Ive been trying to find a way of inserting a picture into a defined merged cell. Once I insert the pic I would like it to auto size/fit into the merged cells.
I have only managed to do this by either resizing the pic's first, or running a retro macro to resize the image. Just wondering if there was an easier way?
I finally have the merged cells resizing the way I need, however it seems to lock the cell after the process not allowing it to be edited again until I unlock the sheet. below is the current code I am using
[Code] .....
I have imported and deleted several pictures into my worksheet. I want to re- name or re-order my pictures. Right now, a new pictures is name "picture 4" when there might only be two pictures in the sheet. I want to rename to say "picture 2" as I have a macro that calls for "picture 2" I know this should be simple, but I don't know how to do this.
View 4 Replies View RelatedI am using a staff schedule spreadsheet and have each column displaying text of where a staff person is assigned.
Instead of displaying the word "lunch" separately across several columns, is it possible to merge several columns and have the word "lunch" automatically stretched evenly across the several merged columns?
I dont want it to be centered but to literally be stretched to fit evenly across all of the merged cells.
I am trying to auto format some merged cells within a sheet based on the information in them. how to reference the information within theses cells?
View 5 Replies View RelatedLets say i type for now...
A1 = USA
B1 = Philippines
and then later
A1 = dog
B1 = cat
Is there a way that the width would automatically adjust even as I change the values of the given cells; meaning, if a word is long, the width will automatically adjust "longer", if a word is short, then it will automatically adjust "shorter".
I know how the "AutoFit Column Width" works but I don't want to press that every time my values change (words becoming shorter or longer).
adjust the following code so that my images are just a bit lower than "top aligned"? The code centers my images perfectly within the cells, but when you top align an image, it's just a hair too high and border formatting does not come out.
View 2 Replies View RelatedI have dates values in 3 columns.
A1 - Header - "Holidays in XXXX'
B1 - Header - "Holidays in YYYY'
C1 - Header - "Leaves by YOU"
A2:B11 have static dates consisting of 10 dates in each column.
C2:C11 - the user may enter any date at any point of time.
I would like to auto-merge the dates in all the 3 columns (A2:C11) in a single column say D2:D31 and then the system should auto-sort the column based on dates in any one order. So as soon as the user enters a value in say cell C2, all the 10+10+1 dates should get sorted.
Also the constraint here is a user may not apply all 10 leaves at in a year. So many of the cells may have blank values.
I send these kind of mails to intimate people about upcoming meeting, the format I prepare in Excel 2013 and paste it in Outlook 2013 (as a table, not as an image)
Now one of the columns I put as 'Days Remaining' which basically tells the users how many days are there to the review, the image below will show how it looks:
Now the numbers of days remaining will be correct the day I send the mail, but when somebody opens the mail at a later date, it would not sort of show the true number.
Is there a way to auto-update this number inside the Outlook mail, as it works in an Excel Sheet?
how to stop rows resizing with text which paste into cells
View 1 Replies View RelatedI imported a picture and changed the properties thus:
Lock aspect ratio is set.
Move and size with cells is set.
If I resize the picture itself, the aspect ratio is maintained - good. However, if I make the column narrower, the pictures width changes, the height remains the same and it acquires a new locked aspect ratio - bad.
I have an workbook with pictures that are linked to external picture files, and they are placed in the workbook via macro. When I email the file to another computer and open it, the pics do not display and show an error:
The linked image cannot be displayed. The file may have been moved, renamed, or deleted, Verify that the link points to the correct file and location.
I would like to be able to save the workbook with the pictures in them (without having to archive them) so that I can open it and see them on another machine.
I have a small table with pictures in column C. I want to e able to sort the table by column B and have the pictures in the cells in column C sort with their corresponding data. How do I do that? Right now, the table sorts but the pictures don't move.
View 3 Replies View RelatedI wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I'm trying to wrap my head around this. I have in a formula in one sheet pointing to a cell in another. Once I insert a row the formula adjusts. I need them to remain static.
I have tried searching, however I'm not 100% on the terminology.I have tried the F4 shortcut and put the $ signs in, however they still change.
I need a macro that can search text cells in column L for a space delimiter, then if the space is present, to split that cell into a row inserted below it, then copy the information in the rest of the row down. I'm not really up on my VBA.
Here is the original table:
This is with a filter on:
You can see there that some inserted object (in this case, PDF files shown as icons), are moved. I need to find a way to immobilize every inserted object within each cell boundaries. I want to freely sort or filter and avoid this kind of problem that gets worse with more rows, columns and inserted objects.
How do I insert pictures into Excel's cells, so as to get a mosaic of say 2x3 pics?
Trying to just drag a pic onto a cell does not make the pic sticks. I need the pics to behave like in frames in HTML, including moving, resizing etc. Same for video clips that I want running within the cells.
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
View 14 Replies View RelatedI have a spradsheet that I've formatted using merged cells. The spreadsheet has several columns. Into these columns I must enter raw data extracted from our SAP data base. The extraction worksheet has no merged cells. So bottom line, I have a column of say, 30 non-merged cells and I want to paste that column into my formatted spreadsheet that has 30 merged cells of thre cells a piece (90 cells total).
So far I have been unable to do this. If I've attached it correctly, the sample attached
MERGE EXAMPLE.xls‎
Im having problems trying to sort through data and linking certain data. I will post example below:
Main 1
Main 2
Main
3
Sublevel 1-4
[Code]....
This is just one part of a row of the workbook but shows the Main data which is made up of 4 different sub levels on the right. I merged 4 cells for the main data so that all the cells lined up but I'm still having problems with being able to sort and link the files together so that when I filter, they all do it together. The example didn't paste well.
I am using Excel 2010 and have the problem as shown in the attached file.
Input Sheet shows the Data I have at present
Output Sheet is the desired result.
I need a macro which should create an "Output" sheet by doing the following on the Input Sheet
1)Insert a Blank Column before Column A
2)Unmerge the Region Heading and insert the respective Region Name in the newly inserted Column. Region Heading will be in Bold Font.
3)Repeat Step 2 for all Regions
4)Delete the Rows which was merged.
Please note that the number of Data Rows will vary for each Region.
I have shown two Regions for explanation purpose only. There will be several Regions in reality.
The result is shown on the Output sheet
Merge Problem - Forum.xlsx‎
Range("B25").Name = "EndMull"
Its fine but if i insert a new row or column then it mucks the whole thing up. Is there away of naming them but if any cells, row or columns are inserted the range will automatically adjust to suit1
i have a problem to sort merged cells in the file attached. i tried via macro but could not reached a good solution. I have 30 plans inside the sheet and even manually is too hard to do it because i use some "=" to not type again every number since some are the same but when i try to sort the lines became diferent values.
View 10 Replies View RelatedI now see why alot of you dont like merged cell's. What i am trying to do is Cut and paste a range that contains merged cells. A kit can be created using the Button on the sheet. The cells in column G are merged down to the last kit item. On Row A of the kit the 1st cell contains data validation once the Delete kit cell is re-entered it removes the selected kit from the sheet. Then will select all kits below the (now deleated one) and cut the range, and paste it to where the old kit was located.
When the kit's are pasted into the new location there are issues with the merged cells in column G. Is there a way to fix this issue, or know of another approach to keeping the same layout.
I have merged cell C2:C9. When I insert formula =C5, it returns 0. How do I make it to return the actual value?
View 11 Replies View RelatedI have exported a report to Excel from a BI tool called ZAP.
Unfortunately the cells in the columns are merged by group eg. salesperson, product, country.
I need to be able to filter by each of the columns - the only way i can think of is to unmerge and copy the information to the rest of the "merge area".
This will be extremely time consuming as there are more than 1000 rows and at least 5 columns that I want to filter.
Sales PersonCountryCustomer NameProduct Model DetailJohn WUNITED KINGDOMAPCBasicPremiumStandardStAPLAccessoriesAcrylic FsPremiumFsStStyAPOAccessoriesPremiumStandardStAPMFsPremiumStandardSt
I have a spreadsheet that has merged cells on that is typed into.
I have a Macro that pulls the information into another sheet and then it tries to clear the cells for the next person to fill in. The issue I am having is that i cant clear the merged cell. I have tried the following code
Code:
Sheets("Coach").Select
Cells(18, 2) = ""
Range(Cells(18, 2), Cells(26, 11)).ClearContents
Sheets("Coach").Cells(18, 2).ClearContents
I have a table where sometimes cells are merged. To the right they are not merged, but I need to link to the value of the merged cell. How can I do it if I don't want to do it manually?
Example:
Say A1:A4 is merged, A5 is just normal. I want a formula using those values, say in B1:B5. Now just filling down the formula would reference A1, A2 and so forth. This is wrong.
when i try to link a merged cell to retrieve result, i get cell ref for both cells, i only like to see B7 not B7:E7.
Summary C708 Spreadsheet FormulasCellFormulaC7='Abode Homewares Pty Ltd'!B7:E7 Excel tables to the web >> Excel Jeanie HTML 4