Getting Rid Of 0 When Returning False Statement Using IF
Jan 22, 2014I've created an equation but when it's false it returns a "0" I tried an IFERROR with no luck.
=IFERROR(IF(AND(C6>="",E6=""),"update system",),"")
ADVERTISEMENT
Nested If Statement Returning FALSE Instead Of Value?
Aug 5, 2014The formula I am having issues with is:
=IF(L14="YES",IF(B14="","",NETWORKDAYS(B14,IF(AH14="",TODAY(),AH14),IF(L14="NO",NETWORKDAYS(B14,IF(V14="",TODAY(),V14))))))
I'm looking for formula to return a value based on the amount of networkdays between 2 dates.
Column L has a drop down for
"YES" and "NO"
If "YES" is selected then I need the formula to subtract AH from B (if B is blank I don't want the formula to return anything)
if AH has no date then I want it to use todays date.
If "NO" is selected then I need the formula to subtract V from B (again, if B is blank I don't want the formula to return anything)
if V has no date then I want it to use todays date.
The formula seems to work for everything as it is EXCEPT when L is "NO" it only return FALSE.
UDF Always Returning False?
Nov 19, 2009I am including the entire code. It does a regression analysis on data for a second degree polynomial. In doing so, it creates a worksheet called Regression. So I test first to see if this sheet already exists within the workbook and then ask the user to delete it if it does. I've stepped through the function and the function is always returning False whether Regression exists or not.
View 5 Replies View RelatedISTEXT Returning False
Nov 12, 2009I'm trying to apply the istext to a cell that has multiple values eg: [car, boat, truck] so I have setup the cell with the formula
=istext(c147 = "car",1,0)
it returns false constantly. Is that becuase of the other values separated by comma's in that same cell?
Is there a way to do this so that I don't have to go through 300+ cells that have multiple values to separate them?
Stop Returning False Value When Using GetOpenFilename
Nov 29, 2009I have several buttons on my userforms that use the following ...
View 12 Replies View RelatedStop IF Function Returning FALSE
Oct 12, 2007I have two columns A & B. If I enter "Short" into Col A, I want "Long" to automatically appear in Col B, and vice versa. This is the code I have created so far. =IF(C4="Short","Long",IF(C4="Long","Short",IF(C4="",""))). This works but when I paste the formula into all cells in Col B, I get "FALSE" showing up in every cell. How can I stop the "FALSE" from populating every cell in Col B while Col A remains blank?
View 4 Replies View RelatedIf Statements: Non-numerical Characters Returning False When True
Jun 24, 2009I have a formula in column A of the following sheet. The problem is that when the entry in cell H contains a letter as well as a number then the formula in column a returns 0.
Also if the value for false in the forumula is changed from 0 i.e to 1 or 2, then a value is returned in column A (this is shown in the red highlighted cells).
AssetRegexample.xls
Does anyone have any idea why this is?
If False Statement
Jun 18, 2007I have the following cells set up in a worksheet.
I have the following formula set for each of the cells -
=IF(U5>1,U5-1,T5)
=IF(T5>1,T5-1,S5)
=IF(S5>1,S5-1,R5) and so on.
Serial No.1 Serial No.2 Serial No.3 Serial No.4 Serial No.5 Serial No.6
#VALUE!#VALUE! #VALUE! #VALUE! 1005 1006
The T5, S5 and R5 are (I thought) the "False" value which would be returned, but all I am getting (if for example T5 was blank) is #Value
If Statement - True False For Duplicates
Aug 22, 2014On sheet 3 column d i have a vendor number. I am trying to create a formula in column M (same sheet) that will say "True" if the vendor number in column d is also listed on sheet 2, column A (Rows 2-148)
View 2 Replies View RelatedIF Statement Returns Either Value Error Or False
Jan 7, 2010if Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
Get FALSE Statement With Formula - Blank?
Nov 24, 2011=IF($T$50=Controls!$B$2),"GO",IF(AND($E$52=3,Controls!$B$3=1.3,$U$1=8,$AB$1>=Controls!$B$2),"GO","")))
Why do I get a FALSE statement with this formula when T50=1, i want it to be blank.
If Statement With Multiple True But Only One False?
Jun 16, 2012Write if statement or any other formula: if cell C3 is less then 0 then "over due", if = 0 then "due" and if more then zero then "not due yet" otherwise preferably nothing, because that would mean that the cell is empty.
View 6 Replies View RelatedIF Statement Logic In Columns - True / False
Mar 31, 2014Column A: T/F
Column B: True/False
Here's what I want in a sentence: If one of the cells in grouped row is "T", column B = True, if not then column B = False.
(row groups are separated by a blank row)
Example)
Col A,Col B
TTRUE
FTRUE
[Code] ....
I came up with following formula:
=IF(MATCH(TRUE,INDEX(ISBLANK(A1:A17),0),0)>MATCH("T",A1:A17,0),TRUE,"")
It checks to see if blank cell is found before "T" but it doesn't look rows above.
inincubus.grouprows-1.xlsx
IF Statement: Just Returns FALSE, Despite The Result Being True
Dec 29, 2008I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
If Statement That Doesn't Change Cell If False
Feb 3, 2014I'm trying to write an If statement that only changes the cell if it's true.
If its false it leaves what is in the cell alone.
This is what I have so far:
HTML Code:
=if(a5>=today(),"payment",----if not, don't change what is in the cell-----)
IF/and Statement To Give Back A True Of False
Oct 2, 2007I'm looking to use an if/and statement to give back a true of false but it doesnt seem to be working, I'll give an example, I want excel to search a set of cells to see if its blank and another cell to see whats written there(from a pull down menu) and if both of them are true I conditionally format to go green, otherwise stay white. It works for one cell, condition below:
=AND(Anoop!B3="IIC",NOT(ISBLANK(Anoop!C3)))
but I cant get it to do this
=AND(Anoop!B3:13="IIC",NOT(ISBLANK(Anoop!C3)))
i.e search the entire column
I was also wondering if it was possible if it found an "IIC" in B8 how I could get it to check C8, D8 etc..
How To Leave Truly Empty Cell If Criteria For IF Statement Is FALSE
Jul 2, 2014How to leave a cell truly empty if the criteria of my IF statements is untrue. Currently, I'll write something like:
[Code] ....
But for some reason, when I copy and paste the resulting range of values elsewhere (to rid myself of the formula that determined them), the cells that did not return a value (where the statement is FALSE), are not recognized by a "Go To Special > Blanks" request, until I select all of the "empty cells" and clear them manually. Yet when I try to do a search on the same range for an empty space, I get no hits.
IF Statement: Look At Different Cells And Return Different Values If Ture Or False
Nov 6, 2009I have an IF statement that I need to look at different cells and return different values if ture or false, depending on what is selected in cell J2
Cell D2
if J2 = "FMB/FPI" then retrun the value of cell Y7
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then return the value of cell Y7
Cell E2
if J2 = "FMB/FPI" then retrun the value of cell AC7
if J2 = "FPI/FPI" then then retrun the value of cell AC7
if J2 = "FMB/OTHER" then N/A
Cell F2
if J2 = "FMB/FPI" then N/A
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then then retrun the value of cell AC7
How To Make False Part Of IF-statement Not To Change A Cell
Sep 10, 2013Perhaps a bit cryptic but here is where I'm looking for.
Cell A1 gets the value YES (or NO) assignment by the user.
Cell B1 has some calculated value let's say 4 based on the formula If(A1="YES";2+2)
Now If the user assigns "NO" to A1 the value of Cell B1 becomes FALSE (return value of second part of the If statement)
I do not want the value of B1 changed if A1=NO and to stay the same (4)
IF Statement Not Returning Correct Value
Nov 4, 2011I am trying to count how many entries in a worksheet say "yes" depending on a value in another column - formula is:
=IF('PM Tracker'!$D$3:$D$1000=C15,COUNTIF('PM Tracker'!$V:$V,"Yes"),"None")
Value in cell C15 is equal to "43-11" (week number and year)
This keeps returning "none" as the answer but I know 3 entries satisfy the "yes" criteria in Column V for week 43-11.
Want To "ignore" The FALSE Result Of An IF Statement
Feb 9, 2010I have a formula in a cell which attempts to grab a value on another sheet that's dynamically changing in real-time (it's a live stock price changing in realtime via DDE). My objective is to grab this current live stock price when it is between the times of 10:30 AM and 5:00 PM, bt as *soon* as it goes past 5 PM, I want this formula cell to display the very *last* (ie.the one just before) value it had just before the time rolled over past 5 pm.
Here's my formula:
Need First Statement To Loop Until "False"
Jul 27, 2009I have a worksheet built that obtains info from Sheet1(ACV) and enters it into Sheet2(Payment1), however when I run the process, only Line 10 fills and then it stops. I need to loop the first statement of the code, so that it fills all of column 1 until there is no info to fill then I assume the rest of the code will fill in the worksheet accordingly.
View 3 Replies View RelatedMarking Whole Group FALSE If One Member Is FALSE?
Apr 23, 2014I have a table arranged by columns into SETS of results. I am looking for a way to mark all the columns of a set as false if any one column of the set is false.
View 4 Replies View RelatedCount Of TRUE & FALSE And Assign 1 To True And Yes And 0 To False And No When I Total The Rows
Nov 15, 2006I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View RelatedUtilize A Select Case Statement In Target Intersect Statement
Jul 28, 2009I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
If Statement Within If Statement (recognize The Cell)
Oct 1, 2008I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedExcel 2010 :: Use One Set Statement To Set Second Statement?
Feb 14, 2012I am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
ADODB SQL Statement ORDER BY Statement
May 5, 2014I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
Switch Statement Is Too Long For VBA. To Make The Switch Statement Work Over Two Lines
Jan 6, 2009I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
IF False Do Nothing
Jan 17, 2009The IF function has the following syntax:
IF(logical_test,value_if_true,value_if_false)
My questions is,
If I don't want the function to take any action in the case of the logical test is false, what do I write in the "value_if_false" field?
