Autofilter Based On Radio Buttons?
Feb 18, 2014
I need to filter data from row 87 downwards depending on the choices above. Some of the choices could be only one like in the measurement type. That I can take care of but what if the choice is more than one, it could be four and it is not fixed. Is that possible in autofilter? This is when they go to checkboxes where they may have many option. The mounting part is best example of many options. This is the part I can't incorporate to macro. It's somoething dynamic. I can't make my filter autoadjust. So essentially,I wanted to automatically edit the filtering based on those 10 criteria, which is also in ten different columns.Sample work.xlsm
View 1 Replies
ADVERTISEMENT
Feb 10, 2012
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
Is there a quicker way?
View 6 Replies
View Related
Apr 8, 2009
I've got a small problem with radio buttons. I've been asked to add a few to a sheet we use at work, problem I'm having is when I add these new buttons from the forms toolbar and then assign the cell link for them some of the other radio buttons on the sheet asume the cell link of the new buttons and when I change them back the cell link for the new buttons change ? i could understand this problem if I had maybe copied them and modified the copies perhaps but that isn't the case.
View 2 Replies
View Related
May 5, 2008
I am having around 80 - 90 radio buttons in my excel page for filling up the forms, but each time i need to give this to a new user i have to reset all the buttons manually, is there any way where in i can do this in one go and all the radio buttons are reset at once without me doing this manually.
View 9 Replies
View Related
Feb 16, 2007
What code do I need to have behind a command button to carry out an action (for example select cell A1 or B1) depending on which one of two radio buttons are selected? I have tried:
Sub Button23_Click()
If Opt1 Then
Range("A1").Select
End If
End Sub
View 9 Replies
View Related
Feb 22, 2013
I have inherited a spreadsheet that has a text box and a radio form that I cannot delete for the life of me. I can't click to select either one nor right click to do anything. I have an "Approve" and "Reject" button on top of them and those work great. But how do I delete the others?
View 1 Replies
View Related
Feb 25, 2013
I am creating scorecards for our company and ratings are inputted using radio buttons (form control). I have a "clear" macro that clears all fields and radio button values (none is ticket). This macro is called throughout different sheets, as different roles in the company have different KPIs and should be on different sheets. I need a code that detects all radio buttons within a certain sheet and clear their values. I cannot put specific radio button names, as I have a lot.
View 2 Replies
View Related
Feb 22, 2013
I have inherited a spreadsheet that has a text box and a radio form that I cannot delete. I can't click to select either one nor right click to do anything. I have an "Approve" and "Reject" button on top of them and those work great. But how do I delete the text box and reject radio button?
View 2 Replies
View Related
Aug 6, 2008
I have a pair of radio buttons on an Excel 2007 sheet. I want the buttons to be clickable, but have the sheet protected.
Both are defined as unlocked. The Group containing the two buttons is also defined as unlocked.
But when I protect the sheet, one of the two buttons gets the pop-up saying the cell is protected - the other button is fine. I've even tried unlocking the cells behind the buttons, but it still pops up.
View 9 Replies
View Related
Oct 20, 2008
I created two radio buttons on a spreadsheet where a user can select
one button for Yes and the other for No. When I right click these
buttons, I notice the names (shown on the left hand side of the
formula bar) are:
Option Button 3 (for No)
Option Button 4 (for Yes)
I'd like to create a macro that automatically selects the Yes or No
button depending on a cell value in another tab. If the cell value is
1, the macro should select Yes. If the value is 0 the macro should
select No.
I tried running the macro below:
Sub testSelectYesOrNo()
If Not IsEmpty(Sheets("Sheet2").Range("A1").Value) Then
Select Case Sheets("Sheet2").Range("A1").Value
Case Is = 1
Sheets("Sheet1").OptionButton4 = True
Case Is = 0
Sheets("Sheet1").OptionButton3 = True
End Select
End If
End Sub
But when this runs I get a "Run-time error 438 Object doesn't support this property or method"
When I click debug, the text "Sheets("Sheet1").OptionButton4 = True"
was highlighted.
View 9 Replies
View Related
Apr 3, 2014
I was viewing this thread here: [URL] ...
How to add checkboxes and radio buttons.
View 8 Replies
View Related
Dec 15, 2008
I work in the science field and I'm trying to record an observation with some codes within a template. I have 5 different codes (A-E) to choose from and want to display the code that the person has chosen for each of the 6 compounds they are working with.
I started creating these command radio buttons with some code to display the results in part particular cell, but I would need to do this 30 times linking each group together to get what I want. I know there's an easier way to do this but ....
View 6 Replies
View Related
Feb 14, 2012
just wondering if there's a way i can make the Radio buttons and check-boxes in my forms select-able by hitting enter? My form is quite long and it takes too much time for users to always have to grab the mouse and click the box, if they could just tab to the radio box or check box and hit enter to select it it would be awesome!
View 2 Replies
View Related
Jul 31, 2007
I am trying to make a basic worksheet that will have radio buttons. I have searched around for about 2 hours and can not find any documentation on how exactly to create a buttons and make it do what I want. I have also tried F1 in Excel but that hasn't helped any either. I did stumble uppon a file called "Options.xls" when searching this forum but it does not explain how the buttons were made. The only thing i can figure out how to do is basically insert a button onto the document, and rename the label of the button that's about it. I basically want to create a group of (3) or so buttons. If button A is picked, cell D1 will display "x". If button B is picked, cell D1 will display "y", and so on. Is there a link to an example out there that shows how to create and use buttons?
View 2 Replies
View Related
Jun 17, 2014
by using radio buttons or checkbox, or anything similar. Based on the answer, I would like cells to appear below the question, for example in B3 another question would be "how many guests would you like to invite?" and B2 would be their answer but is preset to "0"
View 3 Replies
View Related
Sep 6, 2002
I'd like to insert some radio buttons in a worksheet that activate a hyperlink to a web page and then be able to go back to where I started (ie the radio button)
I can link the button to a macro which was a recording of clicking on a hyperlink. The trouble is when I hit the return arrow to return to the sheet from the web page I go back to the location of the hyperlink not where I started from.
Is there a way to do this with the buttons.
If I can rearrange the sheet to allow for more narrow columns I may be able to just use the hyperlink friendly name argument and do it that way but I'm not so sure I can insert more narrow columns without messing up the layout of the whole sheet. With a button I can float several of them over an area regardless of the width of the columns.
View 1 Replies
View Related
Oct 18, 2006
every week i send out a pivot table to different project co-ordinators and would like a way of having simple option button so that they can have the data by "hours" or "costs" and can use tick boxes for the row fields they want to show, for example, "profession", "workstage"," name","cost rate". The page field will always be "Project" and the Column Field will always be "Period" and " Date"
I then want the pivot table to change automatically to their choices. I am pretty basic with VBA so may need explanantions too. It would save me sending out 10 versions of a pivot table all feeding off the same data! They could actually do something themselves! (i know they could drag the fileds they want into the areas they need them but trust me when i say they are not that advanced, they are good at ticking!!)
View 2 Replies
View Related
Dec 17, 2009
I'm trying to create a form using radio buttons from the "Forms Tool Bar" and not sure I shouldn't be using the "Control Tool Bar"
I've got multiple buttons and wanted to group them so i used the "Group Box" from the Forms tool bar but now there's a box around the buttons (I've turned off Printing for the box) that gets in the way of other text on sheet. I did some searching and thought I read where you could also use the drawing tool bar and draw a rectangle around the buttons which would then let them operate independent of other groups of buttons but that doesn't seem to work so I'm guessing I imagined it. I also noticed that if you don't draw the "Group Box" around the hole radio button box, they don't work with others in the same "Group Box"
I'm not sure if I should use the buttons in the "Control Tool Bar" but I'm thinking I should so that I have the flexibility should I decide to do something different in the future. I'm thinking about using the buttons to hide a sheet as well as select the sheet for printing, but for now one hurdle at a time.
Lastly I tried looking up some information on how to get the "Control Tool Bar" radio button to behave similar to the "Forms" version of the button (i.e. click the button and it appears to alternate from other buttons in the group), however when I place my mouse over the button it selects it rather than letting me change it's state from true to false.
View 8 Replies
View Related
Mar 14, 2009
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
View 3 Replies
View Related
Jun 10, 2013
I have a user form that has one combo box on it that right now references one column of data.
Now I am being asked to have three columns of data and the combo box to show one of the three when a certain criteria is met.
I believe it would be easiest to have an additional combox with a change event when the box is populated with "whatever" in the field
So S:3 to S:5 have A, B, C
And EC:1-EC:59, ED:1-ED:59, EE:1-EE:59 contain the data that should show when S:3, S:4, or S:5 is selected.
If S:3 is selected then the list in EC:1 - EC59 would show and so on.
View 2 Replies
View Related
Aug 20, 2014
I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
View 4 Replies
View Related
Dec 12, 2012
If the user selects French (radio button selection), I want to swap out the existing English text for French and vice versa. One large text box with several paragraphs. Can Excel do this?
View 2 Replies
View Related
Jan 18, 2010
I am at it again and maybe I am asking to do something that is not possible. I am trying to build a program that will allow the user some flexibilty down the road if I am no longer here to support my code. I have a workbook that contains several sheets. The sheets are labled by equipment name. The Sheets themselves contain specific data with regards to the equipment. What I want to do is as follows. Populate a user form with command buttons based off of the worksheet names. The reason for this would be if 2 years from now we add a new piece of equipment all the user will have to do is add a sheet in the workbook and the user form would reflect the new sheet with a new button. Like wise if I delete a sheet in the workbook the user form would refelect that change as well.
View 14 Replies
View Related
May 31, 2014
I have a survey template with several options buttons (made from Form toolbar and grouped by Group Box).I would like to have a check box that would activate these option buttons for specific question if unchecked and vice versa.
I have copy & paste below formula in VB, but is shows 'Run time error 424' & when I Debug it shows 2nd line highlighted by yellow colour.
VB:
Private Sub CheckBox1_Click()
If CheckBox1.Value = True Then [code]....
View 3 Replies
View Related
Mar 14, 2007
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
View 9 Replies
View Related
May 12, 2008
I am looking for a way to have some VBA code running in the background of a worksheet.
I would like the autofilter criteria to be based on a cell reference which can change based on what this cell value is?
View 6 Replies
View Related
May 7, 2014
I have a spreadsheet that is split in two parts , one with headers in row 16 with data flowing down to row 190. In row 192 I have another set of headers with data flowing down from that to row 300.
I have a userform (roughly at cell B13 in the attached) that filters the first block of data into either Company, Syndicate, EU Corporate or ALL. (ignore the other filters) which feature in range B18:B190
What I want it to do, is that when one of the three options is selected, ie Company, is that all rows from 193 down are hidden other than those that are also Company (in the test case there is just one row). The same is true for when Syndicate or EU Corporate are selected in the userform, and if the ALL is selected then none are hidden.
View 2 Replies
View Related
Apr 30, 2009
I populated a listbox with unique items from a list. I am trying to the get result of that listbox to goto Sheet2 and sort the table ( named: data_area) on that sheet. Code using below and attached file with example.
Code from the Userform to execute ....
View 9 Replies
View Related
May 12, 2008
I am looking for a way to have some VBA code running in the background of a worksheet.
I would like the autofilter criteria to be based on a cell reference which can change based on what this cell value is?
View 3 Replies
View Related
May 24, 2008
I am looking for a way to search through several workbooks for a row containing the user's inputted data. I was thinking I could Autofilter each workbook but having trouble getting the code to reference a cell value in another workbook.
Sub Autofilter()
Windows("file.xls").Activate
With "Sheet1"
.AutoFilterMode = True
.Range("A1:EV1").Autofilter Field:=1, Criteria1:"Workbooks("reference.xls"). Sheets(1).Cells(A2)"
End With
End Sub
I would like to have file.xls Autofiltered by the value in cell A2 which is in workbook reference.xls. Am I going about this the wrong way? Auto Merged Post Until 24 Hrs Passes;Here is the code repaired so it doesn't through the syntax error:
Sub Autofilter()
Windows("file.xls").Activate
With "Sheet1"
.AutoFilterMode = True
.Range("A1:EV1").Autofilter Field:=1, Criteria1:=Workbooks("reference.xls").Worksheets("Sheet1").Range(A2).Value
End With
End Sub
But it still isn't working. Something is causing trouble at the With statement...
View 2 Replies
View Related
