Associate The Information In The Subsequent Cells To A Corresponding Sector
Jan 19, 2009
I have a spreadsheet that has "Branch" Information starting below the heading in Cell C6.
I want to associate the information in the subsequent cells to a corresponding Sector that will be populated in column B6 onwards.
Example:
If the cell Cx has IMTB in it, then cell Bx will be Ops.
There are 6 Main Sectors - (CS, CSM, DM, CBSA, OPS, SPP) that need to be populated into Column B based upon one of the multiple possible Branches that are in Column C. the branch will fall under any ONE of the Sectors.
Essentially, I need to run a loop through, while statement, or something that will generate a true or a false for the entire column and then populate the empty column.
View 9 Replies
ADVERTISEMENT
Apr 22, 2007
I have a list of values of sheet titled "exclusives" column B Row 2 to Row 250.
Hence, if any of these values are found in sheets "1", "2", "3" and "4" in column C (of each sheet) replace the existing value with "Brand".
In addition after this bit I then need it to look up every new "Brand" and for the eight columns preceding (after) the new value I need to be cleared (any entries in those columns in that specific row of the "Brand" value deleted).
View 9 Replies
View Related
May 9, 2013
Say I have (cell A1) 10 salespeople and they each sell a (A2) $100/month membership, so I have (A3) $1,000 monthly revenue.
(A4) is an assumption about how many months the average person will stay a member.
So if A4 = 6, (6 month membership assumption) how would I get Excel to output $1,000 (the result from A3) into cells B3 through B8
but then for instance if A4 = 3 (3 month membership assumption) it would only output the the $1,000 result from A3 into cells B3 through B5
So like A1 through A4 of...
10
$100
$1,000
6
would output $1,000 into B3 through B8
but
10
$100
$1,000
3
would output $1,000 only to B3 to B5
View 1 Replies
View Related
Jan 1, 2014
how to obtain the "paid hours" formula on the "schedule" sheet?
View 5 Replies
View Related
Nov 3, 2011
I've a userform with 5 checkboxes and 1 botton
I need that every checkbox has a number associated so when i click in botton1
those values sum
e.g.: associate value 5 to checkbox1, 3 to checkbox2 and 10 to checkbox3, 4 to checkbox4, 13 to checkbox5
If I enable checkbox1 and checkbox2 in sheet("auxiliar").range("E5")=(5+10) after click botton1.
View 1 Replies
View Related
Dec 3, 2011
Using Excel 2007, how can I associate a recurring name in one column with one and the same number in another?
Ex.: "Jones" in C8 = "1" in G8
"Smith" in C9 = "1.5" in G9
"Williams" in C10 = "2.5" in G10
I hope my question is clear enough.
View 2 Replies
View Related
Jan 27, 2010
I have a source data tab laid out like this:
QC Date.......Policy#......Associate.......Pass/Fail......1stError.....2ndError.....3rdError
QC'ers can enter up to 3 different error types committed on a single failed policy, thus the reason for 3 error fields, even though all 3 fields offer the same value list selections (ie ErrorTypeA, ErrorTypeB, ErrorTypeC......). A policy, whether it has one error or three errors assigned, should only count as a single fail against the associate.
My problem comes into play when attempting to pivot the data. I would ideally like to see the pivot table in this format:
(filter)Associate
(filter)QC Date
...
ErrorTypeA.......Count
ErrorTypeB.......Count
ErrorTypeC.......Count
ErrorTypeD.......Count
Where the "count" is the total number of occurances of that error type across all three error fields - 1stError, 2ndError, 3rdError.
But since 1st/2nd/3rd error fields are different columns, I am unable to do a single count.
My pivot ends up looking something like this:
1stError.....ErrorTypeA.......Count
1stError.....ErrorTypeB.......Count
1stError.....ErrorTypeC.......Count
1stError.....ErrorTypeD.......Count
Then repeated for the 2ndError and 3rdError fields.
View 4 Replies
View Related
Jan 8, 2012
I have a workbook with 4 drop down lists. The selection in list 1 determines what is shown in list 2. I wish to have list 3 dependant on list 1 also, but don't know how to associate 2 drop down lists with the same previous cell.
The first list is in cell C2 and the table of data needed for list 3 is AC8:AC27-AO8:AO27,including the column titles.
View 2 Replies
View Related
Feb 1, 2007
I have a master worksheet that contains a lot of datas. Example below:
Invoice # Code Customer Money
1 1101 a 10
2 1102 a 20
3 1102 b 30
4 1103 c 40
5 1104 d 50
6 1101 a 60
7 1103 c 70
After creating a pivot table with code, customer as Row and money as Data, I get this:
Sum of money
Code Customer Total
1101 a 70
a Total 70
1102 a 20
a Total 20
b 30
b Total 30
1103 c 110
c Total 110
1104 d 50
d Total 50
Grand Total 150
Suppose now, I have another data named Rate that I need to associate with each pair of Code and Customer. See below:
Sum of money
Code Customer Total Rate..................
View 2 Replies
View Related
Mar 30, 2009
I have a single-column list. The column header is 'ID'... records within this column repeat sometimes (this is ok). I need a worksheet function that will allow me to mark the second, third, or fourth duplicate, but leave the first duplicate alone or unmarked. I have searched the Web and this forum, and came up empty. If this cannot be done with a worksheet function, then VBA is welcome. No ColorIndex.
View 2 Replies
View Related
Aug 31, 2012
Is there a built-in function in Excel to sum subsequent numbers, starting from 1?
If I give for example 5 as input value to the function, it should return 1+2+3+4+5 = 15.
If I give 3 -> it should return 1+2+3 = 6 and so on.
View 2 Replies
View Related
Jul 9, 2007
I am building simple worksheets that consist of weekly time sheets. In cell B7 is the week ending date for that week. When I copy the worksheet onto a new worksheet, I want B7 of the new worksheet to be the week ending date 7 days later.
View 9 Replies
View Related
Mar 27, 2013
I'm trying to find a way of filling in a "form" on sheet1 and for that information to populate into the next empty row on sheet2. This would then give me a table of information in sheet2 generated from multiple entries into sheet1.
View 5 Replies
View Related
Nov 6, 2012
I have many dates in rows. I want to get the subsequent month from the date in each row in "mmm-yy" format.
15/10/12 should give me "Nov-12" though it is "Oct-12".
To get "Oct-12", I use =Text(cell,"mmm-yy"). What should I add to this formula to get "Nov-12"
View 4 Replies
View Related
Nov 2, 2009
Cell C10 contains 2 possible values, "CLIENTS" or "INDIRECT"
These are also the names of 2 dynamic named ranges
I am trying to use a COUNTIF to validate a subsequent cell, checking if the contents appear in the original list.
=COUNTIF(INDIRECT(C10),D10)
Checks to see if the value entered into D10 is within the dynamic named range, the name of which is entered into cell C10
Gives me a #Ref error
View 9 Replies
View Related
Mar 9, 2014
I have a table similar to the table on the left, and I need to convert it to something like what is on the right. Ultimately I will concatenate the numbers in the table on the right too with commas between, so if for some reason it's easier to go straight to that, that's an option.
So in the example below, states will be listed multiple times with a unique number next to it each time. The state may be listed up to say ten times or as little as one. Each time it is listed, it will have a different number next to it. I need to reformat this into one where each state is only listed once, and each possible number is next to it in one row.
20z3fwk.jpg
View 4 Replies
View Related
Dec 5, 2007
I want to copy a range of cells and paste them in two different locations and have the new cells relate in data using a command button. This button would be clicked an infinite amount of times to provide the amount of copies desired and to be pasted underneath the previous copy. Example:.............
View 3 Replies
View Related
Jul 25, 2014
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
View 2 Replies
View Related
Jun 17, 2013
I have just added two date and time picker controls to my spread sheet to allow the user to select the date range.
They are linked to cells C9 & C10.
The problem is that the formula I using to check whether the first selection pre-dates the second has stopped calculating correctly when using the date and time pricker controls.
The formula is:
=IF(C9>C10,"Error","OK")
I have checked it on the same sheet by just typing the dates in and it works fine...I have tried formatting cells C9 & C10 to short date, general, text, number but it still does not calculate correctly.
View 5 Replies
View Related
May 22, 2014
I'm having some problems with the removal of duplicate values in a time series. The time series consist of stock data for about 10000 firms, but about 3000 of these firms died(delisted) before the end of the sample. The database I used to extract these data, however, does not remove the firm values from the sample, but keeps the last known value of the firm for the remainder of the time. Therefore, I need to remove these duplicate values, but only if they are sequential. Furthermore, normally if you remove duplicate values, excel will delete the cell and shift the data upwards, since it's a time-series I would rather have excel just blanking out the cell instead of removing it.
I've looked at normal solutions, like using the countif functionallity in excel, but this is not feasible because of the size of the worksheet, also, it does remove non-sequential duplicate values as well.
summary:
- Want to remove duplicate values, but only sequential values.( It's possible firm value is the same somewhere in the time period)
- The cells should be blanked out instead of deleted.
View 2 Replies
View Related
Oct 3, 2007
I have a program that uses the Document Open event to display a custom form. This program is being used on about 50 computers for the past 8 years with no problems. One user has a problem now. They can open the program once and the code fires. But when the user tries to open the same file a second time, the "Microsoft Excel has encountered a problem and needs to close" dialog box is displayed. The document that is recovered has no vba modules and no code in the Document open event. I've uninstalled and reinstalled Office Professional. Shut down all firewalls.
View 9 Replies
View Related
Feb 15, 2008
I have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp()
'
' EmployeeExp Macro
' Macro recorded 12/02/2008 by eugene.cross
'
Dim i As Integer
Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
View 7 Replies
View Related
Dec 2, 2008
I have users filling in data in columns C and D, I need a macro which will select everything entered and lock those cells - well the catch is, if both columns have data. If column C or D are empty I need that row to remain unlocked. No sorting can occur as well.
View 2 Replies
View Related
May 16, 2013
Is there a macro that will allow me to create text to row from a comma separated cell, but also associate the cell to its left automatically?
The table below exemplifies what I need. The top of the spreadsheet is how my data is currently. The portion after the break is how I would like it to be.
I have over 600 rows that needs this done.
1,2,3,4
B
[Code]....
View 3 Replies
View Related
Oct 29, 2007
I would like to know how i get excel to put information from say I7 into I94. i want it to be exactly the same information - and its not always a number. It could be a number, or text or a date?
View 2 Replies
View Related
Apr 23, 2014
I'm trying to extract information from a cell that I cut and paste from another source:
09/02/2014-12/11/2014 Lecture Tuesday, Thursday 08:00AM - 09:15AM, Nichols Engineering Hall, Room 441
Each cell is different in that it may be a different day or time:
09/02/2014-12/11/2014 Lecture Tuesday, Thursday 08:00AM - 09:15AM, Nichols Engineering Hall, Room 434
I want to make a formula that will extract the pertinent information (day of the week and time), and store it to another 2 cells, making a list as it "extracts":
Day
Time
Tuesday
8:00 - 9:15
Thursday
8:00 - 9:15
View 8 Replies
View Related
Aug 6, 2007
I have rows of cells with the following information..
Row 1, Column 1: Address City/State
Example: 111 Old Creek Road Stanton, VA 25523
Is there any way to separate the Address and the City/State? I would much rather the spreadsheet be in the following format.
Row 1, Column 1: Address
Row 1, Column 2: City/State
or ..
Row 1, Column 1: 111 Old Creek Road
Row 1, Column 2: Stanton, VA 25523
I'm just wondering if there's a fast way to do this, or if I have to go in and do it manually - the reason i'm looking for a faster way to do this is because I have approximately 3000 rows to do it to. :shrugs:
View 9 Replies
View Related
Mar 13, 2014
Can I use part of the data in a column of cells to sum data in a column.
E.g. I want to sum valves in Column V that match the Data in Column T by using the following cells CB 1A1x, CB 1A2x, CB 1a3x CB 1A5, etc etc CB 1B3x...... to obtain the totals
For CB 1A1, CB 1A2, CB 1A3 etc etc.
Capture.JPG
View 10 Replies
View Related
Feb 10, 2009
My goal is to create a pair of validation lists. The first will allow you to select what craft you are using (i.e. Alchemy). That will bring up the second list which will allow you select what recipe you are using (i.e. Black Ink). From here, I want the spreadsheet to automatically fill out what ingredients are in the recipe, the skill levels needed to complete the recipe at 100% success, and what the yield is each time successfully complete the craft.
The first part is easy, using the INDIRECT function to pull up a second list from the first. I have no idea how to make the other cells fill out, or even how to structure the data to make it accessible.
View 5 Replies
View Related
Feb 25, 2009
I have column A full of test numbers, and column D is revisions the tests show up in (4 different versions). I would bring this spreadsheet down from 1800 rows to around 500 rows by making the info on D appear on one line in columns E,F,G,H, rather than four rows.
Example:
This
_A__|__B__|__C__|__D__|
1001|_____|_____|v1.0
1002|_____|_____|v1.0
1002|_____|_____|v1.1
1002|_____|_____|v2.0
1003|_____|_____|v1.0
1003|_____|_____|v1.1
1004|_____|_____|v1.1
1005|_____|_____|v1.0
1005|_____|_____|v1.1
1005|_____|_____|v2.0
1005|_____|_____|v2.1...................
View 5 Replies
View Related
