I've a userform with 5 checkboxes and 1 botton
I need that every checkbox has a number associated so when i click in botton1
those values sum
e.g.: associate value 5 to checkbox1, 3 to checkbox2 and 10 to checkbox3, 4 to checkbox4, 13 to checkbox5
If I enable checkbox1 and checkbox2 in sheet("auxiliar").range("E5")=(5+10) after click botton1.
The Room ID values in Column A are associated with the Room values in Column B. I'm trying to move the values in Column A Room ID to Column G Room ID by having excel look up value in Column C Room or Area #, compare it to Room, associate that with Room ID and automatically fill in Column G Room ID. There are 1000s of these so it's not possible to do it by hand.
I attached a picture where i had 2 different workbooks. In reality, I'm working off of 2 worksheets within a workbook.Excel Question.jpg
Is there a macro that will allow me to create text to row from a comma separated cell, but also associate the cell to its left automatically?
The table below exemplifies what I need. The top of the spreadsheet is how my data is currently. The portion after the break is how I would like it to be.
I have over 600 rows that needs this done.
1,2,3,4
B
[Code]....
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View Relatedhow to obtain the "paid hours" formula on the "schedule" sheet?
View 5 Replies View RelatedIf cells A1 to A10 are filled with content and from range B1 to B10, only B3 and B7 are filled with content, I want Excel makes a string without spaces, just from the rows which have been filled in column A and B.
For example:
A B
1 car
2 tree
3 money tree
4 fruit
5 ball
6 food
7 water park
8 bread
9 joke
10 boat
The string I want Excel generates should be: moneytreewaterpark
So I need all the words in one string but Excel has to exclude every value from a row if the cell in column B is not filled with content. If the string is generated, is it possible to make an hyperlink from this string and open automatically in internet browser?
I have a sheet with many active x check boxes already created but with visibility off. I want code that turns on the visibility, repositions, and checks certain check boxes whose name is based on values in an array named configs.
Here is the code with the problem line indicated:
[Code] ........
The repositioning and visibility work fine. I get an "object doesn't support property or method" error on the indicated line. What is the proper syntax to do this?
Using Excel 2007, how can I associate a recurring name in one column with one and the same number in another?
Ex.: "Jones" in C8 = "1" in G8
"Smith" in C9 = "1.5" in G9
"Williams" in C10 = "2.5" in G10
I hope my question is clear enough.
I have a spreadsheet that has "Branch" Information starting below the heading in Cell C6.
I want to associate the information in the subsequent cells to a corresponding Sector that will be populated in column B6 onwards.
Example:
If the cell Cx has IMTB in it, then cell Bx will be Ops.
There are 6 Main Sectors - (CS, CSM, DM, CBSA, OPS, SPP) that need to be populated into Column B based upon one of the multiple possible Branches that are in Column C. the branch will fall under any ONE of the Sectors.
Essentially, I need to run a loop through, while statement, or something that will generate a true or a false for the entire column and then populate the empty column.
I have an assigned value of 10 to each checkbox that is checked. If the checkbox is selected I want to automatically sum the totals in a cell on my active sheet. Checkboxes are activeX placed directly on a worksheet. I currently have a work around but considering the number of checkboxes I have, coding is going to be a nightmare as I would have to code each one separately. Right now I am summing each box on another sheet and linking the summed total back to active sheet.
[Code] ....
I would like to do all check boxes with one code and sum the total in the active sheet in cell "I7". The set of checkboxes is 1 to 26.
I have a user form that has 12 check boxes corresponding to the months on the year. All or none of the check boxes can be ticked at the same time. How can I get the value of the check boxs to one cell on the worksheet.
ie. Check boxes 'Jan', 'Feb', 'June' and 'Oct' are ticked. On the worksheet, cell A1 would say 'Months chosen: Jan, Feb, June, Oct'
I have a userform with 54+ textboxes and and a checkbox. I would like to change the value of the checkbox from true to false using the keyboard when any of the textboxes have the focus. I can do this using a 'IF keycode' routine but I have to paste the code into each textbox. Is there a way of having the code in one place only, to prevent duplication?
View 2 Replies View RelatedI have a source data tab laid out like this:
QC Date.......Policy#......Associate.......Pass/Fail......1stError.....2ndError.....3rdError
QC'ers can enter up to 3 different error types committed on a single failed policy, thus the reason for 3 error fields, even though all 3 fields offer the same value list selections (ie ErrorTypeA, ErrorTypeB, ErrorTypeC......). A policy, whether it has one error or three errors assigned, should only count as a single fail against the associate.
My problem comes into play when attempting to pivot the data. I would ideally like to see the pivot table in this format:
(filter)Associate
(filter)QC Date
...
ErrorTypeA.......Count
ErrorTypeB.......Count
ErrorTypeC.......Count
ErrorTypeD.......Count
Where the "count" is the total number of occurances of that error type across all three error fields - 1stError, 2ndError, 3rdError.
But since 1st/2nd/3rd error fields are different columns, I am unable to do a single count.
My pivot ends up looking something like this:
1stError.....ErrorTypeA.......Count
1stError.....ErrorTypeB.......Count
1stError.....ErrorTypeC.......Count
1stError.....ErrorTypeD.......Count
Then repeated for the 2ndError and 3rdError fields.
I have a workbook with 4 drop down lists. The selection in list 1 determines what is shown in list 2. I wish to have list 3 dependant on list 1 also, but don't know how to associate 2 drop down lists with the same previous cell.
The first list is in cell C2 and the table of data needed for list 3 is AC8:AC27-AO8:AO27,including the column titles.
I have a master worksheet that contains a lot of datas. Example below:
Invoice # Code Customer Money
1 1101 a 10
2 1102 a 20
3 1102 b 30
4 1103 c 40
5 1104 d 50
6 1101 a 60
7 1103 c 70
After creating a pivot table with code, customer as Row and money as Data, I get this:
Sum of money
Code Customer Total
1101 a 70
a Total 70
1102 a 20
a Total 20
b 30
b Total 30
1103 c 110
c Total 110
1104 d 50
d Total 50
Grand Total 150
Suppose now, I have another data named Rate that I need to associate with each pair of Code and Customer. See below:
Sum of money
Code Customer Total Rate..................
I am copying a large table of data from a report generated in Firefox and pasting it into Excel 2010. The data has several columns of html checkboxes. I need to do two things with the checkboxes and would like to do a third:
1: Count how many checkboxes are ticked in each of the columns.
2: Compare a column A of checkboxes to a column B containing numbers, and then both count and highlight any row where the checkbox is ticked but column B is a 0.
3: (optional) I would like to erase the html checkboxes and, if the box was checked, replace it with a regular x in the underlying cell.
I found some code on another forum that generates a list of values for each checkbox (vba - Obtain the value of an HTML Checkbox inserted in Excel worksheet - Stack Overflow).
Based on that, I recorded a macro to extract the html Name of a single checkbox and then set up a Vlookup for the True/False value. However, I can't figure out how to automate a vlookup for every individual checkbox and put the data in the appropriate underlying cell.
married, widows, single checkbox is selected
macro solution
good work.
I have 3 checkboxes; when one is checked, a set/range of rows should be visible. Only 1 checkbox should be checked at a time.
If checkbox 18 is already checked, and checkbox 20 is then checked, I want the first checkbox unchecked and the rows for checkbox hidden.
I'm using the following code. It works great as long as I check and uncheck the same box before attempting to check another box. But if Checkbox18 is already checked with its rows showing, and I then check checkbox20, the checkbox20 sub runs and as I step through, it jumps to sub checkbox18.
How can I stop my subs from jumping from one to another?
Code:
Private Sub CheckBox18_Click()
If CheckBox18.Value = True Then
Worksheets("TRF").Rows("36:41").Hidden = False
Worksheets("TRF").Rows("42:64").Hidden = True
Worksheets("TRF").Rows("65:76").Hidden = True
CheckBox19.Value = False
[Code] .........
How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.
In my userform I have a list of check box's that can be selected. Currently if more than one is selected, they will appear in the spread sheet in the same line one after another with a space between them. How do I make it so they either appear with a comma appearing after each, so the next value appears on the next line below or most perferably the cell turning to a drop down list with the values?
Current code
VB:
If CheckBox1.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox1.Caption
If CheckBox2.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox2.Caption
If CheckBox3.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox3.Caption
If CheckBox4.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox4.Caption
If CheckBox5.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox5.Caption
If CheckBox6.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox6.Caption
Spreadsheet current cell appearence if all 6 are selected ' Chinnook EH101 Lynx Puma Sea King Fixed Wing'
Required appearence:
Chinnook
EH101
Lynx
Puma
Sea King
Fixed Wing
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
I have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
View 6 Replies View RelatedI would like to be able to associate data in one column with data in several others....This is not a problem-Cell A59 -"X "&D59
Next I need Cell A60 to reference E59 in a formula -"Y "&E59
From this point on several more cells in the A column will reference different columns all on line 59.
Here's the part that is difficult-Next I need to be able to highlight the whole "group" (all the cells in column A so far) and drag on them to create this "group" over and over again but in each group I need to increment the line references-D60,E60-that is used for the group....Does that make sense? I realize I cant accompish this by using the offset function but there has to be a better way! ...
On the attached Dynamic chart I have attached there are 3 checkboxes to display certain data. My issue is this, if I click the outside checkbox and the ISE checkbox at the same time that is OK, it gives me a comparison of the two data sets in a bar chart. Perfect. If I click just the total checkbox it gives me the total info of the outside and ISE, again perfect.
But, If I click all 3, it doubles all the numbers because total is total and outside + ISE also equals the total.
My Question,
-Is there a way to lock out a checkbox if another is active?
if 1 then no 2 or 3. if 2, 3 is OK but 1 is not. if 3 then 2 is ok but 1 is not?
-If it can't be locked can it do something like; If #1 has a check and you try to enter #2 a red error message could come up saying these two choices together the data will be inaccurate. I'm thinking this might be done in conditional formatting.
If option one is doable and easy, is it also possible to have an error message like in my second idea so people will know why they can't click that second box? This would be my preferred fix but I am open to any other option you may have to accomplish this.
I want to turn on (tick) a check box from within a macro.
Checkbox reference. I am using the following code
View 4 Replies View RelatedI have 20 check/tick boxes on my worksheet (CheckBox1-20), each of the 20 tickboxs has its own linked cell A1-A20 - I wish to have another checkbox (checkbox21) that, when ticked will tick all of them.
Also, if unticked it will untick the 20. I'd like this to be a kind of "onclick" command - so that if I wanted to tick 5 of the 20 on their own, the "master" tick box won't interfere with this. If a command button is easier to code than this is just as good.
I've been looking online on on here for the last 2 hours with no joy, not even getting close.
I am using Form Controls rather than ActiveX controls.
I'm trying to check the value of a checkbox that I created in my workbook, but both of the if statements below say "Object does not support this property or method"
View 6 Replies View RelatedI have a RibbonX checkbox that I have added to my ribbon. I am able to attach code to the OnAction callback and when the user clicks the box, the code executes properly. Now for my issue. How can I change the checkbox from checked to unchecked and vice versa within VBA?
My situation is this:
I store a list of employees with certain elements such as start date, department, title, etc. in a table. One of the fields is Inactive which shows whether they are active or inactive. I may want to see all the employees, or just the active ones. My checkbox will allow the showing of both inactive and active employees. The user may wish to save the default setting for this and so I have created a table that holds a Boolean True or False for whether to show inactive employees or not by default. The checkbox always shows unchecked by default when the workbook loads, and I want to change the textbox's checked state based upon the value in the table.
I need to have a check box, that when it is checked the user must fill in a cell.
View 9 Replies View Related