I thought I saw a thread where someone used AutoFilter as a one liner like
Range("VFILTER").AutoFilter 23, "True"
but for some reason this does not work. The filter is active, but it doesn't pay attention to the field or criteria part.
I am trying to get the below autofilter working but to no avail, its just putting the text datStart and datEnd in the auto filter, not what I receive in the boxes, see bold line for line in question
Dim datStart, datEnd As Date
Dim strAgent As String
datStart = txtStart.Value
datEnd = txtEnd.Value
strAgent = txtAgent.Text
Range("A4").Select
Selection.AutoFilter
Selection.AutoFilter Field:=4, Criteria1:=">datStart", Operator:=xlAnd, _
Criteria2:="<datEnd"
I´m writting a macro. It works find until a certain point. When I want to change some outputs of the macro without changing the syntax, it display an error mesage while runing the macro. It says Else without If. Which is quite disturbing because the Else was not creating any problem before. Here is my macro before I changed the conditions (this one work nicely)
Sub Copy_Sheet_Beta()
Set wba = ActiveWorkbook
On Error Resume Next
If IsWorkbookOpened("Projekt.xls", "C:Documents and SettingsfrederikSkrivebordRedd Barna") Then
Workbooks("Projekt.xls").Activate 'In case open, just activate "Projekt"
Else
Workbooks.Open Filename:="C:Documents and SettingsfrederikSkrivebordRedd Barnaprojekt.xls"
End If
Set wb = Workbooks("Projekt.xls")
wb.Activate
If Not SheetExists(wba.ActiveSheet. Range("C1").Value) Then
MsgBox "overall doesn't exist!"
Else........................................
Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedI can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View RelatedIm having problem with If/Then/Else Statements Not sure what the problem is. I have a text box a user inputs whatever in to create two new tabs one is the tab name then the next is tab completed. It isnt liking my syntax I have here.
View 7 Replies View Relatedif I copy and Add it created a new workbook not the current on im in. What am I doing wrong?
View 5 Replies View RelatedGetting a syntax error which and I'm not sure what I've done wrong. This is the bit thats causing the problem:
View 2 Replies View Relatedtrying to write a formula in a VB to some cells:
View 3 Replies View Relatedwhat is wrong with this syntax:
View 2 Replies View RelatedI would like to have an email generated when a cell changes to a particular value. I've developed the macro to send the email with a saved attachment.
When I try to OJT-Engineer the text for the module, I can't get it to recognize the macro. It's a syntax issue, it seems.
What I need is for my module to initiate a macro when a cell changes to a value.
This is the code EXACTLY as it appears:
A theoretical question following an empiric result.
For the command “SendKeys”, for instance, take these two lines:
What is wrong with the syntax of this formula?:
COLUMNS(INDIRECT("AverageDemand!$A7:"&A$7))+4
I'm getting #REF errors and I can't work out why...
I have the following code that loops thru and puts the word 'TEST' in column J if column B has a TEXT value of '020'
----------------------------------------------------------------------------------
With Range("J1:J" & Lastrow)
.Clear
Range(.Cells(2), .Cells(.Count)).Formula = "=if((b2)=""020"",""TEST"","""")"
End With
----------------------------------------------------------------------------------
Questions
1) why do I need double quotes "" "" on every argument in the function? Is it because I'm working with TEXT data?
2)I want to use multiple ifs (ie if cell b2 equals '020' OR '030' then put the word 'TEST' in col J). How to change the syntax to do this?
I know this syntax isn't right.
I have a form and a combo box that I want ot fill the items in from cell F22.
Here is my
Sheets(PowerAnalysis.xls).Cells("F22").Value = ComboBox2.Text
What is the best way to get this done? I have searched here and on the web and I can't seem to find any straightforward answers.
In VBA Excel 2000 while ODBC connecting to a dbase file:
parameter=" N0011"
...
ActiveSheet.QueryTables.CommandText = Array( _ ...
"SELECT ... & Chr(13) & "" & Chr(10) & _
"FROM ... & Chr(13) & "" & Chr(10) & _
"WHERE (dbase_file.field1=" & chr(34) + parameter + chr(34) & "... & Chr(13) & "" & Chr(10) & _
"ORDER BY ...")
...
It doesn't work any more in Excel 2003. Of course it works directly such as:
"WHERE (dbase_file.field1=' N0011')
but I couldn't find the way to replace the ' N0011' with the parameter.
It is not the singular issue...
"FROM dbase.file dbase.file " that worked well in Excel 2000, the Excel 2003 "wants":
"FROM 'drivepath'dbase_file dbase_file "
and I couldn' find a way to replace the explicit 'drivepath' with a predefined variable.
I am trying to figure out what a past employee's macros do and how they do it. I would simply like to know what the followin syntax enables you to do:
While ActiveCell <> ""
...
...
Wend
or
While ActiveCell. Offset(5) <> ""
...
...
Wend
[Code] ......
I seem to be having trouble with the syntax the number range after (iPopFreqMax).
I am attempting to create a macro that opens a file named "shrinkage-billing.xls", searches for a variable "PTOSH" in column A, copies the adjacent cell and pastes the data in another worksheet named "Shrinkage Report 2009.xls"
The code follows ...
Got a wee problem with some syntax for a copy function. At the moment the code i have copies the range and pastes to another range which is defined by a cell number. But i need it to paste special (values only).
View 5 Replies View RelatedI would like to know where can I find a good resource to learn about VBA syntax. I have VBA books and there are some examples of code in there but when I'm trying to read someoneelse's code I just get into commands or syntax I don't understand. For example I would like to be able to go some site and decifer what this line (or it's parts) means: If(cnt < MAXTEST, sDigSep & String(MAXTEST - cnt, "9"), "")
View 4 Replies View RelatedIs there proper syntax to combine these two lines of code into one line?
View 2 Replies View RelatedI have a variable array, that is, the first cell of the array is variable and the last cell is variable. I have dimmed the first cell , "firstcell" as a range. I have dimmed the last cell , "lastcell" as a range. I'd like to sort the array but first I have to select all cells in the array. Need the proper syntax to select all cells between "firstcell" and "lastcell" in my macro.
View 2 Replies View RelatedI need syntax using SUMPRODUCT. I have these two lines of code
View 2 Replies View RelatedI want to check something syntax wise about IF Statement
My line of code is as follows
I have a large spreadsheet like this
NephrologyPrinted resent 26.05.09 chased
Nephrology28.04.09 resent 26.05.09Yes
Nephrology28.04.09 resent 26.05.09Yes
Nephrology28.04.09 resent 26.05.09Yes
Nephrology28.04.09 resent 26.05.09Yes
Nephrology28.04.09 resent 26.05.09Yes
There are plenty of other columns, but these are key. The first column is the service type, of which there are 40. I want to have another worksheet that totals all the entries in the third column that don't say 'yes', for each service. So, in this case the first line of my new workbook would say: Nephrology1
If I copy "mysum" contents to a cell and replace "lista" with a defined list, it works just fine. But whenever I run this code, it gives me syntax error.
Sub aaa()Dim i As Integer, myvar As Variant, tester As VariantDim mysum As Variant, lista As Variant,
alpha As Datelista = Sheet2.[D6].ValueWith Worksheets(Range("A10").Value) Do
i = i + 1mysum = Evaluate("SUMPRODUCT(((ISNUMBER(MATCH($B$8:$B$10007," & lista & ",0)))
*($A$8:$A$10007>(TODAY()-180))*(($E$8:$E$10007)+($F$8:$F$10007)+($G$8:$G$10007)+($I$8:$I$10007)+($K$8:$K$10007)))))
myvar = Evaluate("=TIME(10,0,0)>" & mysum) Loop Until myvarEnd Withtester = 35 - Sheet2.[c10]
alpha = mysumMsgBox "VALID for [" & lista & "] after " & i & " Day(s).
hours in last 180 days after " & i & " Day(s) will be (" & alpha & ")"End Sub
I'm looking for syntax to break all links in a workbook using VBA. I've found the below through independent research but I'm receiving a type mismatch error.
Code:
Sub BreakLinks()
'Macro Purpose: Break all links in the active workbook
Dim vLinks As Variant
[Code].....
Always have problems getting my head round the syntax of the indirect function and am unable to find anything similar that's been asked.
I want to perform an operation on two numbers where the user selects which to use (add, subtract, multiply or divide) entered into another cell like this:
******** ******************** ************************************************************************>Microsoft Excel - 200701 - LCC.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutC3C5=
ABCD14+5*2****3Normal*9*4****5Indirect*#REF!*Sheet3*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.