Summary Worksheet - Join Several Workbooks Into One?
Apr 8, 2014
Im currently working on making a workbook as a summary/join of several workbooks. All cells are formatted in the same way, and only Row 1 is the same in all workbooks.
How to combine several excel files into one file?
My issue is that when i run this macro, the rows are overwritten for every workbook runned through.
I end up with only the contents of the last copied workbook.
I guess my EndRow is wrong, or the copy function, since the offset is not set properly.
Code:
Sub ExtractData()Dim basebook As Workbook
Dim mybook As Workbook
Dim FNames As String
Dim MyPath As String
Dim SaveDriveDir As String
Dim Cnum As Integer
[code].....
View 1 Replies
ADVERTISEMENT
Jun 11, 2014
I am attempting to write code for a macro that can cycle through about 30 excel workbooks and merge the data. getting the raw data on one sheet is not a problem, but I also need to sort similar data into corresponding columns while merging such that all data from the workbooks with a certain column heading will be in a single column with a single heading on the summary sheet. The problem is that the column headings on the source workbooks are not always standardized, i.e. "F high", "high F". Each sheet has several columns that look like the one below, with a header at the top and a series of numbers. (please ignore the dashes, I just used them to line up the columns in this post, in excel each value is in a different cell)
F Low---F High---V Low
721-----999---804
721-----999---0
721-----999---0
711-----720---786
711-----720---713
My vba skills are very basic, so I have been approaching this problem with a mountain of if..else and InStr commands, which doesn't seem like the best method and isn't working.
View 3 Replies
View Related
Jun 27, 2013
How to do this with a macro but I want to join 6 workbooks together too make 1. Master sheet (7th copy). Below are the points of interest and a couple of questions.
1- My six books are all identical in cols.
2- The six books all have in col A my own ID number, no ID number is the same in any worksheet.
3- If I can get all 6 books together then the ID will start at #1 and finish approx at 225,000, in accending order.
4- All books have only 2 worksheets inside, Sheet1 and Sheet2 .
5- I don't want to delete or loose any data in the 6 books already made. Just make a 7th copy of the 6 .
6- The 6 w/books are called
6A- Each w/book contains approx 40,000 rows except last , approx 22,000
UPTODATE STAKESWTD SECT 1
UPTODATE STAKESWTD SECT 2
UPTODATE STAKESWTD SECT 3
UPTODATE STAKESWTD SECT 4
UPTODATE STAKESWTD SECT 5
UPTODATE STAKESWTD SECT 6
7- There are no functions in any of the w/books, just other macros which I want in the master copy.
8- Can the 7th copy be called UPTODATE STAKESWTD MASTER
View 2 Replies
View Related
Jul 17, 2007
I have been asked to create grand summary workbook that basically copy and paste from a few workbooks in different folders location in a network drive in this grand summary. The sheet to copy from these other workbooks is named as "summary" and the location and filenames are as follow:
P:Section 1RegisterNorth.xls,
P:Section 2RegisterSouth.xls,
P:SectionRegisterEast.xls
The data can be found from A7 to R7 downwards in the "Summary" sheet tab in each of the workbook above.
The data are updated every week and as such I hope to have a macro create to first clear the old data and update the new data.
View 9 Replies
View Related
Nov 14, 2008
A) Is this even possible to do in Excel? I've seen similar ideas in foums, Excel help, etc., but they are all limited to worksheets within a single workbook.
B) My front half logic will work if I can do the back half. But if that's not possible, is there another way to accomplish this?
View 5 Replies
View Related
Aug 14, 2009
I have a set of workbooks, with multiple sheets within each which I receive each month from field units. The formats are identical.
What I want to do is to extract data from one column on one specific sheet within each workbook to a summary sheet on a new workbook. In the snapshot below, I would like to collect data from the "Actual" column (in yellow) and then paste it on a summary sheet.
Monthly reportingEntity 13. Risk reportingJanuaryMarket Risks - LoansJanuaryTargetActualVarNumber of competitors 110%Market share 1%1%0%Ranking in market 110%Concentration of portfolio – region-wise (number)1%1%0%Concentration of portfolio – region-wise (value)1%1%0%Market growth rate 1%1%0%Inflation rate 1%1%0%
This would appear in a new summary worksheet as below: (the cell labelled "Entity 1" would then appear as the column header in the summary sheet.)
Monthly reporting - summary sheet3. Risk reportingTarget rangeEntity 1Entity 2Entity 3Market Risks - LoansActualActualActualNumber of competitors 1Market share 1%Ranking in market 1Concentration of portfolio – region-wise (number)1%Concentration of portfolio – region-wise (value)1%Market growth rate 1%Inflation rate 1%
The steps I imagine are:
1. Open all workbooks in a specified folder (folder name upon prompt)
2. Search each workbook for a sheet titled "Risk Reporting"
3. Copy the specified cell (for the column header) and the specified column into a new sheet in a new workbook
4. Move on to fill up the next column, and so on ...
Also is there a way to order the copying so that the columns always line up in a specified order? (e.g. Entity 1, followed by 2, followed by 3 ...). One way I guess is to fix the column headers in my summary sheet, and then fetch the data from the corresponding worksheet, by matching the names.
View 9 Replies
View Related
Mar 26, 2013
I have created a template workbook for individuals who work on different sites. The spreadsheets used by each individual have the same headers. The sheets all sit in the same folder in dropbox.
I am wanting to produce a summary workbook within the dropbox folder that automatically populates when an individual updates their workbook.
I have attached mock example of the individuals worksheet for your information.
The questions that I have are as follows:
1. Is it better within an individuals workbook that they record their activity all on one sheet as opposed to having a spreadsheet per months activity? It seems tidier to have a sheet per month but does this make it more difficult to produce a summary workbook?
2. The individual is required to record a patients individual drugs on separate lines but they need to record a unique identifier, age, *** and month worked. Do they need to record all this for each line of drug or is there an easier way?
3. How should the summary sheet be produced - pivot table or sheet with formulas linked to the individuals workbooks?
View 3 Replies
View Related
Feb 15, 2009
I am starting within a workbook with a standard invoice/form. During the course of a month this invoice will be copied 20 to 30 times within the workbook and the amounts changed each time. Is there a way that I can:
a) Have amounts from 2 of the cells (say E30 and E31) within each new invoice worksheet automatically included on a summary page? These cells are calculated by formula.
b) (This one would be nice but is not essential) Have each new invoice worksheet that is added (by copying) automatically numbered sequentially in a cell (say A2) and also re-named with this number. The first existing invoice would be manually numbered and each additional invoice would follow from there.
View 5 Replies
View Related
May 27, 2009
I browsed through existing threads and other sites and didn't find this exact scenario. I'm sorry if this type of question is common, but I wouldn't know. I appreciate any help and thanks for trying and offering your 2 cents!
OK. What I have is a table with over 20 columns that I use to sort and AutoFilter the 200+ rows of data. Several of the columns use Data Validation which require data to be from lists. Conditional formatting is used very often throughout the sheet.
Now, I want to have a second worksheet that will be almost identical to the original, but only accept rows that have certain values (let's say 3 of the 8 possible values) a specific column. These values are text values that appear in a list, and the column uses Data Validation to accept values only from that list. This second worksheet should be like if I Autofiltered the original table by check-marking 3 of the 8 available filter options for that column, but I need this specific 'view' of the data for certain purposes and my own reference.
In a perfect world, this second sheet would automatically mirror the original sheet's changes... But I don't know if that's possible? Although Excel is a very flexible and powerful tool, flexibility is relative once your tastes in data organization become more and more specific! Please let me know if any of this is impossible, so I'll stop trying to figure out how, haha.
Even if it won't 'automatically' mirror the original, I still would like to view the information in this way!
Also, I am very good with formulas and finding my way around Excel's features, but I'm not very experienced with the VBA programming or custom macro-writing.
View 12 Replies
View Related
Nov 22, 2005
Is there a way to populate a summary worksheet with the details of 4 other
worksheets, all of which have the same number of columns (A:J with the labels
on row 5) yet have different numbers of rows (each sheet will have a
different number of rows with the data beginning on row 6 in each sheet).
Is it possible to do without running a macro so that the summary sheet will
look to be automatically populated with as many rows as there are on sheet
number 1, then look to be populated with as many rows as there are on sheet
number 2, etc.
View 9 Replies
View Related
Jul 31, 2007
Is it possible to automatically populate a summary worksheet, based on matches in other worksheets within the workbook which match a particular date?
I have a workbook with 15 worksheets--each sheet is setup like a database with 4 columns (fields). One column is for the date.
I would like to populate a summary sheet that serves as an executive summary of all "records" which match a particular date.
View 10 Replies
View Related
Apr 18, 2006
I have several tabs (worksheets) representing purchases for a specific year.
There is one tab (worksheet) that is a Summary of all purchases for all
years. How do I get Excel to automatically update the Summary worksheet
anytime one of the other worksheets are modified?
View 9 Replies
View Related
May 11, 2006
I'm trying to do is a unique list or summary of a worksheet. First there are 4 columns that need to be read, then from this list a new list must be created using advanced filter with unique value. Then the first 4 columns must be deleted and replaced with the new 4 columns, in the third summary the totals for Gender 1-3 are aded together depending by the quality and the same for gender 4-5. I'm attaching a sample file to show how the summary is supposed to look when is finished. I need to do this in code because the rows may vary depending on the brands, genders and qualities. I deleted some info to reduce the file size
View 2 Replies
View Related
Mar 9, 2007
I have a summary worksheet for data contained within 50 worksheets that follow it. The summary page has 50 rows corresponding to the 50 worksheets. The rows count the number of entries there are in each column in its corresponding worksheet. Because of the large amount of data ( dates, prices, names) that gets added to the worksheets, it is difficult to find the latest changes.
Ideally, if data within the worksheets were added in the last three days, I would like to see the cells on the summary worksheet that changed to be highlighted. Alternatively, I could add a column in the summary worksheet which would show the date of the most recent change in the cell that corresponds to its worksheet.
I tried working with excel formulas but could not find an ideal solution. A problem I ran into was that the dates do not sit in a consecutive range, i.e. columns B,E,F,J, and H contains the dates. The other have numbers, prices. So looking for a Max number is troublesome becasue of the long formula I would have to create for each row.
Does any one have a VBA solution?
View 6 Replies
View Related
Sep 23, 2006
I need the correct syntax to consolidate ranges from several worksheets into a summary worksheet - all in the same workbook. I am building the Array on the fly, and I keep getting errors. (Subscript out of range being the most recent).
The code now is opening only one workbook so I can keep it simple. It iterates through the sheets collection, and builds the array.
Private Sub cbConsolidateToRollups_Click()
Dim MyArray() As Variant
Dim Source As Variant
Dim SheetNames As Variant
Dim SingleQuote, DoubleQuote
SingleQuote = Chr(39)
DoubleQuote = Chr(34)
'set the directory to Rollups
ToPath = Application.DefaultFilePath & "Cost Tracking" & "Rollups"
ChDir ToPath ....................
View 9 Replies
View Related
Sep 14, 2013
I have 12 Workbooks (each for every month) name Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec
These workbooks contains something like the following
Name
Days of Vacation
Something Else#1
Something else#2
Something else #3
[Code] .....
I want something to loop through the months and copy all rows for mary in a summary sheets and sum the Days of Vacation from Column B.
Note that The first Workbook has some data, the 2nd Workbook is the Jan and the 13 Workbook is the Dec, the 14t is the Summary Workbook
VB:
Sub SearchForString()
Application.Calculation = xlCalculationManual
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
LCopyToRow = 2
[Code] .....
View 7 Replies
View Related
Oct 28, 2009
I have 8 Sheets in my worksheet with orders from my customers. Column C is their PO# and Column M is the Status of the order. What im looking to do is set up a summary sheet with the List of 8 customers that tells me what PO#'s are in a particular status.
I need a formula to list all PO's that are in "Fabricating" or "Completed" Statuses.
I have gotten this far:
=if(Sheet1!M25="Fabricating",Sheet1!C25,if(Sheet1!M25="Completed",Sheet1!C25,"None"
which works perfectly for the individual rows, but i need it to do it for all rows (1-2500). If i do Sheet1!M2:M2500, i loose it.
View 14 Replies
View Related
May 3, 2012
I have a workbook that has 31 sheets representing the days in a month. Each sheet is identical to each other. The naming convention for each sheet is as follows...(1,2,3,...31). The very last sheet is named "Summary". On this sheet I have in column A the dates from the beginning of the month dragged down to the last day of the month in this format xx/xx/xx. To the right I have it equal to a particular cell (M33) corresponding to the date. So for 04/01/2012, the value in the cell to the right is (='1'!M33). Instead of repeating the process of "=" the click the next tab and get M33 on that tab....is there a faster way of doing this where I can enter a formula and drag it down pulling all the "M33" from each sheet?
View 6 Replies
View Related
Aug 22, 2009
I am trying to find the total rows in multiple worksheets and to copy the row count to a summary sheet.
For Each ws In Workbooks("HR.xls").Worksheets
With ws
If ws.Name "Summary" Then
If ws.Name "Pivot" Then
View 9 Replies
View Related
Dec 23, 2013
excel 2010. This workbook has 4 worksheet(Process Engineer,OSBL,OSA,Lab Operator) I want to know what is the best excel formula/function to summary this 4 worksheet.
Example:I want a formula/function to summary all the statement from 4 worksheets and total number of answer "1" per statement from 4 worksheet.
Sample Statement below
"Demonstrate Interpersonal (People-to-People-) Skills" Question:What is the formula if above statement contains this statement in 4 worksheet?As i checked the total is 4 then What is the formula to get all total answered ICC on this statement from 4 worksheet?
View 2 Replies
View Related
Dec 28, 2007
In another thread I was able to access another workbook with a listbox.
I'm now trying to do the same thing with a command button. Here's what I have so far without success.
Private Sub CommandButton4_Click()
With Range("'Estimate_Database.xls'!ELECTRICAL")
Worksheets(.Parent.Name).Activate
.Select
End With
Electrical.Hide
DataSheets.Hide
End Sub
The file path being C/Documents/Estimate_Database
View 5 Replies
View Related
Jul 28, 2013
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
View 5 Replies
View Related
Jul 6, 2009
I have several workbooks (called Cons_age0, Cons_age3, Cons_age6 and Cons_age12) that I would like to combine into one workbook called Cons. Each of the previous workbooks should now be a worksheet within Cons by their name.
View 6 Replies
View Related
May 8, 2013
I have a set of excel files that I need to combine into one worksheet. The files have the same number of rows but the number of column will vary. The combined worksheet needs to have the data from each workbook appended to the last column.
Example:
FileA.xlsx
A
B
C
D
1
Question 1
1
10
20
2
Question 2
30
40
50
[Code] ........
View 5 Replies
View Related
Feb 12, 2009
i have a group of workbooks all housed in the same folder 'ro24_ws' - who's path is -
C:UsersdavezDocumentseq
o24_ws
what i am looking for is some code to copy a worksheet named 'ro24' from each workbook within this folder into a single workbook
View 9 Replies
View Related
Jun 11, 2008
I've the following inherited macro which basically opens a CSV text file and copies the contents to another workbook + other things.
Sub GetFile()
' GetFile Macro
Dim ws As Worksheet
Sheets("Menu").Select
' Set Path and Filename and Import
PathName = Range("E4").Value
Filename = Range("E5").Value
ControlFile = ActiveWorkbook.Name
Workbooks.Open Filename:=PathName & Filename
' Setup Temp worksheet
TabNameTemp = "Temp"
' TabName = Range("A2").Value
TabName = "CSV File"....................
with the error: "Run-time error '1004':. Excel cannot insert the sheets into the destination workbook, because it contains fewer rows and columns than the source workbook. To move or copy the data to the destination workbook, you can selct the data, and then use the Copy and Paste commands to insert it into the sheets of another workbook." Nothing has changed in the CSV file or the Workbook with the macros.
View 2 Replies
View Related
Jan 4, 2010
attached files.
1. I want to link my sales detail worksheet to summary worksheet. When i insert an amount of 500 in "Sales details" worksheet on certain date then the amount will appear 500 and falls under the respective week and customer name also.
2. When there is two or three delivery order at the same week, the amount that i type in sales details also will auto sum up and reflect in the "Summary" worksheet.
View 12 Replies
View Related
May 31, 2012
I have a worksheet in excel that has financial data for several departments and schools. The data is across 2 columns and 948 rows. I need to break the data down into multiple workbooks so I can use and existing email macro to send them to managers. There is a unique character that separates the data and I was able to use a previously written macro to enter page breaks which is below, but I'm having trouble using the same unique character (or page break) to put the data into separate workbooks.
Dim PBRange As Range, PB As Range
With ActiveSheet
Set PBRange = .Range("A1:A1000")
For Each PB In PBRange
If PB.Value = "***********" Then
.HPageBreaks.Add before:=PB
End If
Next
End With
View 3 Replies
View Related
Jan 21, 2009
I looking at attempting to combine 26 spreadsheets all into one with a macro. Basically i have 26 spreadsheets detailing all items placed into different suspesne accounts, these are on going so they can be up to 2000 lines long. All 26 spreadsheets are contained in one folder with a backup of each.
Columns B - F detail the payment being applied.
Columns G - J detail the payment being removed.
I was hoping the would be a way for a macro to look into each one and if there is data in column E (value) and not in column I (vlaue removed) then return the whole line onto a new worksheet. So basically after i have run the macro i would have one worksheet with all outstanding items on instead of having to open each one and copy and pasting.
The lines will always vary on each workbook as to where the outstanding payments is and im using excel 2003.
View 9 Replies
View Related
Oct 5, 2009
I have to report on 6 departments each with 6 sub departments weekly. First I need to consolidate 6 ( move/copy worksheet to consolidated workbook using a macro) separate worksheets (all saved in the same folder) per department into single workbook (preferably generated automatically by macro/code). I then need to repeat the above process for another 6 files per sub department. The output files should be pasted as "values" while retaining all other formatting. In essence I need to automate the whole right click on tab, select move or copy worksheet function in excel to take the load out of doing it manually.
View 2 Replies
View Related