Assigning Headers To Table According To File Name And Location
Aug 12, 2014
I need to assign headers to a table according to the file name and location. I have attached the example spreadsheet. Sheet1 contains the table with the data and Sheet2 assigns the headers to each file and location. The code is skipping headers and I can not figure it out.
I have a table that needs headers assigned to it. I have copied a link to view the example spreadsheets. The first sheet has the table and the second sheet has the headers. The code is designed to go to sheet 1 see what file name is being used and assign the header to the file name. Each file has two columns of data for Location 1 and Location 2, but have the same file name so it's assigns the first header, but ignores the second header. How to fix it so that it assigns it by the file name and also if it's Location 1 data or Location 2 data.
VB: Code: Sub FindHeaders() Dim iRowH, iColH, iRowD, iColD As Integer Dim strHeader, strData, strTitle As String
I am trying to develop a spreadsheet that will calculate a cost based on a matrix. I am attaching a sample of the calculation created so far. The end result is in cell M13 and is highlighted in yellow. I kind of layed the formula out in a few different cells, so hopefully it would be easy to follow.
simplify this process with maybe another formula that I might not be aware of, or maybe show me how to get this done in VB code. I think VB code would be the correct way to go just not sure.
I have a large table that I want to reconstruct. For simplicity sake, let's just says it's 3 rows (excluding headers) by 3 columns.
Item Description 1/1/2014 1/2/2014 1/3/2014
Cheese Burgers 2 3 4
Hot Dogs 5 12 6
Beverages 2 5 3
I want to reconstruct it so that the column headers become values in the table. The table headers are dates, in this case, if that gives clearer picture. So the new table would have 9 rows, (3 rows of data, excluding the header times four columns).
Item Description Date Quantity
Cheese Burgers 1/1/2014 2
Hot Dogs 1/1/2014 5
The above example is sorted by date but I would be indifferent if it's sorted by the Item Description.
Is there an easy way to do this? Pivot possibly? Again, my data table is large: 36 rows x 181 columns. Using the copy/paste/transpose feature is pretty impractical.
I have a long growing statistical report(18 pages + more), and 14 of the pages will use report table headers. I went into the page set up and selected the row to repeat on each page. I do not want the table headers on any pages after 14. The rest of the report is formatted differently and does not use the row headers. but all of the information is related. Is there a way to only show the row headers up to page 14? I can't use headers and footers, of course. The report will be set in one place and the user will print it out once a week. It seems as if this cannot be done but I this is my last resort.
I have a pivot that links to another tab, which has items categorised by Date ranges i.e. Date Group 1, Date Group 2, Date Group 3 and Date Group 4.
Sometimes none of the items will fall into a date group i.e. there is no date group 1's for that period, but my pivot simply removes the whoel date group 1 column when refreshed whereas I would like the pivot to always have the 4 headers and quote 0 if there is none in that category.
I have a requirement to download a lot of historical data files from the archieve of an website. The url goes something like this: [URL]....
This downloads file for 21022014 ie. 21-Feb-2014. I need to be able to have a facility to have a selection criteria on my user form (in excel) where I specify a date range and the macro automatically downloads all the valid excel files available within that date range (files for Saturday, Sunday and some holiday dates will not be available in the website archive database) one after the other (like at single clcik of button) into a specific location (predefined viz.. c:/Users/EOD files/) on my laptop. Best would be if I am able to select the save location run time by using a 'Browse' like feature where I go and choose my local laptop folder...same type when we try uploading a file from our laptop to the web..
I do routine tasks every day which involves opening 3 different files and pasting data into my main file. The data is always in the same format, and the 3 files are saved in the same location (3 different folders through). The 3 files are saved each day and the naming convention is constant, with only the date changing. For example, the files are always saved in C:My Documents and the files are called test_05.02.2013.xls. Tomorrow the file will be called test_06.02.2013.xls and so on.
So each day I will be rolling a file forward and I want to bring in the info from each of these files based on the new day.
How to do 1, and I will do the others (because the concept will be the same).
I've built a table that is meant to track the quality scores of multiple teams of agents. The agents are assigned to leads who are doing the quality monitoring. The goal is to track and trend the date the monitor is completed, the score of the monitor (scale of 1 - 12), who completed the monitor (initials in Lead column), and the running average score. The Score and Lead column are drop down validations.
This is being one of my first exploits into excel, so I am not sure if I built this correctly structurally, or what. When I go to create a pivot table off the data I have created, it's not calculating the values correctly. As an example if I want to count the number of 'score' for CCR1 it's always 1. From what I have been able to research is that this is because I have essentially repeated the headers multiple times. Below is what the table looks like so far.
I've done some searching and cannot find the right answer for my question. I need to create a formula that will pull column header text data based on cells within a table that contain a numeric value not equal to zero. The catch is that I cannot use any one specific numeric value as the basis for a Lookup.
I've attached an example spreadsheet for reference. Basically, I need two formulas:
1. Formula to pull column header (Receiver name) based on Sender. This is a necessity. 2. Formula to pull individual lines for those senders that have multiple receivers (Division D in my example).
My actual data file has 80+ senders and 100+ receivers.
I decided to format my data as a table so that excel will auto-fill my formulas when inserting new rows which works quite well. I have one snag though, when trying to insert a new row at the very top (i.e. inbetween the header and first row) and choosing Format As Below, it also applies Data Validation and Conditional Formatting to the header. The inserted row, however, is actually formatted fine and works well.
How do I stop this from happening, and why would Excel do this anyway (as it is effectively applying formatting to TWO rows when only one row is being inserted)?
I have a formula which assigns a points score to letters in a range and adds them up. In the example below F=0, P=6, M=12 & D=18. =IF( COUNTIF(AT5:BE5,"="""),"",SUM(COUNTIF(AT5:BE5,"=F")*0,COUNTIF(AT5:BE5,"=P")*6,COUNTIF(AT5:BE5,"=M")*12,COUNTIF(AT5:BE5,"=D")*18)). Thus if F, P, M & D were in cells A1:D1 the result would be 0+6+12+18=36.
My aim is to be able to customise the values of F, P, M & D, using a table and a cell value. See the table below, where the first number in each row represents a cell value which the user enters into BH1, the second, third, fourth and fifth numbers represents the values assigned to the letters F, P, M & D.
Some examples of expected output: user enters 10 into BH1 and then enters F, P, M & D in cells A1:D1 the result would be 0+1+2+3=6. user enters 90 into BH1 and then enters F, P, M & D in cells A1:D1 the result would be 0+9+18+27=54.
I have some excel sheets that are formatted like the following:
COMPANY | TOTAL | R | G | B company1 | 10 | 255 | 000 | 000 company2 | 20 | 000 | 255 | 000 company3 | 30 | 000 | 000 | 255 ... and so on...
My question is that I would like to have a macro that runs on this basic file and creates a bar graph with the data. Then it utilizes the RGB values in the columns to change the specific bar for that row. So setting the r, g, b as variables corresponding to the columns in the sheet. Also there isn't a preset number of rows in the files.
I have had my server removed that I had my default file location, when I go in to change any of my options the first thing it does is go look for this file location and brings back an error stating it cannot find the server. I cannot find anywhere else that I could change it.
way to construct my save file so that it saves to the correct location.
I have a a FileSearch that lookings in a specific Folder and the sub folders for a file type and then saves them to a different location. Here is the location of the save in regards to the original location...
Filesearch folder= C:path Savefolder=C:path he folder its found in & " excel converted"
If that makes any sense, basically I need to call the path of the file I opened, but not including the file name.
I am trying to write a macro which does a screen print of a couple of sheets in a spreadsheet. I created the macro using the recorder function and then trimmed it down a bit. However, when I run the macro it pops up with the box asking for a file location, and this is not something that the recoder function seems to write into the macro. I am not sure how to have the macro autofil the file location for the screen print. Is there anyone out there who can give me a hand with this? Thanks. The code for the macro is below...
Sub ScreenPrint() Sheets( Array("Sheet1", "Sheet2", "Sheet3")).Select Application.ActivePrinter = "Microsoft Office Document Image Writer on Ne00:" Selection.PrintOut Copies:=1, ActivePrinter:= _ "Microsoft Office Document Image Writer on Ne00:", Collate:=True Sheets("Sheet1").Select End Sub
I have an issue with saving the file at the desired location below is the code i have currently used . I have given the destination as "D:New folder". The new file does get saved at location "D:" but not inside the "D:New folder", instead names the file as "New folder".
I am trying to code where when someone hits the command button it will popup with the browse form and they find the location of the file and it puts there choice in a cell. don't know if it matters but the location would always be a picture. Here is what I have but it shows -1 in the cell
HTML Dim strFilePath As Variant strFilePath = Application.FileDialog(msoFileDialogFolderPicker).Show shUserInformation.Range("D12").Value = strFilePath
I have a template excel file that has links to data in another excel file in the same directory as the template. However, I save the template with a new name in a new folder and the link no longer works. The link changes to the location with the new file and of course the file I am trying to like to is not in that location.
The link shows the full path in the template file so I would think it would keep the full path when saving to a new location but the file doesn't.
I've been searching all morning through various posts on this subject, but I can't find anything that I can adapt to my needs. Here is the code I have:
ChDir "C:Documents and SettingsmynameDesktop" ActiveWorkbook. SaveAs Filename:= _ "C:Documents and SettingsmynameDesktopBook1.txt", FileFormat:=xlText, _ CreateBackup:=False
This file will be used accross multiple computers and therefore the directory will always change. What I need to hapen, is for this code to save the workbook in the same directory as the origional file. I also want the file name to refer to a cells value, as I will be having the user define the name through a userform.