I have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:
1)Dead Head Miles 20 + 2) Trip Miles 500 ----times---$2.00 3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00
I have a userform with 35 text boxes on which display data from a worksheet based on a selection made from a combobox.
My problem is that TextBox11 and TextBoxes 15-35 all need to show a value to 2 decimal places i.e 360.00.
I have found the following line of code:
Code:
For Each ctrl In Controls If TypeName(ctrl) = "TextBox" Then ctrl.Value = Format(ctrl.Value, ".00") Next ctrl
Which does the job but unfortunatley it applies it to every single textbox on the form (not just No's 11,15-35) which is a problem as some of the boxes contain dates so instead of 09/05/2012 i actually get 41038.00.
My question is how to I modifiy the above code (or is there an alternative code?) to only apply to the required textboxes?
I want to enter a value in a textbox, search for it in an worksheet, and populate other textboxes with adjacent values if the value is found. Anyway, the problem is that if the value is not found, I get a debug error.
I'm sure there's far better code to do what I need, but I tried to keep it simple. With the above code, it only works if the value is found. If it's not, I get an error. So how do I make it so that if the value is not found, the value of the textbox2 is "Not Found" or something...
Is it possible through code to disable calculating when typing characters such as: 3 / 4 ? I need to accomplish this without a dependency on cell format. I am looking to have the above example value as "3 / 4"
In L7,L12,L15 I entered a formula to calculate the subtotal of unpaid transactions. I need a macro in Col L to automatically subtotal unpaid amounts in Col K and quantity total in Col H when I click on the 'SUBTOTAL' command button.
For example if I click on L12 and click the 'Subtotal' command button, that would generate a subtotal amount in L12 of the unpaid transactions in K8:K11 and additionally in H12 create a quantity subtotal of unpaid transactions in G8:G11. See Attached File
I have a spreadsheet with ~30,000 rows of data that is using the "NOW" function. The endusers are having an issue with the spreadsheet having to recalculate everytime they run a filter as the spreadsheet recalculates the formulas everytime. Is there a way to turn the autocalculate off for this spreadsheet only when it is opened?
I need the formulas to calculate once only when the sheet is initially opened but then turned off after that. When user closes the spreadsheet, the autocalculate needs to be turned back on.
I am working on a "Salary Payment voucher excel Userform".
How can i do it, if i don't want manually fill in the number of working days into the textbox myself, Can i have the userform to automatically fill in the number of days when i initialize the userform.
I have a userform containing 3 textboxes, to calculate derivatives.
User enters two integers in textbox1 and textbox2; and to textbox 3, I need to transfer these values but with a little issue.
For example, user entered 3 to textbox1 and 5 to textbox2. In textbox 3, it needs to show 3x^5. For example, user entered 7 to textbox1 and 2 to textbox2. In textbox 3, it needs to show 7x^2.
So "x" and "^" are our defaults in textbox3.I tried to transfer the numbers that the user enters to cells A1 and A2, -I don't know if this works- but I don't know how to call them to change the text in the textbox.
i have 2 userforms one with textboxes and the other one with listbox and textboxes.
Everytime user input their data(ie:first name, last name, address etc) in the first form the data's going to be saved in Worksheet("customerSheet") and later on to be displayed in the second form. using the listbox you can select the customer's name and the customer info will be displayed in the textboxes.
I have a series of data that acts upon a traffic light system, i.e. Green, Amber and Red. These variables are posted along row 1 for example and there are 10 columns. Per column I have a tick and cross to answer a question. How can I find out how many ticks were on green days, amber days and red days? I have attached an example.
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
There are dates in column C and I need to count how many days are coming due within 90 days of each date based on the today() function but do not exceed the 90 days.
I'm basically looking for a forumla that will count each employees total scheduled work days for the month inserted and then depening upon the day it is will show how many days the employee has left to work for the month.
I have a spreadsheet in 2007. Days across the top for an entire year. So 365 columns. I need a macro to extract the 3 previous days , today's column, and the 3 next days and load to a different worksheet.
HTML worksheet A: 1/1/09, 1/2/09..... 10/17/09, 10/18/09, 10/19/09, 10/20/09, 10/21/09 .... 12/31/09 10 11 ... 14 15 17 12 22 ... 28 a g ... g c d d a ... a
the macro would create a worksheet B(if run on 10/19/09): 10/17/09, 10/18/09, 10/19/09, 10/20/09, 10/21/09 14 15 17 12 22 g c d d a
I need a formula to count how many days hours & mins between 2 dates but included in the formula need to ensure it only counts business days.
Column A 02/09/2011 13:00
Column AO 02/09/2011 13:02
I need in Column AP to show 0 00:02
The formula I have tried using is - =IF(AO3="","",AO3-A3) which doesnt work as instead of showing 0 00:02 it shows 1 00:02. I dont want it to count as 1 day just 2 mins.
Once that has been worked out I need to include WORKDAYS formula to only count working days. I have created the list on 'Controls' Tab Column A10:A47.
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I want to calculate the end date of my German courses. This is how it works:
A course consists of 60 LU*. The course can occur i. e. three times a week: Monday, Wednesday and Friday. In each day the course lasts 2 LU, which means 6 LU each week. There is no course on Tuesday, Thursday, Saturday, Sunday and on holidays. Therefore this type of course that begins on 18-Nov-2013 will end on 03-Feb-2014.
Another course which occurs Tuesday, Thursday and Saturday, and respectively has 2 LU on Tuesday, 2 LU on Thursday and 3 LU on Saturday and starts on 03-Dec-2013 will end on 06-Feb-2014.
Therefore I want to create a worksheet where I set the start date, choose the days and respectively the LU amount on those days. The end date shall be calculated according to these criteria.
The workday function on excel cannot do this and I do not have any programming skills to work with VBA.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
I wanted to determine the number of days between two dates. Specifically, if the initial date is in one month, and the second is in a different month and an output would result a number of days in each month until the final date. BUT I have a large amount of data to do this for in a list view, way to put a formula in excel and just drag down the entire list to get the required information. see below for an example.
The result I'm looking for is the separate the months and only show the relevant months between the two dates in one cell or the adjacent. Something similar to the table outlined below.
Code: Private Sub cmdSearchButton_Click() Dim txtbox As String 'stores lookup value Dim x As Variant 'value for wwid txt box Dim ForeName As String Dim SurName As String Dim wwid As Variant Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code: If isnull(me.comment.value) Then Exit Sub ElseIf me.comment.value = true Then me.comment_date.value = date me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";" me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
