Select All Checkbox
Oct 28, 2009
I have 20 check/tick boxes on my worksheet (CheckBox1-20), each of the 20 tickboxs has its own linked cell A1-A20 - I wish to have another checkbox (checkbox21) that, when ticked will tick all of them.
Also, if unticked it will untick the 20. I'd like this to be a kind of "onclick" command - so that if I wanted to tick 5 of the 20 on their own, the "master" tick box won't interfere with this. If a command button is easier to code than this is just as good.
I've been looking online on on here for the last 2 hours with no joy, not even getting close.
I am using Form Controls rather than ActiveX controls.
View 6 Replies
ADVERTISEMENT
Dec 27, 2013
I have a sheet that have 100 checkbox. i want to select(not check) all checkbox for change their property.
How can I select all? (by macro or other way)
View 8 Replies
View Related
Aug 22, 2008
I am trying to write a macro for an option button, that when selected it checks to see if another option button is selected then continues to automatically change the value of 5 other option button within in 5 other group boxes
Sub SetFilter()
'check to see if filtering is required
If Sheet1.Shapes("Option Button 54").value = True Then
'set non-specific filtering
Sheet1.Shapes("Option Button 28").Value = xlOn
Sheet1.Shapes("Option Button 38").Value = xlOn
Sheet1.Shapes("Option Button 44").Value = xlOn
Sheet1.Shapes("Option Button 52").Value = xlOn
End If
End Sub
View 2 Replies
View Related
May 31, 2009
I have a checkbox linked to cell F2, True=LH (Left Hand) and False = RH.
If I select RH I want to use the valadation list O3:O9, If I select LH I want the list to be Q3:Q9. Is this possible without using code? I am now using two other cells, one for each list RH & LH but it would be more convienant to ckeck the box and have the correct list available.
View 6 Replies
View Related
Oct 1, 2006
How do i check a checkbox on an excel worksheet?
View 5 Replies
View Related
Feb 25, 2009
married, widows, single checkbox is selected
macro solution
good work.
View 5 Replies
View Related
Apr 16, 2014
I have 3 checkboxes; when one is checked, a set/range of rows should be visible. Only 1 checkbox should be checked at a time.
If checkbox 18 is already checked, and checkbox 20 is then checked, I want the first checkbox unchecked and the rows for checkbox hidden.
I'm using the following code. It works great as long as I check and uncheck the same box before attempting to check another box. But if Checkbox18 is already checked with its rows showing, and I then check checkbox20, the checkbox20 sub runs and as I step through, it jumps to sub checkbox18.
How can I stop my subs from jumping from one to another?
Code:
Private Sub CheckBox18_Click()
If CheckBox18.Value = True Then
Worksheets("TRF").Rows("36:41").Hidden = False
Worksheets("TRF").Rows("42:64").Hidden = True
Worksheets("TRF").Rows("65:76").Hidden = True
CheckBox19.Value = False
[Code] .........
View 9 Replies
View Related
Dec 14, 2008
How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.
View 6 Replies
View Related
May 9, 2006
I have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
View 6 Replies
View Related
Oct 30, 2012
I have a multiselect listbox with values that gets populated from a sql statement, and I would like to get is the first or second index from the selected item. I know how to get the listindex from a combobox by using:
VB:
cbnumber.List(.ListIndex, 0)
How can I loop through and get the 1st index number for the selected items only from the listbox? I want to pass this index number to another sql statement.
View 5 Replies
View Related
Jul 7, 2008
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies
View Related
Oct 4, 2007
I have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
View 9 Replies
View Related
Nov 16, 2006
I need to get a macro to select all the data in column "A", sort it in ascending order, omit the blanks if any, then select (highlight) all the data so that another macro can be run.
When I record it, it will only record up to the last row I highlight but the data always changes so there could be more or less.
View 9 Replies
View Related
Aug 13, 2007
I have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
View 9 Replies
View Related
Oct 28, 2008
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies
View Related
Jul 6, 2013
On the attached Dynamic chart I have attached there are 3 checkboxes to display certain data. My issue is this, if I click the outside checkbox and the ISE checkbox at the same time that is OK, it gives me a comparison of the two data sets in a bar chart. Perfect. If I click just the total checkbox it gives me the total info of the outside and ISE, again perfect.
But, If I click all 3, it doubles all the numbers because total is total and outside + ISE also equals the total.
My Question,
-Is there a way to lock out a checkbox if another is active?
if 1 then no 2 or 3. if 2, 3 is OK but 1 is not. if 3 then 2 is ok but 1 is not?
-If it can't be locked can it do something like; If #1 has a check and you try to enter #2 a red error message could come up saying these two choices together the data will be inaccurate. I'm thinking this might be done in conditional formatting.
If option one is doable and easy, is it also possible to have an error message like in my second idea so people will know why they can't click that second box? This would be my preferred fix but I am open to any other option you may have to accomplish this.
View 4 Replies
View Related
Apr 13, 2008
I want to turn on (tick) a check box from within a macro.
View 9 Replies
View Related
Mar 11, 2009
Checkbox reference. I am using the following code
View 4 Replies
View Related
Jan 7, 2010
I'm trying to check the value of a checkbox that I created in my workbook, but both of the if statements below say "Object does not support this property or method"
View 6 Replies
View Related
Jul 13, 2012
I have a RibbonX checkbox that I have added to my ribbon. I am able to attach code to the OnAction callback and when the user clicks the box, the code executes properly. Now for my issue. How can I change the checkbox from checked to unchecked and vice versa within VBA?
My situation is this:
I store a list of employees with certain elements such as start date, department, title, etc. in a table. One of the fields is Inactive which shows whether they are active or inactive. I may want to see all the employees, or just the active ones. My checkbox will allow the showing of both inactive and active employees. The user may wish to save the default setting for this and so I have created a table that holds a Boolean True or False for whether to show inactive employees or not by default. The checkbox always shows unchecked by default when the workbook loads, and I want to change the textbox's checked state based upon the value in the table.
View 1 Replies
View Related
Dec 10, 2006
I need to have a check box, that when it is checked the user must fill in a cell.
View 9 Replies
View Related
Aug 25, 2009
Create a macros, which sets any checkbox in the next excel file
fist link
http://narod.ru/disk/12388811000/car_test.xls.html
or another link of the same file
http://rapidshare.com/files/271305333/car_test.xls
I can't find the name of any checkbox.
View 9 Replies
View Related
Oct 6, 2009
I have a sheet with a number of checkboxes, and I need to conditionally enable/disable some of them.
For example, if the user checks Box1, then the question for Box2 becomes relevant and Box2 becomes available. If Box1 is unchecked, Box2 needs to be unchecked and disabled.
View 9 Replies
View Related
Nov 2, 2009
Can it be made in VBA as follows:
I have made a userform with the initialize routine. On this there are checkboxes which I would like to be selected for a YES.
When the YES (checkbox) is being selected I than would like to see in the active userform an already made and "hidden" textbox to enter a value for confirmation of a quantity to order.
I have been loking for some sort of Private Sub Userform Change() routine, but can not find this type of routines
View 9 Replies
View Related
Dec 8, 2009
i want to create a chart ,the chart have a checkbox beside it.
so i can check which line to display....
example
test1 (group112data,group113data)
test2 (group112data,group113data)
then the chart selection is to select 1 then it will diplay group112 result (test 1 and test2),this is to make comparison
can i do it for normal chart?
or must use pivot chart?
View 9 Replies
View Related
May 10, 2007
I have a check box whithin a worksheet. This CheckBox doesn't have any linked cell, and doesn't have any macro asigned. know I would like to refer to the value of the checkbox by vba kind of: ?ActiveSheet.Shapes("CheckBox1").value=true 'from the vba's inmediate window
View 4 Replies
View Related
May 14, 2014
I have a userform1 with textbox1, checkbox1, checkbox2, checkbox3 and checkbox4. What i want to accomplish is
[Code]....
View 3 Replies
View Related
Aug 4, 2014
I am trying to use VBA to change the caption of checkboxes in "Sheet 2" when I change the value of a cell "A1" in "Sheet 1".
This code is working:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
Worksheets("Sheet 2").CheckBox1.Caption = "New Caption"End Sub
But there are 6 checkboxes in Sheet 2 and I would like to do something like this:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
For i = 0 to 5Worksheets("Sheet 2").Control("CheckBox" & i+1).Caption = "Box" & i+1Next iEnd Sub
This doesn't work.. So I guess the Control-function is wrong.
View 3 Replies
View Related
Feb 16, 2014
I have drop-down list in cell C4 and inserted Checkbox next to it. Drop-down list has a blank default value. I want Checkbox to be ticked If value in C4 is not blank. My code so far is:
[Code] ......
I attached sample spreadsheet : EF989727_re.xlsm
View 12 Replies
View Related
Sep 21, 2008
I have a command button and ten checkboxes - one for each row of a list. I need a macro that will delete the rows of every checked checkbox when I press the command button.
The list starts in row 3 and continues to row 12. Checkboxes are checkbox1 for row 3 to checkbox10 for row 12.
View 9 Replies
View Related
