attached files.
1. I want to link my sales detail worksheet to summary worksheet. When i insert an amount of 500 in "Sales details" worksheet on certain date then the amount will appear 500 and falls under the respective week and customer name also.
2. When there is two or three delivery order at the same week, the amount that i type in sales details also will auto sum up and reflect in the "Summary" worksheet.
I have created a comparison sheet and compares my old one from last week to the new one I create for this week.
It populates cells with the differences and shows me the data from the new sheet. But since my they are so massive A5:AZ20,000 I want to create an auto summary or something.
Column A has each properties Unique Identifier And the rest is various info for the property. I would like it to return my unique ID and then the columns with new data that has showed up from the comparison some are text and some are numbers.
Also I am using Excel 2010.
I am starting within a workbook with a standard invoice/form. During the course of a month this invoice will be copied 20 to 30 times within the workbook and the amounts changed each time. Is there a way that I can:
a) Have amounts from 2 of the cells (say E30 and E31) within each new invoice worksheet automatically included on a summary page? These cells are calculated by formula.
b) (This one would be nice but is not essential) Have each new invoice worksheet that is added (by copying) automatically numbered sequentially in a cell (say A2) and also re-named with this number. The first existing invoice would be manually numbered and each additional invoice would follow from there.
I browsed through existing threads and other sites and didn't find this exact scenario. I'm sorry if this type of question is common, but I wouldn't know. I appreciate any help and thanks for trying and offering your 2 cents!
OK. What I have is a table with over 20 columns that I use to sort and AutoFilter the 200+ rows of data. Several of the columns use Data Validation which require data to be from lists. Conditional formatting is used very often throughout the sheet.
Now, I want to have a second worksheet that will be almost identical to the original, but only accept rows that have certain values (let's say 3 of the 8 possible values) a specific column. These values are text values that appear in a list, and the column uses Data Validation to accept values only from that list. This second worksheet should be like if I Autofiltered the original table by check-marking 3 of the 8 available filter options for that column, but I need this specific 'view' of the data for certain purposes and my own reference.
In a perfect world, this second sheet would automatically mirror the original sheet's changes... But I don't know if that's possible? Although Excel is a very flexible and powerful tool, flexibility is relative once your tastes in data organization become more and more specific! Please let me know if any of this is impossible, so I'll stop trying to figure out how, haha.
Even if it won't 'automatically' mirror the original, I still would like to view the information in this way!
Also, I am very good with formulas and finding my way around Excel's features, but I'm not very experienced with the VBA programming or custom macro-writing.
Is there a way to populate a summary worksheet with the details of 4 other
worksheets, all of which have the same number of columns (A:J with the labels
on row 5) yet have different numbers of rows (each sheet will have a
different number of rows with the data beginning on row 6 in each sheet).
Is it possible to do without running a macro so that the summary sheet will
look to be automatically populated with as many rows as there are on sheet
number 1, then look to be populated with as many rows as there are on sheet
number 2, etc.
Is it possible to automatically populate a summary worksheet, based on matches in other worksheets within the workbook which match a particular date?
I have a workbook with 15 worksheets--each sheet is setup like a database with 4 columns (fields). One column is for the date.
I would like to populate a summary sheet that serves as an executive summary of all "records" which match a particular date.
I have several tabs (worksheets) representing purchases for a specific year.
There is one tab (worksheet) that is a Summary of all purchases for all
years. How do I get Excel to automatically update the Summary worksheet
anytime one of the other worksheets are modified?
Im currently working on making a workbook as a summary/join of several workbooks. All cells are formatted in the same way, and only Row 1 is the same in all workbooks.
How to combine several excel files into one file?
My issue is that when i run this macro, the rows are overwritten for every workbook runned through.
I end up with only the contents of the last copied workbook.
I guess my EndRow is wrong, or the copy function, since the offset is not set properly.
Code:
Sub ExtractData()Dim basebook As Workbook
Dim mybook As Workbook
Dim FNames As String
Dim MyPath As String
Dim SaveDriveDir As String
Dim Cnum As Integer
[code].....
I'm trying to do is a unique list or summary of a worksheet. First there are 4 columns that need to be read, then from this list a new list must be created using advanced filter with unique value. Then the first 4 columns must be deleted and replaced with the new 4 columns, in the third summary the totals for Gender 1-3 are aded together depending by the quality and the same for gender 4-5. I'm attaching a sample file to show how the summary is supposed to look when is finished. I need to do this in code because the rows may vary depending on the brands, genders and qualities. I deleted some info to reduce the file size
View 2 Replies View RelatedI have a summary worksheet for data contained within 50 worksheets that follow it. The summary page has 50 rows corresponding to the 50 worksheets. The rows count the number of entries there are in each column in its corresponding worksheet. Because of the large amount of data ( dates, prices, names) that gets added to the worksheets, it is difficult to find the latest changes.
Ideally, if data within the worksheets were added in the last three days, I would like to see the cells on the summary worksheet that changed to be highlighted. Alternatively, I could add a column in the summary worksheet which would show the date of the most recent change in the cell that corresponds to its worksheet.
I tried working with excel formulas but could not find an ideal solution. A problem I ran into was that the dates do not sit in a consecutive range, i.e. columns B,E,F,J, and H contains the dates. The other have numbers, prices. So looking for a Max number is troublesome becasue of the long formula I would have to create for each row.
Does any one have a VBA solution?
I need the correct syntax to consolidate ranges from several worksheets into a summary worksheet - all in the same workbook. I am building the Array on the fly, and I keep getting errors. (Subscript out of range being the most recent).
The code now is opening only one workbook so I can keep it simple. It iterates through the sheets collection, and builds the array.
Private Sub cbConsolidateToRollups_Click()
Dim MyArray() As Variant
Dim Source As Variant
Dim SheetNames As Variant
Dim SingleQuote, DoubleQuote
SingleQuote = Chr(39)
DoubleQuote = Chr(34)
'set the directory to Rollups
ToPath = Application.DefaultFilePath & "Cost Tracking" & "Rollups"
ChDir ToPath ....................
I have 12 Workbooks (each for every month) name Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec
These workbooks contains something like the following
Name
Days of Vacation
Something Else#1
Something else#2
Something else #3
[Code] .....
I want something to loop through the months and copy all rows for mary in a summary sheets and sum the Days of Vacation from Column B.
Note that The first Workbook has some data, the 2nd Workbook is the Jan and the 13 Workbook is the Dec, the 14t is the Summary Workbook
VB:
Sub SearchForString()
Application.Calculation = xlCalculationManual
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
LCopyToRow = 2
[Code] .....
I have 8 Sheets in my worksheet with orders from my customers. Column C is their PO# and Column M is the Status of the order. What im looking to do is set up a summary sheet with the List of 8 customers that tells me what PO#'s are in a particular status.
I need a formula to list all PO's that are in "Fabricating" or "Completed" Statuses.
I have gotten this far:
=if(Sheet1!M25="Fabricating",Sheet1!C25,if(Sheet1!M25="Completed",Sheet1!C25,"None"
which works perfectly for the individual rows, but i need it to do it for all rows (1-2500). If i do Sheet1!M2:M2500, i loose it.
I have a workbook that has 31 sheets representing the days in a month. Each sheet is identical to each other. The naming convention for each sheet is as follows...(1,2,3,...31). The very last sheet is named "Summary". On this sheet I have in column A the dates from the beginning of the month dragged down to the last day of the month in this format xx/xx/xx. To the right I have it equal to a particular cell (M33) corresponding to the date. So for 04/01/2012, the value in the cell to the right is (='1'!M33). Instead of repeating the process of "=" the click the next tab and get M33 on that tab....is there a faster way of doing this where I can enter a formula and drag it down pulling all the "M33" from each sheet?
View 6 Replies View RelatedI am attempting to write code for a macro that can cycle through about 30 excel workbooks and merge the data. getting the raw data on one sheet is not a problem, but I also need to sort similar data into corresponding columns while merging such that all data from the workbooks with a certain column heading will be in a single column with a single heading on the summary sheet. The problem is that the column headings on the source workbooks are not always standardized, i.e. "F high", "high F". Each sheet has several columns that look like the one below, with a header at the top and a series of numbers. (please ignore the dashes, I just used them to line up the columns in this post, in excel each value is in a different cell)
F Low---F High---V Low
721-----999---804
721-----999---0
721-----999---0
711-----720---786
711-----720---713
My vba skills are very basic, so I have been approaching this problem with a mountain of if..else and InStr commands, which doesn't seem like the best method and isn't working.
I am trying to find the total rows in multiple worksheets and to copy the row count to a summary sheet.
For Each ws In Workbooks("HR.xls").Worksheets
With ws
If ws.Name "Summary" Then
If ws.Name "Pivot" Then
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies View RelatedThe new worksheet is created to the left of the existing source worksheet.
View 2 Replies View RelatedI am copying data from worksheet "Microsoft" to another workbook and paste in sheet1, i want the cell G1 to auto input the worksheet name "Microsoft" where i copy the data from,
How to have G1 show the worksheet name after i copy and paste the data from worksheet name "Microsoft".
excel 2010. This workbook has 4 worksheet(Process Engineer,OSBL,OSA,Lab Operator) I want to know what is the best excel formula/function to summary this 4 worksheet.
Example:I want a formula/function to summary all the statement from 4 worksheets and total number of answer "1" per statement from 4 worksheet.
Sample Statement below
"Demonstrate Interpersonal (People-to-People-) Skills" Question:What is the formula if above statement contains this statement in 4 worksheet?As i checked the total is 4 then What is the formula to get all total answered ICC on this statement from 4 worksheet?
I have a summary sheet with a numerous data sheets to the left of it in a single workbook. Every time I add a new data sheet I have to type it's name on the summary sheet. How can I automate this?
View 9 Replies View RelatedHow can I create a formula that will reflect a % value within that range?
(Example)
Input cell = 129 this value can be changed between 0 and 800
A1 = 0
A2 = 800
(Range) 0 to 800 = 100%
What would the percent value equal?
I have a master worksheet with due dates for various forms to be completed. These forms are on separate worksheets within the workbook.
I'd like to highlight the master date entry in red if the form hasn't been completed by the due date, but also highlight in green when it has been done.
I've seen it done, and had the formula on a couple documents, but had a loss of data. What I'm looking for is the formula to enter into a cell for copying the name of the worksheet into that cell.
View 6 Replies View RelatedI am trying to sum the details from sheet2 in sheet3. I am currently using a plain formula to sum-up the values. However, create a indirect and vlookup function to sum the values.
In sheet3, I have to sum the values from sheet2 based on the contacts. Sheet1, sheet2 and Sheet3 are connected and any update(insert,delete.. etc) will be made in sheet 1 only. Sheet2 automatically updates based on sheet1. Similarly, Sheet3 should also update based on sheet1 and sum the values based on contacts from sheet2.
I have added the formula which I am currently using in the sheet.
My goal is to have changes done to one sheet reflect on to another to make things much more easy to do. Below is a picture of what I am dealing with. ( I covered some personal information)
pic of excel.jpg I want to be able to plug in something or delete it and have it reflect to all other sheets. Also I would like to be able to plug in some information and have it export itself based on a specific information. For example, I would want all Newark,NJ contacts to be place in the Newark list automatically.
I have a spreadsheet that references another spreadsheet, however the other spreadsheet will get updated from time to time. When it's updated the file name changes to reflect the revision:
"C:Projects9-022_Tunisia1_Design9-022-R00-Inst_Database.xls"
When this file is revised the "...R001..." will increment with each revision but the rest of the file will stay the same.
Sometimes I have to reference a file in another directory:
"C:Projects9-030_Brazil1 Design9-030-R00-Inst_Database.xls"
I was planning on placing information in the following cells of this spreadsheet ("C:Projects9-022_Tunisia1_Design9-022-R001-Cause_&_Effects.xls):
Cell A1 - Project Number (i.e. 09-022, or 09-030)
Cell A2 - Project Name (i.e. Tunisia, or Brazil)
Cell A3 - File Rev Number (i.e. 1, 2, 3, etc.)
I was thinking my "INDIRECT.EXE" would look something like this:
=INDIRECT.EXE("'C:Projects"&A1&"1_Design["&A1&"_"&A2&"-R00"&A3&"-Cause_&_Effects.XLS]Index'!Q5")
The value on the spreadsheet tab "Index" that I'm referencing in cell Q5, is "FG-5901" but all I'm getting in the spreadsheet were this formula resides, is an error "#NAME?"
Part of my problem is that I don't fully understand the function of the "&" symbol in the formula. Sometimes I've seen it placed on both sides of a cell reference (i.e. &A1&), and other time only at the being (i.e. &A1).
I have two different Google Sheets Workbooks;
I need that for ie: changes made on C3 of Workbook 1, reflect on E23 of Workbook 2.
I am needing to reflect some of my work in a waterfall chart, but do not have that as an option in my list of charts. Is there a down load I can get?
View 2 Replies View RelatedI've compiled data into a spreadsheet which indicates the number of homes sold over the course of 3 years (from 1/1/05 to now) along with their price per square foot, sale price, year built, bed/bath count, and other pertinent factors regarding each property.
I've extrapolated graphs from these in the past which indicated the trends in each category over time (i.e.: Average quarterly price per square foot over time, and so forth).
The data range I'm working with now, however, is from an area of my region so small, that the number of units sold over the past few years is sporadic. Whereas it's normally 100 to 1000 units that comprise my data, now it's only 15 units.
This has created gaps in my line graphs where the price per square foot will dramatically drop down to zero over the periods in time where no sale was recorded. So the line graph ends up looking like a zig-zaggy range of peaks reflecting the price per square foot of a sale, and valleys representing "$0.00" for periods of time where nothing has sold.
To have a Price per square foot of $0.00 is incorrect since in reality nothing was sold.
I would like to be able to eliminate the portions of the graph that have the "$0.00" so that the line graph can "jump" from one sale to the next when the quarterly data indicates 0 units sold.
I'd like to do this without having to eliminate those areas in my spreadsheets. Is there any "catch-all" tool that might do this or is that just crazy talk?