Auto Detect And Label The Peaks And Bottoms Of A Graph?
Jun 30, 2014
I was wondering if excel can auto label peaks and bottoms of a graph? Let me go further:
I have a graph that has one data number for every day of the year (365). This is a natural up and down curve, similar to a stock.
Can excel find the key high and low points? I have attached an example. In it you will see I have quickly labeled the key tops and bottoms. CHART TEST.xlsxCHART TEST.xlsx.
I basically omitted the peaks/bottoms that are very short term and irrelevant.
View 2 Replies
ADVERTISEMENT
Jan 15, 2013
I have a data set consisting of three columns. Column A is a name, B is an x-axis value, and C is an y-axis value.
I use the B and C column to plot the positions in an X/Y point diagram. This is working nicely. But is there a way for me to get the value in the A column as the label for the data? Or in some other way shown with mouse over or similar?
Dataset could look like:
A
B
C
Jensen1
14
150
[Code] .......
View 6 Replies
View Related
May 22, 2006
My Excel spreadsheet is linked to an Access database to Get external Data. When the data is periodically refreshed ,while the spreadsheet is open, I need to automatically detect it so that a macro can be run each time to format the new data.
The Excel data is not a pivot table. The spreadsheet is for display of data only (no user updating).
View 5 Replies
View Related
Mar 8, 2013
When i enter a value in an excel sheet cell ,Excel auto detect the data type and format that cell to that data type.
For example if i enter 4/4001, excel read it as date and convert the cell format from general to date and displays 4-Aprl.
However if i precede with " ' " this problem is solved but my question ios that can i permanently disable this auto detect option?
View 4 Replies
View Related
Nov 12, 2006
i have a set of data range from B1 to K10 (10 cells all together).
and i created a graph by selecting from B1 - K10.
what i want is, if i key in range from 1-10 in A1, the graph will change based on the number i keyed in (from 1-10).
if i keyed in 5 in A1, the graph will auto select B1 to F1 and show data from B1 toF1
then if i select 6 in A1, the graph will auto select B1 to G1 and show data from B1 to G1
View 9 Replies
View Related
Aug 21, 2008
I have a Line Graph with 2 lines on it. Is it possible to write a macro to extend the range (Source range) of one of the lines ? I would also like to add a Data Label to the newly added point.
For e.g. If I have Line 1 graph only till 65, I want the macro to extend the range by one row to include 95 and also display a datalabel ......
View 9 Replies
View Related
Jun 9, 2006
I have a graph that is showing the date on "Y" axis and a value on "X" axis, when I add a new date and value to my data the graph does not update, it just shows the data when I first created the graph.
How do I get the graph to display the new data I entered ?
I created a line graph by clicking on the "A" in column "A" (Thats where my date is) then clicking on the "B" in column "B" (Thats where my values are) and clicking the create graph button then clicked finished.
View 6 Replies
View Related
Oct 31, 2006
after spending hours searching the forum, I begin to seriously doubt my ability to even formulate a suitable search question. My problem SHOULD be a known one, but I am unable to find any clues. Here we go:
I have made a pretty stright-forward forecasting model. It is used to calculate economics of a coal fuelled power plant (even though that shouldn't matter). The outcome is, among other things, a single number for Profit / MWh in Euros. There are several input data, such as fuel price, price for CO2 emission rights, operational expenditure, capex, etc.
My idea, then, is to lock all in-data parameters except ONE, then let this variable vary incrementally and then produce a new small table with a) the variable data (example: price for CO2 rights ranging from 10 to 50 Euro in 2 euro steps), and b) the resulting net profit in each case. Ideally, I wish to be able to chose which indata to lock and which to vary, i.e. solution need to have certain flexibility.
NB: The calculations are not that simple, i.e. I cannot use a simple formula - I need to use the exising output cell(s) to feed data.
How do I do this?
The outcome should be basically two rows with a suitable number of columns (or the other way around, two columns in X number of rows). The table will then be used to produce illustrative graphs.
I guess I could hard code a table by simply enter data, but heck, that's not the way to use Excel!
View 9 Replies
View Related
May 5, 2009
I've collected some data from a GPS logger regarding the speed of an athlete. I want to calculate how many sprints this particular athlete undertook during a training session.
Sprinting is defined as a speed of > 20 kph.
One sprint would be the attainment of one peak >20 kph before decreasing below 20 kph.
It's easy to identify the 3 peaks and thus sprints from the xy scatterplot in the attached file, but I'm struggling to find a way to calculate this.
View 11 Replies
View Related
Feb 23, 2010
to calculate the difference between peaks in an excel graph, but i need to do it between every two peaks.. I was just wondering could anyone tell me how to do this with some sort of formula or a vba file
Ive attached a picture. I need to calculate the difference between the blue peaks along the x-axis.
View 9 Replies
View Related
Dec 2, 2013
I have raw data from a cyclic test that needs to be refined to generate a simple trend.
The raw data has about 1000 points to each complete cycle and im only interested in the maximum and minium values of the peaks. This would be easy but I am typically dealing with 15 cycles a second and in some instances up to 5,000,000 cycles in one test.
The amount of data is too large to be completed in one file but if done in parts I can then use a formula to reduce the number of max and min peaks chosen i.e. 1 in 100.
View 8 Replies
View Related
Oct 8, 2008
I have a set of data about with approx 7500 cells all contained in one column. The data has a series of peaks that happen, and I need to identify each peak value and place it in a cell. The peak does not occur at regular intervals but they are somewhat regular, as in within 130-230 data points. So, if one could find the first peak in the first 200 cells, identify it and store it somewhere, then look in the next 200, store it, etc. I don't know how to do that in excel.
View 4 Replies
View Related
Jun 13, 2013
I have two userforms with a label which displays CompetitorID. I want to transfer content (displayvalue) from UF1.label to UF2.Label. I know labels don't have a value property but want to simply know if it can be done as presently I'm getting run time error 380, can't set property value.
VB : HeadEntryForm.lbCompID = Me.lbCompID ' trf selected competitor ID to ID field on HeadEntryForm
View 3 Replies
View Related
Jan 14, 2009
I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer
Customer: ABCD
Customer PO: 12345
Part Number Quantity
AB 1
** 15
EF 22
GH 14
and I need it to output:
CUST: ABCD PART: AB
PO: 12345 QTY: 1
CUST: ABCD PART: **
PO: 12345 QTY: 15
CUST: ABCD PART: EF
PO: 12345 QTY: 22
CUST: ABCD PART: GH
PO: 12345 QTY: 14
View 4 Replies
View Related
Aug 17, 2012
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
View 4 Replies
View Related
May 13, 2014
I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?
Also example of my code is:
Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub
View 3 Replies
View Related
Feb 13, 2008
I'm working for a local authority who have been given a mass of survey data. In this particular task, residents of each small district within our area have been asked their levels of satisfaction with a service, and how important they think that service is. I want to plot these two values against each other using a scatterplot, and label each service.
Excel does not automatically allow this so I used a very good sheet from the forums here: Attach labels with names to the points in a scatter plot. It's the top file, and works well. However, I can't seem to customise it for my own data.
Problems include:
- Excel often freezing when I try to run it
- Not all the data being picked up for the chart
- Incorrect labels being picked up..........
View 4 Replies
View Related
Mar 21, 2014
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies
View Related
Jun 11, 2006
How can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500
1/3/2000 $600
3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
View 2 Replies
View Related
Apr 25, 2008
I need to send a file to hundreds of users so that I can tell who has a particular add-in installed. This file will then be saved to a particular directory. The problem I'm having is controlling the error that occurs when the add-in is NOT installed. The below approach (using On Error Goto) clearly isn't the way to go. I need something like
If(Iserror(AddIns("AmartaSpecs") Then Cells(2,3)="No"
The code I have so far is:
Sub Amarta_Specs()
Dim a
'ActiveSheet.Shapes("Button 1").Delete
Cells(1, 1) = "Username"
Cells(1, 2) = "Computer Name"
Cells(1, 3) = "Add-in installed?"
Cells(2, 1) = Environ("Username")
Cells(2, 2) = Environ("Computername")
On Error GoTo Error
Set a = AddIns("AmartaSpecs")
Cells(2, 3) = "Yes"
Error:
Cells(2, 3) = "No"
ChDir "E:FinanceSQL Add-in test"
ActiveWorkbook.SaveAs Filename:="E:FinanceSQL Add-in test" & Environ("Username") & ".xls"
End Sub
View 9 Replies
View Related
May 4, 2009
I am trying to create a code in the Worksheet_change event. I have hundreds of rows of data in a sheet. Each row of data is one unique project. What I am trying to do is figure out if any cell in a specific row has changed, and place a date at the end of that row idicating the date of the change.
View 9 Replies
View Related
May 23, 2007
How to detect msgbox pup up event.
Does any function like msgbox.activate=true or somrthing can used.
I want to avoid msgbox show up and close msgbox automaticly.
I know
application.displayalters=False
But it's seem not to apply to msgbox close.
View 9 Replies
View Related
Jan 26, 2007
I searched this site and found the code below to check if a worksheet to be updated is already open. It works fine (gets the desired message) if the workbook is open, but if not open I get "Run-time Error 9, Subscript out of range". I've played with it for a couple hours,
VB:
Dim wBook As Workbook
'Check that Summary worksheet is available for update.
Set wBook = Workbooks("CommittedSummary.xls")
If wBook Is Nothing Then 'Not open
'Do nothing
Else 'It is open
i = MsgBox("The 'CommittedSummary.xls' workbook is already in use and
cannot be updated. Please try again when the workbook Is available", _
vbCritical, "Committed Request Edit")
Goto EndUpdate
End If
View 5 Replies
View Related
Jun 19, 2007
I have a column with employee id's. Sometimes two or more employee ID's are double. I need to dedect if there are ID numbers that appears more then ones. If I found such a number I can copy that.
Has someone an idea or is there a build in function to handle this?
View 10 Replies
View Related
Jul 27, 2006
How can I detect on an excel workbook which cell have links(formula =) to
other workbooks without have to put my cursor on top of each linked cell.
I have had a hard time finding this cells. I can see the links by choosing Edit
then links, and excel will display list of links, but it does not specify
which cells contain those links
View 10 Replies
View Related
Feb 23, 2012
I am doing a bit of data spring cleaning... I need some VBA that will look at column FT for duplicates. I want it then to keep only the most recent one, so it would delete the others rows completely. Column B contains a date and time. When removing the items it should make a copy of them to the sheet Delete Log.
View 1 Replies
View Related
Jul 20, 2012
I have a workbook with a few worksheets. In sheet1 I have a few ranges which are linked to different parts in the other excel sheets.
Is there anyway to check if a range is being used as a link in another sheet.
Eg.
In sheet1 , A1 i have a value Apple.
In sheet2, A1 I have linked it to sheet1 A1.
is it possible to detect the link in sheet2 A1 from Sheet1 A1? I tried using Trace dependents but all it shows me is the link symbol? An arrow with a small excel sheet.
View 1 Replies
View Related
Dec 12, 2006
Is there anyway to detect if the user has just printed. I have code which transfer data from the sheet to an access file when the user prints using the button I placed on the sheet, unfortunately some users are using the print button on the toolbar.
View 9 Replies
View Related
May 27, 2007
Is there some way to detect that a key (specific or any) is being pressed when an Excel workbook is being opened to activate optional precessing in the macro code?
View 9 Replies
View Related
Apr 12, 2009
if i have data across multiple rows than is it possible to analyze that data in say row 1 and once row 1 ends move to row 2. example
Array Data
Colmn A B C D E
Row1: 3 1 4 6 8
Row2: 6 7 8 9 10
Row3: 4 5 1 2 8
Row4: 6 4 3 2 1
Row5: 2 4 1 2 2
OutPut Format
Colmn F
Row 1: Age is 3
Row 2: Always Same - Note this appears even though not part of data
Row 3: Year is 1
Row 4: Time is 4
Row 5: Hour is 6
Row 6: Minute is 8
Row 7: !
!Not Part of Output Comment: Now row 1 data has ended. Move to Row 2!
Row 8: Age is 6
Row 9: Always Same - Note this appears even though not part of data
Row 10: Year is 7
Row 11: Time is 8
Row 12: Hour is 9
Row 13: Minute is 10
!
etc
etc
etc
also note that the text that comes up in each row is not part of the data portion. Its just the number or string that gets pulled from the data portion.
View 9 Replies
View Related
