How To Assign The Whole Row To Another Sheet's Row
how to assign the value of whole row from one sheet to another sheet?
Worksheets("Result").Cells(count, 1).Value = Worksheets("Current").Cells(k, 1).Value
the above code assign only the specifc cell value. but i need to assign whole row
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Highlighting Active Cell's Row, Along With Any Row That Shares Same Value In That Column
Is it possible to click on a cell in column C, and have the wishlist below happen: That active cell's row is hightlighted. Any cell in that column that has the same value as active cell is also highlighted. Plus, any cell in another sheet that has that value it's row is highlighted too. Example: I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
View Replies!
View Related
Lookup Numbers In Sheet And Assign It's Cell Reference
I have a worksheet(Shed) and the range where numbers will be entered are B3:E46. In another sheet(Location) I have a in column A "Shift #", B "Shift Bus #" C "Location". what I am attempting to do is when a bus number is entered into Shed! ie.. b3=900, d15=350 etc.... Location! would lookup ie.900 in the Shed! and match it to Location! (column B) and from there provide the cell ref in column C. So I could then print Location! that would give me in Shift # order where each Bus # the shift is assigned to.
View Replies!
View Related
Would Like To Assign Ranges For Each Row
I am defining ranges for cells in a row by the formula: Set myrange3 = Range("B13", Cells(13, Columns.Count).End(xlToLeft)) Set myrange4 = Range("B14", Cells(14, Columns.Count).End(xlToLeft)) Set myrange5 = Range("B15", Cells(15, Columns.Count).End(xlToLeft)) Set myrange6 = Range("B16", Cells(16, Columns.Count).End(xlToLeft)) Set myrange7 = Range("B17", Cells(17, Columns.Count).End(xlToLeft)) . . . . . Set myrange62 = Range("B72", Cells(72, Columns.Count).End(xlToLeft)) The last one is 62 assuming data wont go over 62nd line. However, there would be always a room for error if this is done manually. Is there any way, I could assign range variables only till that row which has data For example The data below shows I only need to define range variables namely myrange1 including cells 2 and 5 till myrange7 of cell values 9 and 6. A B 2 5 3.4 8 5 12 6 23 77 56 8 7 9 6 The syntax: LastRow = Selection.SpecialCells(xlCellTypeLastCell).Row helps by giving the number of the last valid data row, but I am not sure how this might be used if at all in automatically assigning ranges of valid row cells to variables.
View Replies!
View Related
Assign Number To Row ....
I have a list of numbers such as: A01 A23 A53 A64 A74 A128 B01... the goes on too approximatly D128 and i wanted to know if there is a way to assign the value to the row? For example: A23 in column A row 23 A53 in column A row 53 is there any method that achieves this?
View Replies!
View Related
Average Row Of Numbers Using Different Row #'s
Field 1 input: Beginning Date (e.g 7/17/09) Field 2 input: End Date (e.g. 7/23/09) Need: Average costs on and between these given dates From table with this information: Date Market two 7/16/2009 80 7/17/2009 80 7/20/2009 82 7/21/2009 84 7/22/2009 82 7/23/2009 82 7/24/2009 82 7/27/2009 82 I need Excel to average Market two 7/17 to 7/23 (80, 82, 84, 82, 82) based on the dates I give it. If I change the date to 7/20 to 7/24, I then need excel to average (82, 84, 82, 82, 82) How can I get Excel to average based on different dates? Or basically, how do I get it to pull rows between 2 inputs?
View Replies!
View Related
Assign Loop Counter To Range Row
How do you assign a loop counter value to a range row value? Scenario: Add cells from a column that aren’t successive. SUM C10 + C17 + C24 etc Private Sub CommandButton1_Click() Dim total As Integer Dim counter As Integer For counter = 10 To 700 Step 7 total = total + Range("Ccounter") Next counter End Sub
View Replies!
View Related
Insert Row On Sheet & Move Active Cell Row To It
I would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time. Example: Sheet 1 – is current jobs and sheet 2 is old jobs. My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2. I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
View Replies!
View Related
Macro For Copy/paste Selection Of A Row To A New Row On New Sheet
I'm new to excel and VBA and I'm having problems with a copy paste macro that I’m using to transfer information from Sheet1 to sheet 3. The macro must: On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M. After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.
View Replies!
View Related
Each Row In The List Has A Task And Assign Email Address
[code]... The above is basically an action list showing who needs to do what. Each row in the list has a task and an assignee and the assignee's email address I want a macro (that will be attached to a button or text in column H) that will copy that entire row (as well as the headers in ROW 4) and email that info via the default email application being used on the users PC (most likely to be MS outlook). i.e if i click on the button or text in column H for Task A (Row 5), an email will be sent to JB@excel.com (column G), for Task E (Row 9), an email will be sent to TB@excel.com,...etc. I would prefer it if the info was sent as the actual message in the email instead of an excel attachment.
View Replies!
View Related
Copy A Row And Then Paste It On First Empty Row In Another Sheet
Have a small VBA code that simply copy a row and then paste it on first empty row in another sheet. Its working if i use a regular macro, but i have some problems to get it to work with some code. I want it as VBA since the copying is alot smoother. The problem i have in the code is the PasteSpecial.value, Since i dont want the formula to get pasted. Attachiing the worksheet. Its the macro PasteSpecial that i need alittle guiding on if possible.
View Replies!
View Related
Can't Assign Shortcut To Macro: 'Options...' Button Disabled
I'm trying to assign a shortcut to a macro I wrote in VB. However, when I go to Tools->Macros->Macros, none of my macros (whether coded in VB or recorded) have the "Options..." button enabled, so I can't assign the macro. This happens whether I use Excel 2003 or Excel 2007. The file is not readonly and I have tried the various levels of macro security. I have VBA installed.
View Replies!
View Related
Copy Row To Sheet With Same Name As Value Of Cell In Row
I have a workbook that has about 300 different sheets- each the name of a different chapter of a fraternity. I get new lists of members daily and have to manually sort them into the 300 different sheets. Is there any way I can automate this? For example, if column "E" contained the chapter name- in this case cell E38 contained "Oklahoma Kappa" , the macro would automatically copy row 38 to the first empty row in sheet "Oklahoma Kappa".
View Replies!
View Related
Sorting Certain Columns But Ensuring Certain Rows Remain Fixed To Their 'master Row'
I have created a spreadsheet which is tallying up various data. I have a number of different categories e.g. A, B, C, D and within each one of these are sub categories. I then have a tally for the number of each category and within that the number of each sub category. I then want to sort the data so that first the main category is sorted in order of highest tally to lowest. the sub categories however need to stay with their primary category. I then need to sort each sub category within the main category. the data looks omething like this: category tally sub cat number A 6 A 3 B 4 C 6 B 9 A 1 B 6
View Replies!
View Related
Copy Last Row To Next Available Row On Other Sheet
i am trying to make a spreedsheet to help me organize some stuff here at work. we have a bunch of overlays stored in several different locations. on top of that, they are all customer specific. there is also 8-10 cells worth of info describing each one. in my book, i have several sheets, one for each customer along with one contaning everything. i wrote a macro trying to copy a line from one sheet and pasting it into the all sheet. the problem is, its copying from the same line every time and pasting into the same line every time. i want it to take the last line added into a customer specific sheet, and then add it on to a new line in the ALL sheet. then at the end, i want it to re-sort all rows in order.
View Replies!
View Related
Copy Row To Next Available Row On Another Sheet
I have the following code. I select a row in sheet one, run the code (which will eventually be attached to a button, but right now, is not], and it moves that row to another sheet. The problem is, it overwrites the code on the other sheet. I want it to either be added to the second sheet on the first available row.
View Replies!
View Related
Copy The Information From The Row Directly Above The New Row And Paste (values, Formulas, Formats, Etc) Into The New Row
1. In whatever cell is selected when the macro is run, enter a new row. 2. Copy the information from the row directly above the new row and paste (values, formulas, formats, etc) into the new row. 3. Return to column P in the new row, i.e if the new row is row 11, then return to P11, for row 12 return to P12, etc. I have tried recording the macro but because it is hard coded to specific rows, its not working. I have attached a sample copy of the sheet (had to zip due to the size of the file).
View Replies!
View Related
Getting Value From Next-highest 'header' Row
I have a worksheet that contains a number of rows. [Thank you, Captain Obvious!] These rows are logically grouped to represent a series of "items", with each item having one or more rows (with a "header" row at the top). The rows for a particular item represent different types of information about that item, and therefore make use of different formulas based on the row type. Due to the relative complexity of the formulas in these rows, I am creating a series of row "templates" from which I can copy and paste every time I want to create a new item or add rows to an item. As such, I am trying to avoid direct cell references to different rows, as these would easily get messed up during cut and paste. Instead, I am trying to limit myself to various lookup functions (e.g. OFFSET, MATCH, etc...) that will work regardless of where a row is added. In order to accomplish this I am using a "key" column to group all rows for a particular item together. Until now I have had to type in the key value for every row for a particular item. What I would like to do is to only have to type the key value in the header row, and have a formula populate the key value in all subsequent rows ... until a new header row is reached, at which point the new key value will be used. Take a look at the following example: ....
View Replies!
View Related
Find '0' And Hide Associated Row
I need to write a macro which find the value 'O' in column D, then hides the row which contains that value. I have very little VB knowledge I'm afraid. I have got this far. Sub Find_0_and_hide() ' Find_0_and_hide Macro ' Macro recorded 20/03/2007 by Zoë Braven-Giles ' Select all rows and unhide them Cells.Select Selection.EntireRow.Hidden = False ' Find value '0' in column D and hide associated row End Sub Do I need to do an array? Or an IF statement? Though I am not sure how to do either I'm afraid.
View Replies!
View Related
Identify Button (shape) Row To Insert Row And Delete Row
I have a button (group containing and add and delete button). I want to identify the row (position of shape/button calling the macro) to enable inserting a new row (1 row down from current row). Then do the same to delete a row (position of shape/button calling the macro) to enable deletion of selected row. This will allow me to add/insert rows by the button located at that row The problem i have is getting the row property (row position of the button eg. TopLeftCell.Row) of the add button. The add button (RowBtnAdd) is a shape within a group (BtnGrp) I also note that when a group is copied, it has the same shape name as that copied. I want to keep the add and delete shape within the group (BtnGrp). I do not want to select a cell or row or enter a row number to delete etc. refer to sample workbook attached. Currently only has one record row.
View Replies!
View Related
Copy Entire Row By Range & Suppress 'Cannot Edit Links' Message
I have 10 workbooks which have various calculations and have several links to each other. We use Excel 2003. For each of these files, I have the following code in the Auto_Open module Range Range(“TodayComp”) is a date taken form a link in another spreadsheet. It is on Column 3, but the row changes every day as more rows are inserted before it This sub looks at Range(“TodayComp”) and checks the date on the cell directly above. If say Range(“TodayComp”) is 6/25/2008, and the cell above is 6/22/2008, it will insert three rows right above Range(“TodayComp”). These rows need to be copied with formulas from the current row above Range(“TodayComp”) Issue One: The following code works (it copies the rows), but it takes forever to run, as you can see in bold, I copy and paste each cell, instead of the entire row. Is there a way to copy and paste the entire row? Remember that I have only a named range to refer to, no cell address as it changes every time. Public Sub Auto_open() Update_Dates() End Sub Public Sub Update_Dates() Dim tdy, prev As Date Dim index, i, j, yr, no_inserts As Integer Sheets("Comparison Computation").Activate
View Replies!
View Related
Copy 'x' Cell Value Evey Nth Cell Along On Same Row
Have often used this site, but now need an answer to something a little more specific. I would like to create a forumlae/function that would allow me to copy a cell value 'x' into every 'y' cell along. e.g copy cell x every 3rd cell along (in same row). The formulae must allow for 'y' to be of any value between 1-5 as this can change. I have attached a screenshot, as pictures are probably much better than my text above.
View Replies!
View Related
Auto Duplicate Row Contents From One Sheet To 2nd Sheet If Column Contains Set Words
I want to end up with is when I type text in any row of the 'Master' sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (referred to by text entered in column O). For example row 5's contents from the Master sheet would duplicate into the sheet named 'Accommodation' as O5 contains the word Accommodation. In addition, should the details ever change in the Master, this would also need to be reflected in the individual sheets. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie if row 5 had the first occurrence of the word Accommodation in column O, the contents of that row would be placed into the next available first blank row of the Accommodation sheet, which in this case would be row 2 as the headings are on row 1.
View Replies!
View Related
Auto Duplicate Row Contents From 1 Sheet To 2nd Sheet If Column Contains Set Words
I want to end up with is when I type text in any row of the Master sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (as per column O). For example row 5's contents from the Master sheet would duplicate into the sheet named Accommodation. In addition, should the details ever change in the Master, this would need to be reflected in the individual sheets also. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie row 5's contents to be placed into row 2 of the Accommodation sheet seeing as it's the first occurrence, and row 6's would go into row 3 etc.
View Replies!
View Related
Create New Sheet For Each Row Of Another Sheet Auto Populate Data.
i have a sheet called 'sample database'. it consists of 56 columns, each with a specific title in row 1. i.e. name, surname, mobile_number, and so on. from row 2 onwards the data has been populated for roughly 200 rows. i have another 'Capture Sheet' which has the same titles as 'Sample database' except it's in a different format. its a printable form that is given to new employees when they start. once they have completed it it gets captured into the 'Sample Database' sheet. my wifes boss now wants 1 new sheet for each row in the 'sample database' sheet based on the format/layout of the 'capture form'. how can i get the 'capture form' to auto populate the data from the 'sample database' sheet and create a new sheet for each row? i know this is possible i just dont know how to do it.
View Replies!
View Related
Copy Row From Sheet 1 To Sheet 2 When Data Entered In Cell F
I have Worksheet 1, with columns A to E. I would like a row to be copied to Worksheet 2, as soon as cell F in Worksheet 1 is populated. Also the row to be deleted from Worksheet 1. So, as soon as F1 in worksheet 1 is populated and enter button pressed, row A1:F1 will be copied to the next empty row in worksheet 2, while being deleted from worksheet 1. So eventually all rows in worksheet 1 will be deleted and rows in worksheet 2 will be populated.
View Replies!
View Related
Delete Row If Doesn't Contain Certain Numbers
Working at a company where we every month extract our customers into a excel document. This is the CRM system , and some of the clients can't (shouldn't) be approached. In Cell C is their customer classifications. In total there is about 60 different classifications. 10 of them is clients who we can send information to. For example customers with class 11111 or 41414 or 51515 or 61616 (among with 45 others) can't be approached. I'd like a macro/script who can delete all the nonrelevant clients so that afterwards I have a list of clients who can be approached.
View Replies!
View Related
Colour Row To Denote It's Use In Autofilter
I am using autofilter and then copying some cells from the rows that are selected as a result and pasting them to another worksheet within the workbook. My problem is that in the worksheet that contains the autofilter I need to colour (or index?) the row that I am copying to show that it has been used. I tried UsedRange but got in a muddle.
View Replies!
View Related
Formula: Link Every Other 13th Row In Sheet 1 To Sheet 2
I have worksheet1 with 200+ customers and 12 months of data for each customer. I want to link each month to a separate worksheet (worksheet2, 3....12) for all customers. (i.e., customer 1's January activity across row 1, customers 2's January activity across row 2.....) Is there a way for me to create a formula or copy comand to link row1, worksheet1's data to row1 worksheet2 and then every 13th row in worksheet1 to row2, row3...in worksheet2? Right now I'm just putting the = in worksheet2 and mousing over to worksheet1.
View Replies!
View Related
CopyDown To The Last Row Of Data As This Will Vary From Sheet To Sheet
I've have a piece of coding. Sub CopyDown() Range("A2").Select ActiveCell.FormulaR1C1 = "=IF(RC[1]=1,R[-1]C+1,R[-1]C)" Range("A1").Select ActiveCell.FormulaR1C1 = "20090000" Range("A2:A200").Select Selection.FillDown Range("B2").Select End Sub This works fine, but I would like it to look in Column "M" but still insert in Column "A", Also instead of Range("A2:A200") I would like it to copy down to the last row of data as this will vary from sheet to sheet.
View Replies!
View Related
Drop Down List Isn't Transferring In New Row
I have a spreadsheet that has 5 columns. The first row is the Header row, the second row is for the data input, here are the columns: Column 1: Company Name, I have a drop down list associated with this column. Column 2: Sales Person, I have a VLookup function to check for the company name in Column 1 and fill in with correct Sales Person. Column 3: Total Sale, Manual input. Column 4: Commission %, I have a VLookup function to check Company Name and fill in the correct Commission. Column 5: Commission, Basic function of Total Sale * Commission %. I have a macro created that when run it will take all the information from row 2 and move it to row 3 and at the same time inserting a blank row 2 with the functions for me to fill out new information. The problem that I am having are 2 things: 1: When running the macro the functions will get applied to the newly inserted row but the drop down list for the Company column doesn't. 2: I would like to be able to start typing in the company name i.e "F" and have it jump to the F's in the drop down list.
View Replies!
View Related
Return Active Cell's Location/row
I'm having trouble identifing a way to return a location for the position of the active cell. I've searched Excel help with "Position, location, return, activecell, etc." and I can't seem to figure this out. I know that it's possible, so that's why I'm on here! ... Ok, say the active cell is currently "F1", and I need the location "F1" to identify the ROW to be used in a formula later, how would I go about that? The current contents of cell "F1"' will be "REPLACE", but I need to change the words "REPLACE" in "F1" and other cells labeled "REPLACE" in column F to the following formula (where the "1" in "A1" is is the current row):
View Replies!
View Related
Nested If's Or How To Check Multiple Conditions In A Row
I have the data in this form YYY NYY NYY NNY NYY NNY NYY NYY NYY NYY YNN NNY NNN NYY The output should check two conditions. If all three columns are "Y" then it should return value "Y". If any two columns are "Y" then it should return value "Y". or else it should return "N". Then the output should look like this.... The output column is colored in Red..........
View Replies!
View Related
Can't Get Row References To Update From Userform Formula
I have a userform that populates a list of names. As a name is added in column "D" column "C" updates a reference number using the formula =IF(D2="","",C1+1). I can get the formula to copy to the spread sheet but as a new name is added the formula stays the same. If I enter a name in cell D2 everything is fine but when I make the next entry in row 3 the same formula is entered as if it were text and not as a formula. so I wind up with a column of formulas that all say =IF(D2="","",C1+1) reguardless of what row the formula is in.
View Replies!
View Related
How To Lookup Row # Based On Content Of Another Column's Cell
I have a 3 column table with 20 rows. The first two columns contain travel expense data. The cells in the third column are blank exept for whichever cell I enter an "x" in. Please let me what formula or worksheet function do I use to calculate the travel expenses based on the data in the first two columns that correspond to the row of the cell with an "x" in the third column?
View Replies!
View Related
Formulae To Find Last Used Row In WorkSheet: Aladin's UDF
I found this post in the archive section. Its purpose is to find the Last Used Row in a Range, "A:A". Using it, I get a #Name? error. I have placed the UDF in a module, placed the formulae in K1. I have mixed data from A1:A34. Function Used(r As Range) As Range Dim q As Range Set q = r.Parent.UsedRange.Cells(r.Parent.UsedRange.Cells.Count) Set Used = Intersect(r, r.Parent.Range(r.Parent.Cells(1, 1), q)) End Function =INDEX(A:A,SUMPRODUCT(MAX((LEN(USED(A:A))>0)*ROW(USED(A:A)))))
View Replies!
View Related
If Cell Doesn't Start With Asterisk Delete Row
Sub DeleteRowsBasedOnCriteria() 'Assumes the list has a heading. Dim cl As Range For Each cl In Range("A6", Range("A65536").End(xlUp)) If cl.Value <> "=~*" Then cl.EntireRow.Delete End If Next cl End Sub but it is deleting every row, I am not sure what is wrong? starting in cell A6 if cell does not start with *, then delete entire row, next cell that is the logic im seeing...ive tried a few o ther combinations like "~*" etc...
View Replies!
View Related
Conditionally Lock Row Based On One Cell's Contents
I'm trying to figure out how to lock a range of cells (all in a row) when some puts a specific character in one of the cells. I have a sheet where I want people to enter data. Once they put a 'C' in the last column to indicate that the entry is complete, the whole row should be locked so they can't change any of the cells for that entry. There are some good pointers already on the forum to help me get the basics: Conditional Cell Lock Unlock http://www.ozgrid.com/forum/showthread.php?t=66397 http://www.ozgrid.com/forum/showthread.php?t=76379 However, all of these point to specific cells rather than a range of cells that can be located close to the target of the change.
View Replies!
View Related
|
TRACKER
