I browsed through existing threads and other sites and didn't find this exact scenario. I'm sorry if this type of question is common, but I wouldn't know. I appreciate any help and thanks for trying and offering your 2 cents!
OK. What I have is a table with over 20 columns that I use to sort and AutoFilter the 200+ rows of data. Several of the columns use Data Validation which require data to be from lists. Conditional formatting is used very often throughout the sheet.
Now, I want to have a second worksheet that will be almost identical to the original, but only accept rows that have certain values (let's say 3 of the 8 possible values) a specific column. These values are text values that appear in a list, and the column uses Data Validation to accept values only from that list. This second worksheet should be like if I Autofiltered the original table by check-marking 3 of the 8 available filter options for that column, but I need this specific 'view' of the data for certain purposes and my own reference.
In a perfect world, this second sheet would automatically mirror the original sheet's changes... But I don't know if that's possible? Although Excel is a very flexible and powerful tool, flexibility is relative once your tastes in data organization become more and more specific! Please let me know if any of this is impossible, so I'll stop trying to figure out how, haha.
Even if it won't 'automatically' mirror the original, I still would like to view the information in this way!
Also, I am very good with formulas and finding my way around Excel's features, but I'm not very experienced with the VBA programming or custom macro-writing.
I am starting within a workbook with a standard invoice/form. During the course of a month this invoice will be copied 20 to 30 times within the workbook and the amounts changed each time. Is there a way that I can:
a) Have amounts from 2 of the cells (say E30 and E31) within each new invoice worksheet automatically included on a summary page? These cells are calculated by formula.
b) (This one would be nice but is not essential) Have each new invoice worksheet that is added (by copying) automatically numbered sequentially in a cell (say A2) and also re-named with this number. The first existing invoice would be manually numbered and each additional invoice would follow from there.
i've attached a file of what i'm working with. only the Data Entry worksheet and Data View worksheet are what i am concerned with
i'm building this billing workbook based on a monthly calendar. i want to have the summary column be a SUM of only the months billed thus far. for example, if the current month is november and i'm entering in billing information for the month of october, how would i be able to show a SUM of only months already billed? in other words, how can i summarize july:september, then see that summary in a column, and then bill october without seeing the effect on the summary column.
currently, the summary column is a summary of all months. i need it to be relative to the Current Date entered in the Data Entry Worksheet.
Is there a way to populate a summary worksheet with the details of 4 other worksheets, all of which have the same number of columns (A:J with the labels on row 5) yet have different numbers of rows (each sheet will have a different number of rows with the data beginning on row 6 in each sheet).
Is it possible to do without running a macro so that the summary sheet will look to be automatically populated with as many rows as there are on sheet number 1, then look to be populated with as many rows as there are on sheet number 2, etc.
I have several tabs (worksheets) representing purchases for a specific year. There is one tab (worksheet) that is a Summary of all purchases for all years. How do I get Excel to automatically update the Summary worksheet anytime one of the other worksheets are modified?
Im currently working on making a workbook as a summary/join of several workbooks. All cells are formatted in the same way, and only Row 1 is the same in all workbooks.
How to combine several excel files into one file?
My issue is that when i run this macro, the rows are overwritten for every workbook runned through.
I end up with only the contents of the last copied workbook.
I guess my EndRow is wrong, or the copy function, since the offset is not set properly.
Code: Sub ExtractData()Dim basebook As Workbook Dim mybook As Workbook Dim FNames As String Dim MyPath As String Dim SaveDriveDir As String Dim Cnum As Integer
I'm trying to do is a unique list or summary of a worksheet. First there are 4 columns that need to be read, then from this list a new list must be created using advanced filter with unique value. Then the first 4 columns must be deleted and replaced with the new 4 columns, in the third summary the totals for Gender 1-3 are aded together depending by the quality and the same for gender 4-5. I'm attaching a sample file to show how the summary is supposed to look when is finished. I need to do this in code because the rows may vary depending on the brands, genders and qualities. I deleted some info to reduce the file size
I have a summary worksheet for data contained within 50 worksheets that follow it. The summary page has 50 rows corresponding to the 50 worksheets. The rows count the number of entries there are in each column in its corresponding worksheet. Because of the large amount of data ( dates, prices, names) that gets added to the worksheets, it is difficult to find the latest changes.
Ideally, if data within the worksheets were added in the last three days, I would like to see the cells on the summary worksheet that changed to be highlighted. Alternatively, I could add a column in the summary worksheet which would show the date of the most recent change in the cell that corresponds to its worksheet.
I tried working with excel formulas but could not find an ideal solution. A problem I ran into was that the dates do not sit in a consecutive range, i.e. columns B,E,F,J, and H contains the dates. The other have numbers, prices. So looking for a Max number is troublesome becasue of the long formula I would have to create for each row.
I need the correct syntax to consolidate ranges from several worksheets into a summary worksheet - all in the same workbook. I am building the Array on the fly, and I keep getting errors. (Subscript out of range being the most recent).
The code now is opening only one workbook so I can keep it simple. It iterates through the sheets collection, and builds the array.
Private Sub cbConsolidateToRollups_Click() Dim MyArray() As Variant Dim Source As Variant Dim SheetNames As Variant Dim SingleQuote, DoubleQuote SingleQuote = Chr(39) DoubleQuote = Chr(34) 'set the directory to Rollups ToPath = Application.DefaultFilePath & "Cost Tracking" & "Rollups" ChDir ToPath ....................
I have 8 Sheets in my worksheet with orders from my customers. Column C is their PO# and Column M is the Status of the order. What im looking to do is set up a summary sheet with the List of 8 customers that tells me what PO#'s are in a particular status. I need a formula to list all PO's that are in "Fabricating" or "Completed" Statuses.
I have gotten this far: =if(Sheet1!M25="Fabricating",Sheet1!C25,if(Sheet1!M25="Completed",Sheet1!C25,"None" which works perfectly for the individual rows, but i need it to do it for all rows (1-2500). If i do Sheet1!M2:M2500, i loose it.
I have a workbook that has 31 sheets representing the days in a month. Each sheet is identical to each other. The naming convention for each sheet is as follows...(1,2,3,...31). The very last sheet is named "Summary". On this sheet I have in column A the dates from the beginning of the month dragged down to the last day of the month in this format xx/xx/xx. To the right I have it equal to a particular cell (M33) corresponding to the date. So for 04/01/2012, the value in the cell to the right is (='1'!M33). Instead of repeating the process of "=" the click the next tab and get M33 on that tab....is there a faster way of doing this where I can enter a formula and drag it down pulling all the "M33" from each sheet?
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code: Sub Results2() ' Results2 Macro ' copy table filter power by greater than and less than Sheets("Finalizing Results 2").Select Cells.Select
I am attempting to write code for a macro that can cycle through about 30 excel workbooks and merge the data. getting the raw data on one sheet is not a problem, but I also need to sort similar data into corresponding columns while merging such that all data from the workbooks with a certain column heading will be in a single column with a single heading on the summary sheet. The problem is that the column headings on the source workbooks are not always standardized, i.e. "F high", "high F". Each sheet has several columns that look like the one below, with a header at the top and a series of numbers. (please ignore the dashes, I just used them to line up the columns in this post, in excel each value is in a different cell)
F Low---F High---V Low 721-----999---804 721-----999---0 721-----999---0 711-----720---786 711-----720---713
My vba skills are very basic, so I have been approaching this problem with a mountain of if..else and InStr commands, which doesn't seem like the best method and isn't working.
excel 2010. This workbook has 4 worksheet(Process Engineer,OSBL,OSA,Lab Operator) I want to know what is the best excel formula/function to summary this 4 worksheet.
Example:I want a formula/function to summary all the statement from 4 worksheets and total number of answer "1" per statement from 4 worksheet.
Sample Statement below
"Demonstrate Interpersonal (People-to-People-) Skills" Question:What is the formula if above statement contains this statement in 4 worksheet?As i checked the total is 4 then What is the formula to get all total answered ICC on this statement from 4 worksheet?
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
1. I want to link my sales detail worksheet to summary worksheet. When i insert an amount of 500 in "Sales details" worksheet on certain date then the amount will appear 500 and falls under the respective week and customer name also.
2. When there is two or three delivery order at the same week, the amount that i type in sales details also will auto sum up and reflect in the "Summary" worksheet.
I have in sheet1 a column "A" with random dates in this format x/x/200X.This sheet is constantly updated with new random entries as more information arrives.
So, how can I use a formula to automatically move to sheet2 "only" the rows with dates for JANUARY. I know that I can move data using e.g....=sheet1!A1, but I don't know how to use this formula with an specific condition to move the rows with JANUARY dates only.
In the attachment, you can see how I would like to move "only" the rows with JANUARY dates to sheet2.
I have a spreadsheet which is an extract from another application's DB, and it's just ugly in Excel. No nice neat columns etc. Data from some tables of the other application were just dumped into cells. Some of the data I need is scattered about the worksheet in various cells. There are no seperators that are common, no common length of text strings I could use to pull every X word etc.
The one common thread I am working with here, is the the data I need to extract ALL begins with the first 4 letters, and containers a total of 8 characters. For example:
A3 - The dogs collar had the name ABCD1234 on it J9 - Today I found a dog collar at the store, and it read ABCD2345 c5 - It says ABCD3456
I'm trying to basically see if there is a way/function within excel that can go through all of the cells and extract anything that says ABCD? (and the 4 wildcards after it)
The Find all function finds them all, but trying to just extract the data ABCD? info.
I'm trying to add some code so that it only runs on the specific sheet or a range of specific sheets - but this list might change in the future) as a worksheet event... When I have been doing this in the past, I have been copying the code to each of the individual sheets but this now seems to be incorrect.
This time, though, I have created the code on one sheet (with a Private Sub Worksheet_Calculate() event) which launches a macro in a separate module - my logic being to have as little code as possible in each of the sheets for copying, pasting, editing purposes, and centralise the main code in the module. However, I've noticed that this code is actually being run on all the sheets - even those I do not want it to run on. I thought, while developing this code, that it would only run on the one sheet it had been added to (e.g. right click the worksheet name, view code).
I'm having a problem to use the macro for opening a specific worksheet in a workbook. My plan to setup the workbook to open the first worksheet no matter which worksheet that was last saved and close.
What i have in mind is like below macros but it is not working.
Private Sub Workbook_Open() Worksheets("Main").Activate End Sub
Attached is the sample for the workbook. Test file.xlsm‎
I've tested and I'm getting errors trying to reference a range in a specific sheet.
I want to sum a range for further calculation and can get this to work perfectly if I don't specify a sheet - but it sums the range in the wrong sheet as the code is within a With statement range:
[Code].....
I've checked that wsSumm contains the 'Summary' worksheet value and that's all fine, I've also tested the following:
[Code] ....
I've also tried replacing wsSumm with Worksheets("Summary") and Worksheets(1), but get exactly the same results, so no it's not a fault with the worksheet variable. Also tried using Application.WorksheetFunction.Sum, but again exactly the same results.
So, why I can't sum the range on the specified worksheet? Is is something to do with being inside a With statement for another worksheet - though I've not come across problems with this before...
Part of my code adds a Worksheet to the selected Workbook and then re-orders them alphabetically, but one of the Worksheets (Called home) should always remain at position 1. Is there a way to dictate exactly which postion it should be in so that I can place it there after the sort is complete?
