate same in VBA. (for this example row1&2 & column1&2 on both seed(source) and result(one I am trying to populate) sheets).
I wrote the code below that works just fine for 1 CELL.
Sub Button1_Click()
Range("C4").FormulaArray = "=INDEX('SEED'!$A$1:$f$6,MATCH(A4&B4,'SEED'!$A$1:$A$6&'SEED'!$B$1:$B$6,0),3)"
End Sub
I know in excel I can simply drag the formula across rows/columns to populate them automatically and the way I would do this in VBA would be by creating loops.
Here is what I have that needs improvement
Sub Button1_Click()
Dim iRow As Integer
For iRow = 3 To 4
Range("C" & iRow).FormulaArray = "=INDEX('SEED'!$A$1:$f$6,MATCH(AiRow & iRow,'SEED'!$A$1:$A$6&'SEED'!$B$1:$B$6,0),3)"
Next iRow
End Sub
Here iRow is to identify row number, and to keep simple I am only doing 2 rows. but how do i write MATCH statement to identify rows needed to be matched from SEED sheet?
Here is the table I am working with
Date
Open
High
Low
Close
Volume
Adj Close
Semi-Annual Yield
Theoretical Bond Price
Index
Coupon
Total Value
Peaks
Troughs
[Code] ..........
The Relevant columns would be "Date" column A cell 1, "Total Value" column L cell 1, "Peaks" column M cell 1, and "Troughs" column N cell 1. What I basically want to do, in the next column, column O, is this: If cell N# = "Trough" find the previous M cell = "Peak" and take the L cell in that "Peak" row and subtract the L cell in the Trough row from it (like =(L4-L9)/L4)). Then in column P, if the percentage drop was 5% or greater, I want to find the days between the trough we are looking at, in cell n10, and the NEXT Peak, cell M11, using the corresponding dates in Column A.