Match 2 Criterias In An Array?

Jan 7, 2009

If I have to match MAX from Row 1 and MIN from Row 2 and get the EXACT MATCH as well as more than 1 Match?

I have 3 Rows and 4 Column Matrix

from A1 till D1 contains values as 10,20,50,40
from A2 till D2 contains values as 30,20,10,40
from A3 till D3 contains values as TOM,****,HARRY,JONES

THen my answer would be HARRY, however if there are more such combinations present then I would require a list of all of them.

Ex2 For Multiple Lookup
from A1 till D1 contains values as 50,20,50,10
from A2 till D2 contains values as 10,20,10,40
from A3 till D3 contains values as TOM,****,HARRY,JONES

View 4 Replies


ADVERTISEMENT

If Two Criterias Match, Value Should Show As 1

Aug 27, 2009

If column A is greater than B and column C is blank then Column D should show value as 1.

ABCD
15121


Similarly if column B is greater than A and column C is blank then Column D should show value as 2.


ABCD
12152

Can I put both the formulas in one column so that I get the value as 1 or 2?

View 4 Replies View Related

Index And Match With 2 Criterias/conditions

Jan 12, 2007

Need to kown if Index and Match can be used if you have to criterias. Below is a glimse of my sheet. The data does come from 2 sheets, I don't know if that is another reason, doubt it, but needed to tell you just incase. I have sales information and I just want a quick view of the sales by associate by date. My 2 condition are the associates id# and the date.

=INDEX(($J$2:$Q$4),MATCH(AND($A2,C$1),AND(N2:N4,M2:M4),0),9)

my range is from J2:q4, my criteria is column a2 Sales asso Id and C1 the date, and match is N2:N4 & M2:M4, witch is the 9th column.

View 9 Replies View Related

Converting 3x10 Array To A 1X30 Array To Run A Match Formula

Apr 7, 2009

Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.

Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?

Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.

And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.

I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.

View 6 Replies View Related

Array Match Formula Fails But Simple Match Works?

Feb 5, 2014

In sheet 1, I have

Col A Col B
John Sedgwy - R

In sheet 2, I have the following names

Col A Col B
Peter Walker
John Sedgwicky

When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}

gave me an error but when I did an individual match to both John and Sedgw, it works.

View 4 Replies View Related

Index Match Array New Formula Not Array?

Nov 6, 2013

Is there anyway to recreate this formula w/o it being an array ?

{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}

View 5 Replies View Related

Return Nth Match In Array

Dec 20, 2013

The short version:

(69.1*SQRT(((Shops!$X$2:$X$341-C3)^2)+0.06*((Shops!$Y$2:$Y$341-D3)^2))<=25))) evaluates out to series of 340 True and Falses. I need to be able to pull the nth True, and then somehow index that against AH2:341.

I'm working with a record of 53,000 entries with latitudes and longitudes and I need to cross compare them with 341 locations in the United States.

I've already done some of the heavy lifting, which supported narrow an initial list of 85,000 records to at least recognize which records where within any of the 341 points. (Less arrays makes my computer happy.)

This formula gives me the count of locations each entry is within one of the 341:

=SUM(IF(69.1*SQRT(((Shops!$X$2:$X$341-C3)^2)+0.06*((Shops!$Y$2:$Y$341-D3)^2))<=25,1,0)) {CSE} & copied down 53k times

The actual return range is AH2:AH341 for the location number.

Now, I need to be able to list each of the 341 they are close to. The max count is 17, so I'll only need to list out 17 columns.

Maybe something like =LOOKUP(1,1/(69.1*SQRT(((Shops!$X$2:$X$341-C3)^2)+0.06*((Shops!$Y$2:$Y$341-D3)^2))<=25))),$AH$2:$AH$341)
but this only returns the first match. How do I return the 2nd, 3rd, 4th, etc?

Because of the sensitive nature of my data, we can use a much simpler array which I'll adapt; I'm mostly trying to understand the logic or formula that should be used.

Return Nth Match.xlsx

View 3 Replies View Related

Partial Match In An Array

Dec 13, 2008

column A
MARY
JOHN
MARK
SUE

cell B1
zzzJOHNxx

I am looking for a formula (Vlookup, Match, etc) that will look for an entry in column A that matches part of the string in cell B1 (not the other way around i.e. using wildcard)

View 9 Replies View Related

Array Of Variables Want To Match Them

Feb 21, 2008

What would be the best approach/funcvtion to use in excel if I had an array of variables and wanted to match them?

E.g.

1,2,3,4,5,6,7

I would like to lookup up a column and if either of these numbers are in that row to say "yes otherwise "No"

View 9 Replies View Related

Match With Wildcards In An Array

Jan 16, 2009

I matching up some ip numbers against some ip ranges and I'm finding I can only use the wildcards in the first argument and not the second array argument. Is that the case? Here's my files:

IP_List
141.188.146.000 =match(A1,IP_Range!A:A,0) Doesnt work
156.140.216.202

IP_Range
141.188.???.??? =match(A1,IP_List!A:A,0) works

I really need the first case to work (looking up an ip in the ip range). Is there a way to do this?

View 9 Replies View Related

Array Match Formula

Jan 21, 2009

I have the following array formula that identifies the first number in the column I:

=INDEX(I1:I1200,MATCH(TRUE,ISNUMBER(I1:I1200),0))

This formula works fine however I was hoping to expand the range to the entire column. I thought (obviously incorrectly) that the following formula would work:

=INDEX(I:I,MATCH(TRUE,ISNUMBER(I:I),0))

Instead of getting the same result as the first formula, I am getting "#N/A".

View 9 Replies View Related

Offset Index Match Array?

Jun 3, 2014

=INDEX('Data Dump'!$C:$C,MATCH('YTD Detailed'!B$2&A40,'Data Dump'!$G:$G&'Data Dump'!$D:$D,0))

I have to above array formula, i am looking to nest an offset within it. That looks up two columns to the right, but im having trouble.

Can an offset be added to an index?

View 8 Replies View Related

Set VBA Variable With Index/Match Array

Jan 5, 2010

I created an Index/Match array forumula in the worksheet. It works.

View 2 Replies View Related

Vlookup With Array Not Being Exact Match?

Jul 18, 2014

I'm trying to lookup XYZ plc in an array where the company names in col A are like XYZ plc (UK, London), ABC plc (Boston US) and I want the lookup to return a date in column 3. I've tried VLOOKUP(B2, LEN(LPR), 3, FALSE) where B2 is the cell holding XYZ plc and LPR is my array and it's not working.

View 2 Replies View Related

Array/CSE Formula Using INDEX(MATCH())

Jan 26, 2010

Imagine 5 periods of sales, growing by $550 per year, from $250 to $2,250. There is a columnar table with sales in increments of $500 to $2,000 paired with margin percentages.

Using INDEX(MarginColumn,MATCH(Sales,SalesColumn,1)) successfully retrieves the correct margin % for each period where Sales is that year's sales.

So, I tried to construct an array formula in the following way:

{=SalesRow*INDEX(MarginColumn,MATCH(Sales,SalesColumn,1))}

Sales is not changing, so that only the 1st year's margin percentage is being applied to each year's sales. I confirmed this by extending the array to a multi-cell layout.

How can I correct the formula so that the margin percentage is looked up as if it were using each year's sales independently? I know I can just SUM the array once this works, but this is my current road block.

P.S. If you see this answer immediately, how might I multiply the percentages by the sales that increase by $500 and sum the whole expression into one cell?

View 9 Replies View Related

Match Function With Dynamic Array

May 9, 2007

I am trying to replicate the following code using Cells references so that the row can be made a variable. I basically want to make the search array smaller with each loop.

LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range("B3:B250"), 0)

The above works, the following two variations don't:

LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range(Cells(ArrayStart, 2), Cells(250,2), 0)

LMatch = WorksheetFunction.Match(Cells(3, 3), Sheets("Product Matrix").Range("B3:B250").Item(ArrayStart, 2), 0)

View 7 Replies View Related

Index Match Array Multiple Criteria?

Jun 22, 2014

with a multiple criteria index match array!

I have attached an example where I need to bring back a result matching 4 specific criteria, but I cannot seem to get it to work at all!

I have attached an example dataset with the formula that I was trying to get right (and failing miserably!!)

View 6 Replies View Related

Find Number In Array That Is Less Than INDEX MATCH?

Jun 25, 2014

Cell P14 = 4.7

My array is H42:N72, in H42:H72 I have numbers 15,14,13....0,-1,-2,-3, etc...

In N42:N72 there is a corresponding $ amount that I would like to return based on finding the value which is greater than 4.7 (so, looking to match the $$ amount to the number 5 in column H42:H72)

I've tried using INDEX MATCH but can't figure this out.

View 10 Replies View Related

Index/Match Function Inside An Array

Jan 20, 2010

Solution for all: {=SUMPRODUCT(SUMIF(Sheet1!$A$2:$A$16,$F$34:$F$40,INDEX(Sheet1!$B$2:$K$16,0,MATCH(T$10,Sheet1!$B$1:$K $1,0))),U34:U40)}

Say I have an Excel workbook with two sheets: Employee Hours and Employee Wages. On the Hours sheet I have 31 columns (Jan1 - Jan31) with inputs for the number of hours worked by each employee by day. On the Wages sheet I have listed the same 31 columns with their wages each day (I do this to factor in wage increases that occur fairly often).

My goal is to use an INDEX/MATCH function to calculate the total daily compensation for each day on the Wages sheet by multiplying hours*wages for all employees that day. Here's the code I'm using:

View 2 Replies View Related

Concatenate Array Value From Cells For INDEX / MATCH?

Aug 2, 2012

Why this formula code:

Code:
=INDEX(INDIRECT($A$3&D7&$A$4),MATCH(B7, INDIRECT($A$3&D7&$A$5),0),5)

Where A3 D7 and A4 concatenate to form a workbookname!named range1 and equally A3 D7 and A5 form workbookname!named range2 works perfectly well for a fixed range as named range, but not if the named range is dynamic using the typical OFFSET, COUNTIF method?

I need to be able to concatenate the range reference in this way, but for the named range reference to be a dynamic range that will grow and change with additions etc.

View 1 Replies View Related

Excel 2010 :: Index Match Using Array?

Sep 13, 2012

The context of this problem is that I am pulling sales data from different outlets to analyse monthly sales. The data from the various outlets are in various formats and the products, even though they are the same throughout all the stores, are named differently. For example, Mushroom Soup can be named as "Soup Mushroom", "Mushroom Soup" or "Cream of Mushroom". This makes analysis really tough.

I first created a table with a list (K6:P6) that had the varying names of the products. This is shown as the first table with 3 rows.

Then I tried to match this list to a range of products sold by an outlet e.g. Electric. (shown in the next bigger table $D$10:$D$254, ) Next, I used Index to call up and display the sales of that product next to table with list A ($G$10:$G$254)

This works for some entries but not for all. I get mostly #NA answers even though I do ctrl-shift-enter. Also, the bigger table is in a separate file and I am using excel 2010.

=INDEX('[GON-JUN 2012.xls]gon-jun'!$G$10:$G$254,MATCH(K6:P6,'[GON-JUN 2012.xls]gon-jun'!$D$10:$D$254,0))

[URL]

View 8 Replies View Related

Alternative To Index And Match Array Formula?

Sep 18, 2012

complex formulas in Excel but managed to work out and create the following formula;

{=IFERROR(INDEX('owssvr(1)'!$AE:$AE,MATCH($A9&AK$1,'owssvr(1)'!$C:$C&'owssvr(1)'!$E:$E,0)),"")}

Basically I want to return a call quality score if the name and week match my criteria.

The above formula works perfectly, however, it is very slow and the sheet takes ages to update.

Is there a quicker and more dynamic way to achieve the same result?

View 9 Replies View Related

Transpose / Match / Array Column To Rows

Feb 27, 2014

I've tried using a Pivot Table, a Match Array V-Look Up formula I found on here (and can't seem to find anymore) that I altered to fit my cell needs, and even implemented RP-Excel.

This is an example of what I have:

Box
101
101
102
102
102

[Code]...

This is an example of what I'm trying to do:

Box
101
102
103
104

[Code]....

Additional challenges:

The actual workbook is over 4,000 rows long with a lot of various other information in neighboring columns.

The dates represent each time a specific box was filled. Some boxes only filled once, some up to 14 times. I only want up to the first five fills.

Able to try any of the following, or combinations of: Formulas, Pivot Tables, VBA, RP Excel

View 2 Replies View Related

Index Match Array For Multiple Cells

Mar 10, 2014

How to do INDEX MATCH ARRAYS. (to populate my report I need to match multiple rows and columns from source sheet to import data).

Now I am trying to replicate same in VBA. (for this example row1&2 & column1&2 on both seed(source) and result(one I am trying to populate) sheets).

I wrote the code below that works just fine for 1 CELL.

Sub Button1_Click()
Range("C4").FormulaArray = "=INDEX('SEED'!$A$1:$f$6,MATCH(A4&B4,'SEED'!$A$1:$A$6&'SEED'!$B$1:$B$6,0),3)"
End Sub

I know in excel I can simply drag the formula across rows/columns to populate them automatically and the way I would do this in VBA would be by creating loops.

Here is what I have that needs improvement

Sub Button1_Click()
Dim iRow As Integer
For iRow = 3 To 4
Range("C" & iRow).FormulaArray = "=INDEX('SEED'!$A$1:$f$6,MATCH(AiRow & iRow,'SEED'!$A$1:$A$6&'SEED'!$B$1:$B$6,0),3)"
Next iRow
End Sub

Here iRow is to identify row number, and to keep simple I am only doing 2 rows. but how do i write MATCH statement to identify rows needed to be matched from SEED sheet?

View 6 Replies View Related

Index Match Or Array Search Function

Jul 30, 2014

Here is the table I am working with

Date
Open
High
Low
Close
Volume
Adj Close
Semi-Annual Yield
Theoretical Bond Price
Index
Coupon
Total Value
Peaks
Troughs

[Code] ..........

The Relevant columns would be "Date" column A cell 1, "Total Value" column L cell 1, "Peaks" column M cell 1, and "Troughs" column N cell 1. What I basically want to do, in the next column, column O, is this: If cell N# = "Trough" find the previous M cell = "Peak" and take the L cell in that "Peak" row and subtract the L cell in the Trough row from it (like =(L4-L9)/L4)). Then in column P, if the percentage drop was 5% or greater, I want to find the days between the trough we are looking at, in cell n10, and the NEXT Peak, cell M11, using the corresponding dates in Column A.

View 3 Replies View Related

Array To Match Several Results Within SUMPRODUCT Function

Aug 25, 2008

I'm using a formula (with the SUMPRODUCT function) within which I need to match the month & year from an array with 3 "true" possibilities...

Meaning that if data (month & year) from the array matches any of the 3 months & year of a specific quarter (for example July 08, August 08, September 08), the result of that section should be "True".

The data to be matched (any of the 3 months of each quarter) is drawn from a table header (showing every month of the year) by using this "monthly" formula:

TEXT(H7;"mm.yyyy") where H7 holds "01.07.2008" (but displays "Jul. 08") and returns "07.2008".

I'm trying to extend it to something like:

TEXT({H$7;I$7;J$7};"mm.yyyy") to match either July 2008 (H7), August 2008 (I7) or September 2008 (J7) for the 3rd quarter of 2008 but when I hit Enter, I get an error and H$7 is highlighted ("ctrl + shift + enter" doesn't help).

Here's an excerpt of the formula that works well for other queries on my worksheet:

=SUMPRODUCT(--(TEXT('Current update analysis'!$O$2:OFFSET('Current update analysis'!$O$2;(COUNTA('Current update analysis'!$B:$B)+20);"mm.yyyy")=TEXT({H$7;I$7;J$7};"mm.yyyy")); --('Current update analysis'!$k$2:OFFSET('Current update analysis'!$k$2;(COUNTA('Current update analysis'!$B:$B)+20)="ok"))

how I could/should structure the formula for it to work?

View 10 Replies View Related

Combining ISNA(match) With Lookup Array

Feb 15, 2010

Am trying to figure out the best way to combine into 1 cell an ISNA(Match... and a Lookup array that will run if the ISNA(match ... returns a false value.

Right now it's running in 2 separate cells ISNA(Match ... and then an if statement that if the ISNA(Match returns false, that the look-up runs, if it doesn't return false, then the value is 0)

View 9 Replies View Related

Multiple Array Arguments In Match Formula

Jun 11, 2006

I'm tryig to find a way to index data in an array that meets certain matching criteria. I am looking for an employee's rate on a given day by searching a database that lists the dates that an employee's rate was changed. I was hoping to solve it with a crafty index and match array formula but have been unable to find something that works so far. I have attached a simplified example of what I am trying to do.

View 3 Replies View Related

Array To Check User Input Match

Feb 22, 2007

This is what i want to do: SEE ATTACHEMENT

•Write codes to pop up an InputBox to ask the user for a customer name.

•The program uses the user’s input to check whether the name is on the list. If it is, display an msgbox saying that the customer name is on the list, and the corresponding cell will be indicated in boldface and in blue. Otherwise, an msgbox will be displayed saying that the customer name is not on the list.

Dim the customer list as an array (string var. type) and Dim Found as Boolean. You will need the If-Then construction and For-Next or Do-While/Until loop too). Create a button to run and another to restore the formatting to its original style.

This is what i did so far and still having problems with it:

Option Explicit

Sub customers()

Dim Arr()
Dim R As Integer
Dim C As Integer
Dim ReturnColumn As Boolean

View 6 Replies View Related

More Than Two Criterias In Autofilter

Nov 3, 2008

i am trying to filter data based on more than one criteria (8 to be precise). I have some data in one worksheet and i need to transfer it to other worksheets depending on certain criteria. for example if cell A1 has A or B then it should go to "temp1" spreadhseet, if A1 has C,D, E, F, G or H then it should go to "temp2" worksheet etc.

Is there a smart way of doing this rather than writing a number of with statements using 2 criterias each and hence copying data in more than one attempt (and thus slowing down the macro)?

I did think of using creating a dummy column, then using If statements to write True or false in that column, using true & false to filter and copy the data and then finally deleting the column. but as i understand i can not have more than 7 nested if statements but i have 8 criterias.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved