If False Statement
Jun 18, 2007
I have the following cells set up in a worksheet.
I have the following formula set for each of the cells -
=IF(U5>1,U5-1,T5)
=IF(T5>1,T5-1,S5)
=IF(S5>1,S5-1,R5) and so on.
Serial No.1 Serial No.2 Serial No.3 Serial No.4 Serial No.5 Serial No.6
#VALUE!#VALUE! #VALUE! #VALUE! 1005 1006
The T5, S5 and R5 are (I thought) the "False" value which would be returned, but all I am getting (if for example T5 was blank) is #Value
View 9 Replies
ADVERTISEMENT
Jan 22, 2014
I've created an equation but when it's false it returns a "0" I tried an IFERROR with no luck.
=IFERROR(IF(AND(C6>="",E6=""),"update system",),"")
View 3 Replies
View Related
Aug 5, 2014
The formula I am having issues with is:
=IF(L14="YES",IF(B14="","",NETWORKDAYS(B14,IF(AH14="",TODAY(),AH14),IF(L14="NO",NETWORKDAYS(B14,IF(V14="",TODAY(),V14))))))
I'm looking for formula to return a value based on the amount of networkdays between 2 dates.
Column L has a drop down for
"YES" and "NO"
If "YES" is selected then I need the formula to subtract AH from B (if B is blank I don't want the formula to return anything)
if AH has no date then I want it to use todays date.
If "NO" is selected then I need the formula to subtract V from B (again, if B is blank I don't want the formula to return anything)
if V has no date then I want it to use todays date.
The formula seems to work for everything as it is EXCEPT when L is "NO" it only return FALSE.
View 3 Replies
View Related
Aug 22, 2014
On sheet 3 column d i have a vendor number. I am trying to create a formula in column M (same sheet) that will say "True" if the vendor number in column d is also listed on sheet 2, column A (Rows 2-148)
View 2 Replies
View Related
Jan 7, 2010
if Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
View 2 Replies
View Related
Nov 24, 2011
=IF($T$50=Controls!$B$2),"GO",IF(AND($E$52=3,Controls!$B$3=1.3,$U$1=8,$AB$1>=Controls!$B$2),"GO","")))
Why do I get a FALSE statement with this formula when T50=1, i want it to be blank.
View 9 Replies
View Related
Jun 16, 2012
Write if statement or any other formula: if cell C3 is less then 0 then "over due", if = 0 then "due" and if more then zero then "not due yet" otherwise preferably nothing, because that would mean that the cell is empty.
View 6 Replies
View Related
Mar 31, 2014
Column A: T/F
Column B: True/False
Here's what I want in a sentence: If one of the cells in grouped row is "T", column B = True, if not then column B = False.
(row groups are separated by a blank row)
Example)
Col A,Col B
TTRUE
FTRUE
[Code] ....
I came up with following formula:
=IF(MATCH(TRUE,INDEX(ISBLANK(A1:A17),0),0)>MATCH("T",A1:A17,0),TRUE,"")
It checks to see if blank cell is found before "T" but it doesn't look rows above.
inincubus.grouprows-1.xlsx
View 3 Replies
View Related
Dec 29, 2008
I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
View 4 Replies
View Related
Feb 3, 2014
I'm trying to write an If statement that only changes the cell if it's true.
If its false it leaves what is in the cell alone.
This is what I have so far:
HTML Code:
=if(a5>=today(),"payment",----if not, don't change what is in the cell-----)
View 3 Replies
View Related
Oct 2, 2007
I'm looking to use an if/and statement to give back a true of false but it doesnt seem to be working, I'll give an example, I want excel to search a set of cells to see if its blank and another cell to see whats written there(from a pull down menu) and if both of them are true I conditionally format to go green, otherwise stay white. It works for one cell, condition below:
=AND(Anoop!B3="IIC",NOT(ISBLANK(Anoop!C3)))
but I cant get it to do this
=AND(Anoop!B3:13="IIC",NOT(ISBLANK(Anoop!C3)))
i.e search the entire column
I was also wondering if it was possible if it found an "IIC" in B8 how I could get it to check C8, D8 etc..
View 9 Replies
View Related
Jul 2, 2014
How to leave a cell truly empty if the criteria of my IF statements is untrue. Currently, I'll write something like:
[Code] ....
But for some reason, when I copy and paste the resulting range of values elsewhere (to rid myself of the formula that determined them), the cells that did not return a value (where the statement is FALSE), are not recognized by a "Go To Special > Blanks" request, until I select all of the "empty cells" and clear them manually. Yet when I try to do a search on the same range for an empty space, I get no hits.
View 3 Replies
View Related
Nov 6, 2009
I have an IF statement that I need to look at different cells and return different values if ture or false, depending on what is selected in cell J2
Cell D2
if J2 = "FMB/FPI" then retrun the value of cell Y7
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then return the value of cell Y7
Cell E2
if J2 = "FMB/FPI" then retrun the value of cell AC7
if J2 = "FPI/FPI" then then retrun the value of cell AC7
if J2 = "FMB/OTHER" then N/A
Cell F2
if J2 = "FMB/FPI" then N/A
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then then retrun the value of cell AC7
View 4 Replies
View Related
Sep 10, 2013
Perhaps a bit cryptic but here is where I'm looking for.
Cell A1 gets the value YES (or NO) assignment by the user.
Cell B1 has some calculated value let's say 4 based on the formula If(A1="YES";2+2)
Now If the user assigns "NO" to A1 the value of Cell B1 becomes FALSE (return value of second part of the If statement)
I do not want the value of B1 changed if A1=NO and to stay the same (4)
View 2 Replies
View Related
Feb 9, 2010
I have a formula in a cell which attempts to grab a value on another sheet that's dynamically changing in real-time (it's a live stock price changing in realtime via DDE). My objective is to grab this current live stock price when it is between the times of 10:30 AM and 5:00 PM, bt as *soon* as it goes past 5 PM, I want this formula cell to display the very *last* (ie.the one just before) value it had just before the time rolled over past 5 pm.
Here's my formula:
View 9 Replies
View Related
Jul 27, 2009
I have a worksheet built that obtains info from Sheet1(ACV) and enters it into Sheet2(Payment1), however when I run the process, only Line 10 fills and then it stops. I need to loop the first statement of the code, so that it fills all of column 1 until there is no info to fill then I assume the rest of the code will fill in the worksheet accordingly.
View 3 Replies
View Related
Apr 23, 2014
I have a table arranged by columns into SETS of results. I am looking for a way to mark all the columns of a set as false if any one column of the set is false.
View 4 Replies
View Related
Nov 15, 2006
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies
View Related
Jul 28, 2009
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
View 5 Replies
View Related
Oct 1, 2008
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies
View Related
Feb 14, 2012
I am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
View 9 Replies
View Related
May 5, 2014
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
View 5 Replies
View Related
Jan 6, 2009
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
View 9 Replies
View Related
Jan 17, 2009
The IF function has the following syntax:
IF(logical_test,value_if_true,value_if_false)
My questions is,
If I don't want the function to take any action in the case of the logical test is false, what do I write in the "value_if_false" field?
View 9 Replies
View Related
Dec 22, 2008
Is it possible through code to disable calculating when typing characters such as: 3 / 4 ? I need to accomplish this without a dependency on cell format. I am looking to have the above example value as "3 / 4"
View 6 Replies
View Related
Nov 19, 2009
I am including the entire code. It does a regression analysis on data for a second degree polynomial. In doing so, it creates a worksheet called Regression. So I test first to see if this sheet already exists within the workbook and then ask the user to delete it if it does. I've stepped through the function and the function is always returning False whether Regression exists or not.
View 5 Replies
View Related
Nov 16, 2011
The user has a workbook that opens external workbooks, one being a Guard CheckSheet which the operators have to fill out every morning shift.
What currently happens is when they fill out their checks it close the workbook and sets a togglebutton back in the main workbook to true (puts a tick in the box).
This part works fine, but i need the box to clear (set to false) every day at 6am.
I have timers setup that work if i run through the code, but when i check the next day, the tick is still in the box.
Im not sure if its because the workbook is inactive for so long because the operators mainly have their timesheet workbook open for the majority of their shift?
Im currently playing around with having it clear based on the time of day when then Window_Activates or DeActivates, but that relys on them actually changing windows at that exact time or within a certain time frame.
View 3 Replies
View Related
Aug 20, 2008
I've tried to work around an issue so many different ways that I could easily ask a dozen questions about why something I tried couldn't work, but if I could just fix the original issue I wouldn't need the workarounds.
I think I need to query data using this format:
SELECT [Fields]
FROM [DataSource] WHERE
(
((S.LabelDate>={d '2008-08-19'}) And (S.LabelTime>'0500')) And
((S.LabelDate
View 9 Replies
View Related
May 29, 2009
Is there another formula that I could use that would return YES or NO instead of TRUE or FALSE? This is the formula that I am currently using.
=COUNTIF(BG_WADDRESS,D2)>1
View 9 Replies
View Related
Nov 8, 2009
I guess the answer for this is simple but can't find the answer.
AB1FALSE IF TRUE THAT A4 = TEST12TRUE IF TRUE THAT A4 = TEST23FALSE IF TRUE THAT A4 = TEST34TEST2IF ALL ARE FALSE = ""
Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
View Related
