Is it possible through code to disable calculating when typing characters such as: 3 / 4 ? I need to accomplish this without a dependency on cell format. I am looking to have the above example value as "3 / 4"
View 6 RepliesIn L7,L12,L15 I entered a formula to calculate the subtotal of unpaid transactions. I need a macro in Col L to automatically subtotal unpaid amounts in Col K and quantity total in Col H when I click on the 'SUBTOTAL' command button.
For example if I click on L12 and click the 'Subtotal' command button, that would generate a subtotal amount in L12 of the unpaid transactions in K8:K11 and additionally in H12 create a quantity subtotal of unpaid transactions in G8:G11. See Attached File
I have a spreadsheet with ~30,000 rows of data that is using the "NOW" function. The endusers are having an issue with the spreadsheet having to recalculate everytime they run a filter as the spreadsheet recalculates the formulas everytime.
Is there a way to turn the autocalculate off for this spreadsheet only when it is opened?
I need the formulas to calculate once only when the sheet is initially opened but then turned off after that. When user closes the spreadsheet, the autocalculate needs to be turned back on.
I need to figure out a way to calculate days between textboxes and have the added total show in a text box.
Ie.
If there is a start and end date in scenario 1, the total will show in the total days text box.
If there is a start and end date in scenario 1 and 2, the total will show in the total days text box.
so on and so forth. Is there way to do this?
Total days
Scenario 1
Start Date
End Date
[Code]....
I have a table arranged by columns into SETS of results. I am looking for a way to mark all the columns of a set as false if any one column of the set is false.
View 4 Replies View RelatedI am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View RelatedThe IF function has the following syntax:
IF(logical_test,value_if_true,value_if_false)
My questions is,
If I don't want the function to take any action in the case of the logical test is false, what do I write in the "value_if_false" field?
I have the following cells set up in a worksheet.
I have the following formula set for each of the cells -
=IF(U5>1,U5-1,T5)
=IF(T5>1,T5-1,S5)
=IF(S5>1,S5-1,R5) and so on.
Serial No.1 Serial No.2 Serial No.3 Serial No.4 Serial No.5 Serial No.6
#VALUE!#VALUE! #VALUE! #VALUE! 1005 1006
The T5, S5 and R5 are (I thought) the "False" value which would be returned, but all I am getting (if for example T5 was blank) is #Value
I am including the entire code. It does a regression analysis on data for a second degree polynomial. In doing so, it creates a worksheet called Regression. So I test first to see if this sheet already exists within the workbook and then ask the user to delete it if it does. I've stepped through the function and the function is always returning False whether Regression exists or not.
View 5 Replies View RelatedThe user has a workbook that opens external workbooks, one being a Guard CheckSheet which the operators have to fill out every morning shift.
What currently happens is when they fill out their checks it close the workbook and sets a togglebutton back in the main workbook to true (puts a tick in the box).
This part works fine, but i need the box to clear (set to false) every day at 6am.
I have timers setup that work if i run through the code, but when i check the next day, the tick is still in the box.
Im not sure if its because the workbook is inactive for so long because the operators mainly have their timesheet workbook open for the majority of their shift?
Im currently playing around with having it clear based on the time of day when then Window_Activates or DeActivates, but that relys on them actually changing windows at that exact time or within a certain time frame.
I've tried to work around an issue so many different ways that I could easily ask a dozen questions about why something I tried couldn't work, but if I could just fix the original issue I wouldn't need the workarounds.
I think I need to query data using this format:
SELECT [Fields]
FROM [DataSource] WHERE
(
((S.LabelDate>={d '2008-08-19'}) And (S.LabelTime>'0500')) And
((S.LabelDate
Is there another formula that I could use that would return YES or NO instead of TRUE or FALSE? This is the formula that I am currently using.
=COUNTIF(BG_WADDRESS,D2)>1
I guess the answer for this is simple but can't find the answer.
AB1FALSE IF TRUE THAT A4 = TEST12TRUE IF TRUE THAT A4 = TEST23FALSE IF TRUE THAT A4 = TEST34TEST2IF ALL ARE FALSE = ""
Excel tables to the web >> Excel Jeanie HTML 4
In Column A I have the following values below.
Y
Yes
N
No
Questions how do you created a formula, Example If Cell A2 = Y or Yes Cell B2 will be 1, if not then 0.
Currently I was successful in writing this formula =IF(BB2="Y","1","0") but this formula only returns the value for Y, not Yes
The setup here is I have multiple codes for a product. Coding structure is as follows (options are contained in parantheses):
N -(T,P) - (5L,6,7,8) - (DFL,DJL,DBL,UEDF) - P - (1,6,9,16,19,1H,1H9) - (g,s,blank) - (a,blank)
Clearly, there are a ton of options. What I'm doing is screening those codes and breaking them down into their component parts.
ex) NT6UEDFP1a: N - T - 6 - UEDF - P - 1 - a
ex) NT6DFLP16: N - T - 6 - DFL - P - 16
I'm trying to do multiple if/then scenarios for each option. However, the way I have it now, I'm getting a FALSE when I switch between these two examples (the dfl works, the uedfp generates false). (there are other codes which is why the first line is there. I'm just having trouble with this particular "nt/np" group)
=IF(OR(LEFT($A$14,2)="np",LEFT($A$14,2)="nt"),
IF(OR(MID($A$14,4,3)="dfl",MID($A$14,4,3)="dbl",MID($A$14,4,3)="djl"),[code].....
In the estimate form I have attached, I want it to auto figure shipping by placing a X in front of shipping type. Which it is doing but how can I get it to show $0.00 instead of false when no X is placed in front.
View 3 Replies View RelatedI have 2 columns of data: Column A is basically postcodes, but just the 1st part and Column B is a #2. If somewhere else on the sheet I type in the postcode IE. SW19 it will show besides it in my lookup the number 2. However if I type in a postcode that is not listed in Column A, I'd like to to return the value 1. I cannot figure this out. My code is:
View 3 Replies View RelatedHow can I hide the word false. My report looks funny with false all over the place.
View 5 Replies View RelatedThe first being that when the first if condition is not met, it is displaying false. The formula should be set up with multiple if statements and then display 0 if all conditions are false. What am I missing? Why won't it work for all the conditions or display a 0?
Second problem is that when I try to add the last if formula to accommodate the drop down option of 60 months (5) excel is giving me an error in the formula. It doesn't matter if I type in the if statement or cut and paste. Why won't it work for this option. A sample spreadsheet is attached. The formula is cell F6 highlighted in yellow.
I have a spreadsheet that contains certain formulas based on constants stored in another sheet. I have created this formula now which goes like this
=IF(C3=Staff_Profile!$C$5,IF(Staff_Profile!$C$2="Expat",2000," "))
The above formula work on two conditions :
1) the staff has joined in a particular month
AND
2) the staff profile is "Expat"
If both conditions are satisfied then the formula applies 2000 $ recruitment charges , else it is 0 (zero)
While it returns 2000 as true value where it is required, for rest of the cells it returns value "FALSE", which I dont want to see. I need to see 0 (ZERO). I am confused , as to how this can be achieved.
i have a code that i am using but however when I click on the cancel it is giving me a false in the cell when all I am want is to cancel and leave the information in the cell. Here is an example of the code i am using.
View 4 Replies View RelatedI need to display FALSE in cell A5 where cell A1 displays the words "completed", "cancelled", "Rejected" or "Resolved" AND do not have a corresponding date in cell A2. If there is a date in A2 - I want to display true.
However, if A1 displays the words "Approved", "Submitted for Approval" "In Development" or "App for IA" I want A5 to display True where there is a date in A2 and a False where there is no date in A2.
I am trying to use the IF function to return a false value if the combined sum of a row is not the same as either of the 1st 2 cells. If that makes any sense!
This is the formula I would like to use. =IF(SUM(g3:g9)=g1 or g2 then y if true and x if false. I thought it would be easy but I can't figure out how to do it
I have the below formula and was wondering how to remove false from the cell.
=IF((L2="in progress")*(J2
I've created an equation but when it's false it returns a "0" I tried an IFERROR with no luck.
=IFERROR(IF(AND(C6>="",E6=""),"update system",),"")
I am using the following code in my Macro
Application.ScreenUpdating = False (I set it to "True" at the end of the sub)
But I can still see Excel changing tabs etc.
I think it may be somthing to do with the loop?
The macro is run off a toggle button which then selects a range of cells for the source data for my chart.
Sub ChartDynamic()
Dim x As Integer
Dim r1, r2 As Long
Application.ScreenUpdating = False
'H30 is the Period number
x = Range("H30").Value
Range("W:W").Select
Selection.Find(What:=x, After:=ActiveCell, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=True).Activate........................
when you type True into a General formatted Excel cell Excel returns TRUE. This value cannot be formatted to a 1 (or a -1) by applying a different format. Thus, does Excel have a boolean data type? Or is it something else like a numeric value that for whatever reason is not receptive to format changes.
View 9 Replies View RelatedI have some code that will go through each sheet and protect them, at the same time it hides the column and row headers......
ActiveWindow.DisplayHeadings = False
However, when i set this back to TRUE i can see the headers but i am unable to click on them (ie to highlight the row or column).
I am using the following code to turn off the screen updating during code execution
Application.ScreenUpdating = False
Is there anything that would still show the screen updating desptite being set to 'False'?