How To Assign Two Actions To One Button
Jul 3, 2014
I need to assign two actions to a one button.
1. action: Copy Column A, paste to Column C
2. Write time&date into G5
I am only capable of doing one button for each action using the macro recorder and simple code:
[Code] .....
View 2 Replies
ADVERTISEMENT
May 10, 2014
How can I execute two macros with one button press?
the sub names are CDO_Text and CDO_Mail
View 2 Replies
View Related
Aug 26, 2007
I have had the following written for me
Private Sub Worksheet_Change(ByVal Target As Range)
For Each Cell In Target
If Cell.Column = 4 and Cell.row >= 17 and Cell.row <= 20 Then
If Cell <>"" Then
Cell.Offset(0, 3) = Date
Else
Cell.Offset(0, 3) = ""
End If
End If
Next Cell
End Sub
I wish to assign that code to a button on sheet 1.
I normally just right click the buitton and assign the macro, but on this occasion I can't. I think it's to do with it being a private sub.
View 14 Replies
View Related
Apr 3, 2008
While practicing writing macros and studying the VBA code, I decided to add a button to run the macro, something I've done many times in the past. But the option to associate the new button with any macro doesn't seem to be available.
A. How can I assign a new button to a macro
and
B. How can I make the association in VBA?
View 9 Replies
View Related
Nov 22, 2005
I have to modify 2000 files so I've written a master file that loops through a list, importing modules and forms into the 2000 files it opens and closes. On each file when open it draws a button on worksheet. I then want to assign a macro to the button called "ModifyMenu" . The code for 'Modifymenu' is imported into file_01.xls and is a unique name. It does not exist is master.xls, so no confusion.
The code for assigning the code is as follows :
Windows("file_01.xls").Activate
ActiveSheet.Shapes("Button").Select
or
Workbooks("file_01.xls").Sheets("1 B").Shapes("Button").Select
Then
Selection.OnAction = "ModifyMenu"
(This links to master.xls!ModifyMenu not file_01.xls)
Selection.OnAction = "file_01.xls!ModifyMenu"
(This fails, runtime 1004. 'Unable to set the OnAction property of the button class)
Selection.OnAction = ThisWorkbook.Name & "!ModifyMenu"
(This links to master. MAster is the active code even though 'file_01.xls' is the active worksheet)
Variations on the above seem to result in the same 1004 error or linking back to master regardless of the fact I'm trying to link to file_01.xls.
View 6 Replies
View Related
Oct 22, 2009
I have a start page in the beginning of my excel workbook.
This is where i want to assign a macro to a search button.
I want the macro to search the entire workbook but only in a certain block on each worksheet.
View 9 Replies
View Related
Jun 8, 2006
I am creating controls on a Userform on the fly. A shortened example of my code to create a button is below:
Set BtnEdit = .Controls.Add("Forms.CommandButton.1", "BtnEdit", True)
With BtnEdit
.Left = 220
.Top = 85
.Width = 50
.Font.Underline = True
.Caption = "Edit"
.Enabled = True
End With
What I want to do is assign a pre-existing sub-routine to the button, at the same time as I create it. I have tried using
.OnAction = Mysubroutine
View 4 Replies
View Related
Jun 9, 2013
I want to assign a macro of start time and end time on one button. I tried but its not working..
View 2 Replies
View Related
Dec 30, 2008
Created a button in a spreadsheet but cannot activate the shortcut menu that contains "assign macro." Help says select the button, right click on a handle and a shortcut menu appears with "assign macro." Not. I right clicked every handle numerous times and get the regular shortcut menu without the "assign macro" option.
View 9 Replies
View Related
Apr 2, 2008
how I can write code to create a button on a worksheets and then link to another subprocedure.
I tried recording a macro and this is what excel so eloquently gave me:
ActiveSheet.Buttons.Add(384.75, 60.75, 79.5, 39.75).Select
Selection.OnAction = "CreateImport"
ActiveSheet.Shapes("Button 1").Select
Selection.Characters.Text = "Parse Deposits for Import"
With Selection.Characters(Start:=1, Length:=25).Font
. Name = "Arial"
.FontStyle = "Regular"
.Size = 10
.Strikethrough = False
.Superscript = False
.Subscript = False
.OutlineFont = False
.Shadow = False
.Underline = xlUnderlineStyleNone
.ColorIndex = xlAutomatic
.TintAndShade = 0
.ThemeFont = xlThemeFontNone
End With
This works fine, my only problem is if the button that is created is actually named Button2 or 3, etc. Is there a way to assign the new button to a variable, or would it be an object? this way it wouldn't matter what it was named.
View 3 Replies
View Related
Dec 23, 2013
Userform2 is popped up from another userform3.
How can I have userform 3 when clicked fill in a textbox on userform2 and then finally assign it to cell F3 on my worksheet.
VB:
Private Sub CommandButton2_Click()End Sub
So I need commandbutton2 (which needs to retain a value of 1` when clicked ) on Userform3 to assign the value of 1 to TextBox44 (Which is using control Source F3 so the value here ends up in F3
VB:
Private Sub TextBox44_Change()
If TextBox44 > 5 Then
MsgBox "Your entry must be part between 1 and 5", vbCritical
Exit Sub
End If
End Sub
View 2 Replies
View Related
Feb 13, 2014
Sheet 2 contains a drop down list containing names, would like to assign a Macro to a button on same sheet that would refer to sheet 3 based on certain criteria.
Sheet 3 contains columns A - K of data. 2 criteria, data in column D and column K. Column D would be the same as names in the drop down list, whereas column K refers to a constant, either y or n.
Example: If D contains "Cheddar" and K contains "Y", copy and paste A:K to Sheet1, preferably starting at row 7.
View 3 Replies
View Related
Feb 23, 2010
I'm trying to assign a shortcut to a macro I wrote in VB. However, when I go to Tools->Macros->Macros, none of my macros (whether coded in VB or recorded) have the "Options..." button enabled, so I can't assign the macro. This happens whether I use Excel 2003 or Excel 2007. The file is not readonly and I have tried the various levels of macro security. I have VBA installed.
View 5 Replies
View Related
Aug 6, 2007
Is there a VBA code that will enable me to create a button and assign a certain macro to it everytime I insert a new worksheet?
how to insert a new worksheet with VBA, what I want is that when I insert that worksheet, there is already a button there with a specific macro(already made) assigned to it.
View 3 Replies
View Related
Dec 23, 2009
I'm verrry new to editing VBA code and I've been trying to figure out how to send a column of data ("Min Data" AB3:AB21 from "Sheet1") to a worksheet ("F4" - Min) and sending another column of data ("Max Data" AC3:AC21 from "Sheet1") to a different worksheet ("F4" - Max) by using only the one button ("Record Data" from "Sheet1"
I've been trying to figure out ways to edit the VBA in "Module 1" to make this work
Can anyone help me out here? If what i'm asking for isn't clear enough, just let me know and i'll try to explain in more detail.
View 6 Replies
View Related
Mar 6, 2014
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
View 3 Replies
View Related
Jan 18, 2014
I need to repeat the following two actions one after another therefore I cannot use F4 key
The actions are :
1) select some cells in two rows and colour them yellow.
2) select the last two cells of the rows ans merge them.
these are one after another where F4 will repeat only the 2nd step but I need the 1st step of colouring.
Are there any short cut keys or method or recording to repeat the above steps when necessary.
View 1 Replies
View Related
Jul 17, 2009
I have a list of petroleum accumulations with three types of data: Reservoir depth, Net Pay and Gas-oil ratio. for each accumulation, the number of reservoirs within each can vary. So I may have a accumulation with only one set of those stats, or an accumulation with 20.
I need the program to go down an alphabetized list (8000 entries long) and after every unique accumulation name average the values of the stats(which are in three separate columns) then put it in one row perhaps beginning in Column M or another sheet. So that I have a list of accumulations with the average of those stats, one entry per accumulation name.
View 5 Replies
View Related
Jul 15, 2014
I am working on trying to make a macro I wrote run faster, and I understand that one way to do this is to stop certain actions from occurring. However, I am having a hard time understanding what stops what, specifically among these:
[Code] ......
View 2 Replies
View Related
Sep 10, 2012
This Coding is correct for CheckBox49. This code Changes the Color of one Cell from Black to white and the cell below it from white to black...(its a dipswitch) when the check box is checked... When its unchecked it does the opposite....
Code:
' ACM 1 Switch 1
Private Sub CheckBox49_Click()
If CheckBox49.Value = True Then
Range("AC24").Select
With Selection.Interior
.Pattern = xlSolid
[Code] ........
Now what needs to happen is this.... I'd Like to have this Happen if checkx49 is checked...
Code:
Range("A1,K50,K51,R50,R51").Select
Range("R51").Activate
With Selection.Interior
.Pattern = xlSolid
[Code] .......
If Checkbox49 is unchecked do this... Put in D26 Reader Name? in Italics.
Code:
Range("K50,K51,R50,R51").Select
Range("R51").Activate
With Selection.Interior
.Pattern = xlNone
[Code] .........
Also...what ever information is entered in D23.
Put that in F50 with RDR at the end...
Whats in D23 Put in F51
Whats in D23 Put in M50 and concatenate with a space from cell U49
Whats in D23 Put in M51 and concatenate with a space from cell Y49
Lastly code to select K50, K51, R50, and R51...=Len whats in F50, F51, M50, and M51 when the box is checked...and dont len when the box is unchecked.
View 6 Replies
View Related
Feb 7, 2014
I am currently using a product formula in a cell and was wondering if I could add a round up/down action to numbers containing decimals? For example, let's say that my cell values are 300, 327.6 and 355.2 after using the product formula. Is it possible for those values to reflect 300, 328 and 355, respectively?
View 5 Replies
View Related
Oct 4, 2009
I need to insert code into an existing macro that does each of these two similar actions:
If a specified word is in the heading (row 1 cell) of a sheet, DELETE that column
If a specified word is in the heading (row 1 cell) of a sheet, BOLD that column.
View 9 Replies
View Related
Sep 20, 2007
Is there a structure inside of Excel which keeps track of all the actions taken by a user (something that would presumably be used to allow for an undo sequence)? If so, is there a way to get access to it?
View 2 Replies
View Related
Jan 15, 2014
I want know the formula for below issue. I have number of of actions done for each day for a month or more.
If I select a particular period for example 01jan14 to 10jan14 i want to get all actions done in this period.
View 2 Replies
View Related
Dec 30, 2009
I have a series of macros altering various workbooks and sheets. They're numbered Step1, Step2, etc. In my Step5 I have a series of Case statements in a macro, and I don't know how to get it to do what I want next. I have NOT tried running this code yet, and I'm sure I have something(s) wrong in it.
1) If the selection in DstWbk, sheet "Steps", is "01DSP" through "11DSP" the macro needs to delete specific columns in the SrcWbk, and then move to the next step (6).
2) If the selection in DstWbk, sheet "Steps", is "*DSP" the macro needs to go directly to the next step (6)
3) If the selection in DstWbk, sheet "Steps", is anything else the macro needs to flash a generic "No Data found" message and move on to Step7.
The part of the code that's throwing me begins at 'Select only the specific regional data' and ends at the "Case Else MsgBox"
View 3 Replies
View Related
Sep 26, 2013
I'm using a Private Sub Worksheet_Change(ByVal target As Range) macro on Worksheets(2) to perform certain actions when a selection from Worksheets(1) is pasted to Worksheets(2). Before ending the Worksheet_Change sub I'd like it to deselect the copied selection on Worksheets(1). I've tried to do this by selecting Worksheets(1) and moving the cursor, but VB ignores the "With Application.Worksheets(1)" instruction. Removing "Private" from the sub heading makes no difference.
Is it possible do this with a Worksheet_Change routine? If so, how?
View 7 Replies
View Related
Apr 28, 2009
I am trying to use following codes for a add-in utility so that user can enable or disable logging activity for a given workbook.
My problem is to how to add the following code to a new workbook so that "Loginfo" function could be activated. I have tried some application... based commands but it do not seem to be working.
View 6 Replies
View Related
May 2, 2009
I have made an class and created a file to log when user change value or insert formula in a sheet get recorded in a file C:Logme.csv. The problem is it is recording the value and formula at random i.e in some instances it records the value and in some instances it is not recording the value and formula in logme.csv . I am unable to figure out why this is happening?
View 3 Replies
View Related
Jun 15, 2009
Macro: the system monitors changes to the spreadsheet and then performs actions accordingly. Example: If the value of column c = Bug, then it sets the value of G to Celeste and Column H to Kewill.
Could this macro be changed so that instead of having to enter "Celeste" in this code, it could set the value of column G to the value found in H5 on the sheet?
I tried replacing "Celeste" in the code with H5 but it did not work.
Private Sub Worksheet_Change(ByVal Target As Range)
'Declare variable
Dim iCol As Integer
'Look at the column number of the changed cell (Target)
Select Case Target.Column
'Column C
Case 3
Select Case Target.Value
'if "Bug" set iCol to 3 (Red)and change value of column G to "Celeste" and Column H to "Kewill"
Case "Bug": iCol = 3
Target.Offset(, 4).Value = H5
Target.Offset(, 5).Value = "KWL"................
View 9 Replies
View Related
Jun 16, 2006
I wish to perform different actions depending on whether certain errors are present in a cell and I can't figure out how to do it.
Attempt (within some For loop):
othCell = ActiveCell.Offset(-95 - counter, 0)
If othCell = CVErr(xlErrNum) Then conditioncount = 0
This generates a "type mismatch" error. I also tried othCell.value in place of othCell on the second line; I don't really follow the distinction in usage for "value". I've also attempted this with Error 2036 in place of CVErr(xlErrNum). I don't know much at all about VBA!
View 2 Replies
View Related