Syntax For Variable Array

Aug 11, 2009

I have a variable array, that is, the first cell of the array is variable and the last cell is variable. I have dimmed the first cell , "firstcell" as a range. I have dimmed the last cell , "lastcell" as a range. I'd like to sort the array but first I have to select all cells in the array. Need the proper syntax to select all cells between "firstcell" and "lastcell" in my macro.

View 2 Replies


ADVERTISEMENT

SUMPRODUCT Syntax With Variable VBA

Dec 14, 2009

I need syntax using SUMPRODUCT. I have these two lines of code

View 2 Replies View Related

Incorrect Syntax For Setting Value Of Variable

Nov 26, 2013

I'm not sure where my syntax is wrong, and I can't think of what to google to learn more about the possible options I have when creating and declaring the value of variables.

I am simply trying to define the variable aWB as a workbook, whose name is found in cell B6 on the worksheet named "Start" in the workbook named "DW1". This seems to make sense to me, but I am not typing it correctly.

Code:
Dim aWB As Workbook
Set aWB = Workbooks("DW1.xlsm").Worksheets("Start").Cells("B6").Value

View 9 Replies View Related

Syntax Correction: Combine Text With Variable

May 8, 2009

I have the following VBA code and try to sum the range from B2 to CY2 for DA2; then B3 to CY3 for DA3, etc. Therefore I use the for loop. It results in "Application defined or Object defined error".

View 4 Replies View Related

Correct Syntax To Add Workbook Name That Is Stored In Variable Into Formula?

Feb 24, 2014

I have the following code, which executes just fine:

[Code].....

The problem is that I need to run this again in a different column, and the data is held in another sheet that I have given the variable StepTwo to.

I'm not sure of the syntax to do this. Basically - this is what I need the code to do:

[Code] ....

Understandably this is totally incorrect, but it's the best I can do to explain what I'm actually trying to do....

The two parts of SUMIF are both held in a workbook that I've given the variable "StepTwo" to. Both sets of data are also held on Sheet(1) of that workbook.

View 7 Replies View Related

VBA To Output From Array Based On Variable In One Element Of Array

May 2, 2013

I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.

That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.

View 9 Replies View Related

If Else Syntax: Change Some Outputs Of The Macro Without Changing The Syntax

Jul 19, 2006

I´m writting a macro. It works find until a certain point. When I want to change some outputs of the macro without changing the syntax, it display an error mesage while runing the macro. It says Else without If. Which is quite disturbing because the Else was not creating any problem before. Here is my macro before I changed the conditions (this one work nicely)

Sub Copy_Sheet_Beta()
Set wba = ActiveWorkbook
On Error Resume Next
If IsWorkbookOpened("Projekt.xls", "C:Documents and SettingsfrederikSkrivebordRedd Barna") Then
Workbooks("Projekt.xls").Activate 'In case open, just activate "Projekt"
Else
Workbooks.Open Filename:="C:Documents and SettingsfrederikSkrivebordRedd Barnaprojekt.xls"
End If
Set wb = Workbooks("Projekt.xls")
wb.Activate
If Not SheetExists(wba.ActiveSheet. Range("C1").Value) Then
MsgBox "overall doesn't exist!"
Else........................................

View 2 Replies View Related

Using Array Variable Instead Of Array Formula

Jun 30, 2006

i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example

View 4 Replies View Related

Last Value For Given Variable In Array

Apr 2, 2014

I have a large table of data sorted by date and I need to get the last value for a given variable. in certain instances using LOOKUP(9.999999E+307,sheet1!A:A) works but not when I'm trying to get values for past dates

Her is an example table:

Date
Month Value
Variable
1/2/14
1
11

[Code]...

If i need to find the last value for the month of February, in this case 514, what combinations of formulas should I use? I feel like this should be easier than I making it out to be.

View 5 Replies View Related

Variable Array In VLookup

Jul 25, 2014

Basically have a spreadsheet to track an athletic competition going of for the purposes of a fantasy game (like fantasy football). The scores from each event are being copied and pasted into a data pages and then other pages pull from that for calculations. I'm using rankings (rank.eq equation) on a calculation tab, and then using those rankings on a leader-board tab find placement via the VLookup function. The issue I'm running into is ties, when two people are ranked the same. I've been playing with this:

=IF(ISERR(VLOOKUP($J17,Men!$A$1:$G$43,7,FALSE)),VLOOKUP($J17,Men!$A$1:$G$43,7,FALSE),
VLOOKUP($J16,INDIRECT("Men!A" & LOOKUP(J16,Men!A1:A43)+1):$G$43,7,FALSE))

Where it checks for an error in the Vlookup, if its not an error then it does the VLookup, if it is then if looks up the previous ranking and the VLookup array uses Lookup to find the position of the last rank, increments it by one and starts the new Vlookup there.

View 10 Replies View Related

VBA Selecting A Variable Array

Apr 3, 2009

I've successfully copied the array of equations using the VBA that Pjoaquin enlightened me with from my last thread. The outcome was Sheet2!A2:O2 being successfully populated with the equations from my first sheet... but here comes the problem: I'm looking to autofill A2:O2 down to the last record in Column P. But the number of records in this table is varable.

View 2 Replies View Related

Cannot Change Variable Value Through Array

May 12, 2009

I am trying to change the variable value in my following code through array.
What I want is that both the statements

Debug.Print testarray(0) & "........" & testarray(1) & "......." & testarray(2)
Debug.Print custname & "........" & custaccount & "......." & worthcredit & vbCrLf & vbCrLf 

should deliver me the same values i.e changedname 123456 and true

for testarray(0),testarray(1),testarray(2) i am getting the values but I am not able to change the variable values for custname ,custaccount and worthcredit, although I am accessing the same elements.

Here is full ....

View 12 Replies View Related

Assign Array To Variable

May 19, 2009

My question is about assigning an entire array to a single variable. In this case, I want to assign an entire array to one element of another array.

View 6 Replies View Related

Get Address Of Array Variable?

May 13, 2013

Code:
Dim MyArray as Variant
Dim Address
MyArray = Range([a1], [b10])
For varRow = 1 To UBound(MyArray, 1)
' I want to know the current address of the cell right here,
' For instance I want to know I'm working with A1 right here
' Is that possible?

Next I guess my question is how do I find out the originating address of the cell I'm working with in an array. I need to check the font color of A1,B1,C1 etc while working in that range and I have no idea how to access it.

View 1 Replies View Related

How To Assign An Array To A Variable

May 15, 2008

how to do is the assignment of GoodArray1 to CurrentArrayToUse, i.e. "CurrentArrayToUse = GoodArray1" below:

Global NextArrayToUse()
Global CurrentArrayToUse()
Global PreviousArrayToErase()
Global GoodArray1(), GoodArray2(), [etc]
Global CurrentGuessNumber As Integer

[bunch of code, part of which assigns a number to CurrentGuessNumber, then the following...]

Select Case CurrentGuessNumber
Case 1
CurrentArrayToUse = GoodArray1
NextArrayToUse = GoodArray2
Case 2
CurrentArrayToUse = GoodArray2
NextArrayToUse = GoodArray3
PreviousArrayToErase = GoodArray1
ReDim PreviousArrayToErase(0, 0)

View 9 Replies View Related

Array Formula With Variable Condition

Jan 7, 2009

I am running an array formula which is working fine except that I now need to add a further condition: that a one of a number of values in cells C1:C8 is found in range $a1:$A500. I've tried Or with comma separation and with * separations but nothing seems to work.

Can anyone advise me of the syntax?

View 9 Replies View Related

Using Array Variable To Populate Range

Dec 17, 2008

I'm trying to populate a worksheet using arrays.

View 14 Replies View Related

Declare An Array With Variable Size

May 7, 2009

I need to create an array with a variable as it size For instance:

View 2 Replies View Related

Set VBA Variable With Index/Match Array

Jan 5, 2010

I created an Index/Match array forumula in the worksheet. It works.

View 2 Replies View Related

Referring To Variable Array In Formula?

Mar 14, 2012

Is it at all possible to refer to a array that may change in a formula?

For example I need to use a Vlookup formula, however the table array will change depending on the value of another cell.

I need the user to be able to select the column heading that the lookup should work off from a drop down list. So if the user selects column heading C, the array should start from column C though it will always end at column Z. If the user selects column heading Y the array would be Y:Z.

View 7 Replies View Related

Build A Variable Length Array

Apr 10, 2007

I am trying to do is to build an array from a series of cells that may or may not contain text.

For example cells A1:A6 may be equal to red, orange, yellow, green, blue and purple,
but each cell may also be blank.

So I might also have blank, blank, yellow, blank, blue, purple.

Is there a way I can make an array of just {yellow, blue, purple}? and then the next time it may be {red, blue}

Or can I index only cells that have text?

In the end, I just need a way to make a selection from only those cells that have text.

View 9 Replies View Related

Refer To An Array Variable In A Formula

Nov 30, 2008

I'm trying to use arrays in a macro!

Here's my
Sub ArrayTest()
'
' ArrayTest Macro
'
Dim Array1() As Variant, Array2() As Variant
Dim R As Integer, ilR1 As Integer, iLR2 As Integer
ilR1 = Cells(Rows.Count, 1).End(xlUp).Row
iLR2 = Cells(Rows.Count, 7).End(xlUp).Row
ReDim Array1(1 To ilR1)
ReDim Array2(1 To iLR2)
For R = 1 To ilR1
Array1(R) = Cells(R, 1) & Cells(R, 2) & Cells(R, 3)
Next R
For R = 1 To iLR2
Array2(R) = Cells(R, 7) & Cells(R, 8) & Cells(R, 9)
Next R
For R = 2 To UBound(Array1)
If WorksheetFunction.CountIf(?????, Array1(R)) > 0 Then Cells(R, 4) = "old" Else Cells(R, 4) = "new"
Next R
'
End Sub

Basically, the macro concatenates the content of three columns from two different tables into two arrays. Array1 contains the current stuff and Array2, the old one. If I CountIf items from Array1 into the content of Array2, I should get what's new (count 0).

Now, ? in the code should refer to the content of Array2. How do I do that?

The errors I get are 424 object required [Array(iLR2)], 1004 method 'Range' of object '_Global' failed [Range(Array2) or Range(Array2(2), Array2(iLR2))], or type mismatched [Array2].

View 9 Replies View Related

Dynamic Array As Public Variable

Mar 6, 2010

How can I make a dynamic array public?
I have to Dim it so it stays valid only inside the sub.

Public MyVar()

Sub test1()

Dim MyVar()
ReDim MyVar(1 To 4)
For x = 1 To 4
MyVar(x) = "ffffff"
Next x
End Sub

Sub test2()

For x = 1 To 4
Range("A" & x) = MyVar(x)
Next x
End Sub
Error I get is 'MyVar(x) = Subscript out of range'

View 9 Replies View Related

Vlookup Table Array Variable

Jul 8, 2006

=VLOOKUP($B$54,'R:OperationsPerformance ReportingSales ReportsFTW North - INT2006Daily7 July7-02-2006[Sales TL Base Report.xls]MAXimize Summary'!$A:$BA,E$3,FALSE)

I would like to make date in the table array (07 July7-02-2006) a variable, but keep getting an #NA with my limited experience. From what I can gather the single quotes are causing the problem?

View 9 Replies View Related

Count Sheets For Variable Array

Apr 25, 2007

I have a workbook with several sheets, some are permanent and then there are certain sheets whose quantity varies depending on how many sub-contractors we use on a given job. The workbook starts as a template and there are 10 sub-contractor sheets to start with, if we only have 5 subs then the last five sub sheets are deleted. The sheets start out with the tabs named "Sub 1" "Sub 2" etc. but after the book is set up the sheet tab names are changed to the sub name. I've included some partial code below, with the goal being to run code on the sub-contractor sheets no matter the tab name or how many there are.

So the workbook has 5 "non-sub" related sheets, I was thinking that if I could do a sheet count -5, and get that number into the array it would accomplish what I want to do. And if someone added a new sheet it would still be processed with the others.

Public Sub SubConEstNum()
On Error Resume Next
Dim S As Worksheet, names As Variant, i As Integer
names = Array(6, 7, 8, 9, 10, 11, 12, 13, 14, 15)
For i = LBound(names) To UBound(names)
Set S = Sheets(names(i))
S.Range("T3").Value = S.Range("S3").Value
S.Range("T1").Value = S.Range("S1").Value
S.Range("T2").Value = Sheets("Bill").Range("K1").Value

Next i
End Sub

View 3 Replies View Related

Pass Variable Into Array As Element

Oct 2, 2007

I am trying to pass information that is filled by user in a userform into an excel sheet. Let's say a user would click on a control button in a userform and Macro would ask him what value to store for the first variable. If user clicks one more time then Macro would identify that it was a second click and ask what value to set for a second variable. It is easy to do with limited number of variables, but is it possible that the variable which stores a number of clicks would become a number for variable to store the value?

1 click - a1 = ..
2 click - a2 = ..
....
n click - an = ..

If not possible - which way to search a solution?

View 5 Replies View Related

Fill Array Variable From Range

Jun 14, 2008

I've created a userform that uses parallel arrays to display strings that another macro pulls from a worksheet and the 2nd array holds strings of what the user types in. I've uploaded a workbook with the userform in it.

Part 1:
I want to pass the 1st array (pSource) in during the initialization of the array and I want to send back the 2nd array (pUser) from the submit button, but I have no idea how to work it. I've tried a couple things from older posts in the forums, but had no luck with them.

Part 2:
The arrays will be the same size, but the size isn't a constant. Is there any way to change the size of an array? I've been using 0 to 3 for testing the rest of the userform, but for the final product, I'll be passing an array in of a variable size.

Private pSource(3) As String 'Modify to work with variable size
Private pUser(3) As String 'Modify to work with variable size

View 3 Replies View Related

Make A Column Array Variable Within A Function

Aug 18, 2009

How do I make a column array variable within a function? I've done nested vlookups to get a column number, but the function I'm using doesn't use a "number", it uses a column aray. '=AVERAGEIFS(L:L,K:K,">="&B$2,K:K,"<="&B$3). The "L:L" needs to be moved according to Market, (or column choosen).

View 2 Replies View Related

Replace A Constant With A Variable In An Array Formula.

Oct 1, 2007

I have the following array function that I am trying to get to work properly:

ActiveCell.FormulaArray = "=SUM(IF(NCR!O2:O100=39326,NCR!Q2:Q100,0))"
39326 is the value of 9/1/2007, and this formula works properly.

I am looking for a way to use this formula but replace 39326 with whatever date is in the first row of the same column as the active cell when it is run.

That is, if the macro was run with cell B8 as the active cell, "39326" would be replaced with whatever value was in cell B1.

View 9 Replies View Related

Help With Variable Table Array In Vlookup Formula

Dec 11, 2007

I'm working on a project in Excel (for a restauraunt) and I basically need to make a formula to work out what an item is, using it's ID number and referencing the certain menu that it is in.

as you can see the table array is defined in cell E3, but i still get a #N/A result, and when I replace the "E3" in the formula with "Deserts" it produces a result.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved