I would like to automate with code the process of extracting one worksheet from that workbook, and saving it as a separate workbook, with a file name equal to the text value of a cell (date formatted dd-mm-yy) from within that workbook. (ie d1="10/07/08" save file with one worksheet 10-07-08.xls)
I close an existing excel file I need to automatically save it to another folder as the same name. I don't want any prompts or save as boxes to appear when this happens.
I need to do this as I use the file all the time, but need to save it on to a network where others can view it.
Is It Possible To Auto Save To A File Via A Macro?
What I Want To Do Is To Auto Save Directly To A Folder On Our System Via A Macro.
The Problem Is That Firstly It Will Need To Look Up A Cell ( D8 ) To Find Out The Job Number
Then It Will Have To Find The Folder On Our System ( Its On Desktop Under Job File Folder ) Then Comes The Hard Bit It Will Need To Locate That Job Number ( Cell D8 ) To Look Up The Relevant Folder To Put It In. All The Job Files Are Labelled Up Eg.( J2663 - Parry ) Then In That Folder Is A Sub Folder Called Docs Which It Needs To Be Saved In
I have three cells checked to make sure data is in them and then the code is meant to save the file with some of the data from those three cells. The checks work but now the save part doesn't! If I comment out two of the checks the save does work.
Linked to http://www.excelforum.com/excel-programming/625320-auto-save-a-new-file-with-data-from-3-cells.html
I have workbook I would like to auto save to PDF copy file in different location every time the original file is save maybe some VGA code is this possible ???
I have a workbook, "A", that while open I need to be able to detect any type of activity within other open Excel workbooks "B...Z" that are simultaneously open.
I understand that I would need to use the Class Module with a Public WithEvents function but I am stuck here.
I have a workbook that retrieves data from a file from a URL address upon opening. Actually, I am saving the URL file to a local drive and then updating my workbook with this data. The problem is that the job that updates the URL file sometimes fails. I want to notify the user of my workbook that the data has not been update recently. I am trying to use the built in document properties (Last Save Time) but I cannot get it to work except for the workbook that has the macros in it. Is there a way to find the last save time of a workbook (from a URL address) seperate from the workbook that has the marco? Below is my current code that errors out at:
dp = Application.Workbooks("DockReportExport.xls").BuiltinDocumentProperties("Last Save Time") with and runtime error.
Sub FTP() Application.DisplayAlerts = False Application.ScreenUpdating = False 'Open file from URL addres to check last save time Workbooks.Open Filename:="http://172.16.1.94/Files/Operations/...portExport.xls" 'Check if data on server has been updated in the last 15 minutes
I have a file that sits open all the time, and performs some refresh functions every thirty minutes. I need the file to save a copy of the tab as a CSV file at a given time interval. The code below is almost there, just need to work with the time interval part. The way it should work is to open the csv, copy / paste the active sheet; then close the csv; leaving the original excel file open. I can run it, and it works, but the time interval is not triggering.
I can get the time interval to work by itself, and the save csv part to work by itself also; I need them to work together.
VB: Sub test() Application.OnTime Now + TimeSerial(0, 1, 0), "test" Dim OutputFile As Workbook, InputFile As Workbook Dim sDD As Worksheet
I have a Workbook that already has a macro in it that will generate multiple sheets based on certain criteria.
For each of these newly generated sheets (numbered 1-6 in the attached example), I need to be able save each of them to a PDF file based on a unique name contained in a certain cell (in this case, each named is referenced in cell Q1 of each sheet). As such, I should end up with 6 pdfs based on the attached sample files.
The PDFs would ideally need to be landscaped and should be just 1 page per sheet.
In my attached sample workbook, you'll notice that I have a "PracticePrint" macro that doesn't quite get the job done. One other criteria involves not printing any sheet with the characters "1010" in it (my PracticePrint macro is setup to do that, but it fails to do much else).
Excel takes about 10 minutes in the saving process. When I say 10 minutes, I mean, the excel screen freezes (says not responding) for about 10 minutes, then it actually saves at the very end in the normal time any other file would take as you watch the progress bar go forward.
I know many of the common answers and have tried. reducing the calculation time (which in turn reduces the saving time).
But in my circumstance, the calculation takes a very reasonable amount of time, and you see the progress % going forward.
- I would say I have about 2000 rows, and 15 columns. - They have sumifs formulas. - They link to a different workbook. - The workbook I am working on saves to the network - the source of my sumifs are also in the same folder on the network - the recalculation takes about 10 seconds at most - i have turned off recalculate before saving, it is all on manual calcs
- when i hit save, there are no calcs being performed - there are no macros in the workbook - there are only about 2 names in the name manager - then it freezes for about 10 minutes. - then the progress bar starts moving then it saves.
What is it doing in those 10 minutes?
1 more item to note, when I break the links to the workbook and thereby removing the sumifs formulas, its a snap.
Why does the existence of the sumifs extend saving time? I would completely understand if it elongated calculation time, but if calculation is off, then why does it even worry about it when saving?
i always receive 200 mb file. which i has, around 10 sheets , with pivot tables and formulas.
i have to open this file update refresh and save as this file, which i am doing via vba.
however the challenge for me here is though i set xl calculation to manual at the begining and xl calculation to automatic at the end. Though i used this code, its taking close to 5 mins to complete this via Vba.
I have a delivery time programm (clients to be delivered the next day) which I would like to run every night at a specific time. Is there any MS tool to trigger the Excel file? Or do we have to use the "old" batch file ( if yes, pls send example)?
I have a large Excel 2007 file, around 60.000KB. 54.000KB are due to one of the worksheets where I have 8760rows x 160columns with data. The calculation time is not a problem, it is very fast, it only takes 2/3 seconds. The problem is when I open or save the file, it takes around 2 minutes... it is not too much, but it becomes too long when one has to open and save it several times. It there any trick to decrease the time when openning or saving an excel file??
I currently use the following code to create a duplicate file based on two cells within a directory and folder i specify. These cells consist of the team and week commencing date (mondays date of week which is cell 'Main Menu'!K8)
I am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
VBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
am using Excel 2010 and having issues trying to save a worksheet to a specified file location with the save date....
I have tried several posts form this forum and elsewhere and can't seem to get the macro to do what I want.....
I want to save a 'worksheet' from an open workbook that I use for updating information to the same file path as the workbook with the date the file saved...
What I am trying to do is that I have an excel file with macros and it is a read-only file. In order for the user to save, I want them to only be able to save as a .xlsx file as it disables all macros. If for whatever reason, the user wants to save the file as another .xlsm file, they should be allowed but before they save, a "are you sure you want to save as .xlsm?" message should pop up.
All the options in the save as box should still be available in case they want to save in that particular format. Just that the .xlsx should be the default.
I have a macro that copy one sheet of the Active workbook and sends it via email.
I need to add a code in this sheet so when one opens it from the email, with a command button to be able to save the file to specific, fixed folder on the local network with it’s original file name.
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez() Dim IE As Object Set IE = CreateObject("InternetExplorer.Application") IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com IE.Visible = True While IE.Busy DoEvents Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()" 'this is the name of the download link as from when i hover my pointer over download link. End Sub
I have a spreadsheet where I want to require certain fields to be completed then I want to have that file auto emailed. I have learned that I do need to have the file saved before sending otherwise the data will not appear in the email, so with this I want to have the file temporarily saved emailed then the temp file deleted.
Here is the code I have so far but it errors on the blue text, I did change the TempFileName from = "Copy of " & wb1.Name & " " & Format(Now, "dd-mmm-yy h-mm-ss") to = [C16] & "_" & [B6] & "_" & [D6]
Private Sub CommandButton1_Click() If Range("B6").Value = "" Or _ Range("d6").Value = "" Or _ Range("f6").Value = "" Or _ Range("E9").Value = "" Or _
A co-worker of mine is exporting files from Quickpen as excel files, but every time he names the files with any Uppercase letters in the files name, they are automatically changing to all lower case. Even when he tries to rename the files, they will not stay with any uppercase letters....I have searched all over and cannot find a solution. If he sends ME the file, I can open it in excel and save it with any cases.
